MATEC Web of Conferences
Volume 21, 20154th International Conference on New Forming Technology (ICNFT 2015)
|Number of page(s)||7|
|Section||Other Manufacturing Processes|
|Published online||10 August 2015|
Adjustable broaching tool for tolerance compensation in precision manufacturing
IPU, Process Technology, Produktionstorvet, DK-2800 Kgs. Lyngby, Denmark
a Corresponding author: firstname.lastname@example.org
Current manufacturing of precision tools for machining typically requires processes such as grinding, EDM or laser processing in order to comply with high requirements on tolerances. However even tools manufactured by these processes come short, when a new batch of workpieces are supplied, and their tolerances are not compliant. This approach presents a precision broaching tool for adjusting the inner diameter of an external broach. The tool compensates for the manufacturing tolerance chain of tool and workpieces by up to 37 μm. The approach is based on conventional shrink fitting of cold forging tools. A numerical and analytical model of the compression is compared with experimental results.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.