Open Access
Issue
MATEC Web of Conferences
Volume 21, 2015
4th International Conference on New Forming Technology (ICNFT 2015)
Article Number 09010
Number of page(s) 7
Section Micro-Forming
DOI https://doi.org/10.1051/matecconf/20152109010
Published online 10 August 2015
  1. M. Geiger, M. Kleiner, R. Eckstein, N. Tiesler, U. Engel, CIRP Ann.-Manuf. Techn. 50, 445 (2001) [CrossRef]
  2. U. Engel, R. Eckstein, J. Mater. Process. Tech. 125, 35 (2002) [CrossRef]
  3. F. Vollertsen, Z. Hu, H.S. Niehoff, C. Theiler, J. Mater. Process. Tech. 151, 70 (2004) [CrossRef]
  4. Y. Qin, Micromanufacturing engineering and technology (William Andrew, 2010)
  5. J. Jeswiet, M. Geiger, U. Engel, M. Kleiner, M. Schikorra, J. Duflou, …S. Bruschi, CIRP J. Manuf. Sci. Technol. 1, 2 (2008) [CrossRef]
  6. M.W. Fu, W.L. Chan, Mater. Design 49, 774 (2013) [CrossRef]
  7. Z. Tekiner, J. Mater. Process. Tech. 145, 109 (2004) [CrossRef]
  8. I.A. Choudhury, V. Ghomi, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf, 0954405413514225 (2013)
  9. S.B. Chikalthankar, G.D. Belurkar, V.M. Nandedkar, Int. J. Eng. Adv. Technol. 3, 247 (2014)
  10. A. Diehl, U. Engel, M. Geiger, Multi-Mater. Micro Manuf, 147 (2005)
  11. F. Vollertsen, D. Biermann, H.N. Hansen, I. S. Jawahir, K. Kuzman, CIRP Ann.-Manuf. Techn. 58, 566 (2009) [CrossRef]
  12. Q. Wang, X.H. Dong, H.M. Zhang, H.Z. Li, Y. Shen, T. Nonferr. Metal Soc. 23, 1428 (2013) [CrossRef]
  13. P. Cavaliere, F. Gabrielli, L. Fratini, Proc. 8th Int. Conf. Metal Forming, 405 (2000)
  14. L.V. Raulea, A.M. Goijaerts, L.E. Govaert, F.P.T. Baaijens, J. Mater. Process. Tech. 115, 44 (2001) [CrossRef]
  15. W. Johnson, P.B. Mellor, Engineering plasticity (Van Nostran Reinhold Company, London, 1973)
  16. J.G. Liu, M.W. Fu, J. Lu, W.L. Chan, Comp. Mater. Sci. 50, 2604 (2011) [CrossRef]
  17. J.L. Wang, M.W. Fu, J.Q. Ran, Adv. Eng. Mater. 16, 421 (2014) [CrossRef]
  18. K. Suzuki, Y. Matsuki, K. Masaki, M. Sato, M. Kuroda, Mat. Sci. Eng. A-Struct. 513, 77 (2009) [CrossRef]
  19. H.Z. Li, X.H. Dong, Y. Shen, R. Zhou, A. Diehl, H. Hagenah, …J. Cao, J. Mater. Process. Tech. 212, 653 (2012) [CrossRef]
  20. H. Jiang, Numerical simulation and experimental research on micro bending process of pure copper foil (MSc dissertation, Shandong University, 2013)
  21. N.A. Fleck, J.W. Hutchinson, Adv. Appl. Mech. 33, 295 (1997) [CrossRef]
  22. L. Yu, P. Li, K.M. Xue, D. Wei, Mater. Mech. Eng. 34, 69 (2010)
  23. B. Guo, J. Zhou, D.B. Shan, H.M. Wang, Acta. Metall. Sin. 44, 419 (2009)
  24. J. Zhou, Research on size effects of mechanical property and micro deep drawing of copper foil (PhD dissertation, Harbin Institute of Technology, 2010)
  25. W.L. Chan, M.W. Fu, J. Lu, J.G. Liu, Mat. Sci. Eng. A-Struct. 527, 6638 (2010) [CrossRef]
  26. C.C. Chen, C.P. Jiang, Mater. Manuf. Processes 26, 78 (2011) [CrossRef]
  27. J.T. Gau, C. Principe, J. Wang, J. Mater. Process. Tech. 184, 42 (2007) [CrossRef]
  28. J.T. Gau, C. Principe, M. Yu, J. Mater. Process. Tech. 191, 7 (2007) [CrossRef]
  29. C.J. Wang, X.W. Wang, B. Guo, D.B. Shan, Mater. Sci. Technol. 17, 5 (2009)
  30. A.B. Abdullah, Z. Samad, IOP Conf. Ser. Mater. Sci. Eng. 50, 012069 (2013) [CrossRef]
  31. H.Z. Li, X.H. Dong, Y. Shen, A. Diehl, H. Hagenah, U. Engel, M. Merklein, Mat. Sci. Eng. A-Struct. 527, 4497 (2010) [CrossRef]
  32. Y. Wang, P.L. Dong, Z.Y. Xu, J.P. Wu, Y.S. Zhu, G.H. Lu, J. Exp. Mech. 24, 177 (2009)

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.