Free Access to the whole issue

Open Access

About the conference

Published online: 09 August 2017

• PDF (5.61 MB)

Open Access

Statement of Peer review

Published online: 09 August 2017

• PDF (52.1 KB)

Design, Manufacturing and Management of Technological Equipment and Systems

Open Access

Fundamental and practical aspects concerning the characterization of smart textiles 01001

Gianina Broasca, Gabriela Borcia, Nicoleta Dumitrascu, Marius Cioca, Diana Coman, Nouredine Ourfelli and Narcisa Vrînceanu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101001

• Abstract
• PDF (367 KB)
• References

Open Access

Study regarding the physical-mechanical properties of knits for garments – pilling performance 01002

Alina Mihaela Coldea and Dorin Vlad

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101002

• Abstract
• PDF (3.63 MB)
• References

Open Access

Superficial hardened layer of cut surface by turning 01003

Sorin Mihai Croitoru, Ionelia Voiculescu and Roxana Doina Trușcă

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101003

• Abstract
• PDF (3.57 MB)
• References

Open Access

Regarding the influence of the particle size of crumb rubber from waste rubber on the physical and mechanical characteristics of reclaimed rubber 01004

Dan Dobrotă and Gigel Paraschiv

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101004

• Abstract
• PDF (1.13 MB)
• References

Open Access

Tool machinery vibrations frames comparison concerning welded or moulded manufacturing structures 01005

Dan Ovidiu Glavan and Theoharis Babanatsas

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101005

• Abstract
• PDF (491 KB)
• References

Open Access

Design and construction of an inspection robot for the sewage pipes 01006

Jana Knedlová, Ondřej Bílek, David Sámek and Petr Chalupa

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101006

• Abstract
• PDF (463 KB)
• References

Open Access

Volume optimization of gear trains with spur gears using genetic algorithm 01007

Nenad Marjanović, Nenad Kostić, Nenad Petrović, Mirko Blagojević and Miloš Matejić

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101007

• Abstract
• PDF (622 KB)
• References

Open Access

General aspects regarding the kinematic and dynamic analysis of the fabric take up/cloth roller 01008

Cristian Matran and Nicolae Bercan

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101008

• Abstract
• PDF (238 KB)
• References

Open Access

Load capacity of worm gear transmission from aspect of maximal use of available resources 01009

Aleksandar Miltenović, Milan Banić and Đorđe Miltenović

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101009

• Abstract
• PDF (187 KB)
• References

Open Access

About the best value of rake angle for cutting tools 01010

Eugen Pămîntaş and Felicia Veronica Banciu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101010

• Abstract
• PDF (366 KB)
• References

Open Access

The effect analysis of the morphing concept on the small swept flying wings 01011

Vasile Prisacariu, Mircea Boşcoianu and Ionică Cîrciu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101011

• Abstract
• PDF (1.01 MB)
• References

Open Access

Analysis of the small flying wings performances in the morphing concept 01012

Vasile Prisacariu, Ionică Cîrciu, Doru Luculescu and Laurian Gherman

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101012

• Abstract
• PDF (876 KB)
• References

Open Access

Analysis of justification for applying two gear sets within the universal gear reducers 01013

Milan Rackov, Siniša Kuzmanović, Ivan Knežević, Maja Čavić and Marko Penčić

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101013

• Abstract
• PDF (119 KB)
• References

Open Access

The simulation of operating of a positioning system actuated by electrical stepping motor 01014

Dana Rizescu and Ciprian Ion Rizescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101014

• Abstract
• PDF (379 KB)
• References

Open Access

OOA composite structures applicable in railway industry 01015

Soňa Rusnáková, Milan Žaludek, Milena Kubišová and Vladimír Rusnák

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101015

• Abstract
• PDF (542 KB)
• References

Open Access

Study on the reliability of the underground conveyor belt system installed at Vulcan Mine, the Jiu Valley Basin in Romania 01016

Ovidiu-Bogdan Tomuș, Andrei Andraș and Mihai Magyari

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101016

• Abstract
• PDF (363 KB)
• References

Open Access

Development of elbow rehabilitation equipment using pneumatic muscles 01017

Georgiana Vetrice and Andrea Deaconescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101017

• Abstract
• PDF (397 KB)
• References

Open Access

Comparison between two models of elbow rehabilitation equipment 01018

Georgiana Vetrice and Andrea Deaconescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712101018

• Abstract
• PDF (400 KB)
• References

Management, Modelling and Monitoring of Manufacturing Processes

Open Access

Highlighting product issues during design phase using functional analysis 02001

Felicia Veronica Banciu and Eugen Pămîntaş

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712102001

• Abstract
• PDF (249 KB)
• References

Open Access

Researches regarding cutting tool condition monitoring 02002

Marinela Inţă, Achim Muntean and Sorin-Mihai Croitoru

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712102002

• Abstract
• PDF (1.08 MB)
• References

Open Access

Reliability estimation of the milling machines teeth obtained by welding deposition process 02003

Daniela Maria Iovanas and Adela-Eliza Dumitrascu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712102003

• Abstract
• PDF (999 KB)
• References

Open Access

Comparison of problem solving tools in lean organizations 02004

Maria Virginia Iuga and Liviu Ion Rosca

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712102004

• Abstract
• PDF (129 KB)
• References

Open Access

Visual communication in lean organizations 02005

Maria Virginia Iuga

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712102005

• Abstract
• PDF (1.93 MB)
• References

Open Access

Value Stream Mapping as a tool for the optimization of production – case study 02006

Jolanta B. Krolczyk, Stanislaw Legutko and Anna Szczepańska

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712102006

• Abstract
• PDF (1.94 MB)
• References

Open Access

The modernization of the production system of the selected type of synchronizer ring 02007

Jolanta B. Krolczyk, Stanislaw Legutko and Piotr Bialek

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712102007

• Abstract
• PDF (2.05 MB)
• References

Open Access

Application of IoT concept on predictive maintenance of industrial equipment 02008

Radu Constantin Parpala and Robert Iacob

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712102008

• Abstract
• PDF (1.19 MB)
• References

Open Access

Comparative study between different methods for the efficiency of the production activity in the wood industry 02009

Radu Dan Paltan, Cristina Biriș and Loredana Anne-Marie Rădulescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712102009

• Abstract
• PDF (104 KB)
• References

Open Access

Preliminary study on occurrence of composite material delamination processed by abrasive water jet cutting 02010

Ioan Alexandru Popan, Nicolae Bâlc and Alina Ioana Popan

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712102010

• Abstract
• PDF (3.11 MB)
• References

Advanced Manufacturing Technologies

Open Access

Reduction of dimensional variability of pieces, resulted in AWJ process, using robust design method 03001

Bogdan Barabas, Tudor Deaconescu and Sorin Barabas

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103001

• Abstract
• PDF (473 KB)
• References

Open Access

Researches regarding influence of traverse speed and stand-off distance to the roughness in AWJ process 03002

Bogdan Barabas and Tudor Deaconescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103002

• Abstract
• PDF (816 KB)
• References

Open Access

Study of hydrodynamic behaviour of large bearings depending on the viscosity of the lubricant 03003

Sorin Barabas, Adriana Florescu and Flavius Sarbu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103003

• Abstract
• PDF (1.04 MB)
• References

Open Access

The influence of the weld toe grinding and wig remelting weld toe rehabilitation techniques, on variable stresses, in case of cross fillet welds, reinforced with additional welding rows 03004

Claudiu Babis, Andrei Dimitrescu, Gabriel Iacobescu, Gheorghe Solomon and Oana Chivu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103004

• Abstract
• PDF (1.14 MB)
• References

Open Access

Technological particularities of laser manufacturing 03005

Daniel Besnea, Alina Spanu, Victor Constantin and Dontu Octavian

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103005

• Abstract
• PDF (1.88 MB)
• References

Open Access

The influence of laser heat treatment on the geometric structure of the surface and condition of the surface layer and selected properties of Waspaloy 03006

Aneta Bartkowska, Mateusz Kukliński and Piotr Kieruj

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103006

• Abstract
• PDF (3.58 MB)
• References

Open Access

Technological aspects regarding machining the titanium alloys by means of incremental forming 03007

Octavian Bologa and Carmen Cotigă

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103007

• Abstract
• PDF (1.22 MB)
• References

Open Access

Study of the Formability of Laminated Lightweight Metallic Materials 03008

Claudia Girjob and Gabriel Racz

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103008

• Abstract
• PDF (2.27 MB)
• References

Open Access

Innovative Industrial Technologies for Preventive Anti-Graffiti Coating 03009

Martin Heinisch and Dan Miricescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103009

• Abstract
• PDF (5.54 MB)
• References

Open Access

Factors that influence the quality constant of the manufacturing process for asphalt milling knifes 03010

Daniela Maria Iovanas, Horia Binchiciu, Ionelia Voiculescu and Emilia Florina Binchiciu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103010

• Abstract
• PDF (1.70 MB)
• References

Open Access

Tool life of diamond inserts after laser assisted turning of cemented carbides 03011

Piotr Kieruj and Mateusz Kuklinski

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103011

• Abstract
• PDF (1.90 MB)
• References

Open Access

Measuring unbalance-induced vibrations in rotating tools 03012

Martin Kimmelmann and Thomas Stehle

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103012

• Abstract
• PDF (1.57 MB)
• References

Open Access

Creating and evaluating replicas of surfaces machined by laser beam 03013

Milena Kubišová, Vladimír Pata and Libuše Sýkorová

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103013

• Abstract
• PDF (1.14 MB)
• References

Open Access

Generating of spatial formations composed of carbon atoms as fullerenes and nanotubes type by applying of pulsed electrical discharges to the formation of graphite films on metallic surfaces 03014

Laurentiu Marin

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103014

• Abstract
• PDF (740 KB)
• References

Open Access

Effect of fatigue testing on the properties of Glass-Epoxy composites using the acoustic tool 03015

Younès Menail, Abderrahim El Mahi, Bachir Redjel, Rachid Berbaoui and Mustapha Assarar

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103015

• Abstract
• PDF (1.09 MB)
• References

Open Access

Behavior of some steels at vibrorolling 03016

Gheorghe Nagîț, Oana Dodun, Laurențiu Slătineanu and Marius Ionuț Rîpanu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103016

• Abstract
• PDF (237 KB)
• References

Open Access

Incremental deformation: A literature review 03017

Daniel Nasulea and Gheorghe Oancea

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103017

• Abstract
• PDF (1.96 MB)
• References

Open Access

Some aspects regarding the static behavior of basalt in the machine building industry 03018

Ilie Octavian Popp

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103018

• Abstract
• PDF (539 KB)
• References

Open Access

Systemic analysis of the caulking assembly process 03019

Claudiu Rodean, Livia Dana Beju and Paul Dan Brindasu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103019

• Abstract
• PDF (2.77 MB)
• References

Open Access

Investigation of chips morphology after turning of materials applied in aerospace industry 03020

Marek Rybicki and Piotr Szablewski

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103020

• Abstract
• PDF (1.27 MB)
• References

Open Access

Effect of concentrated energy of laser beam on polymer material 03021

Libuše Sykorová, Vladimir Pata, Milena Kubišová and Jana Knedlová

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103021

• Abstract
• PDF (1.38 MB)
• References

Open Access

Effects of Core Softness and Bimodularity of Fibreglass Layers on Flexural Stiffness of Polymer Sandwich Structures 03022

Oldřich Šuba, Oldřich Šuba jr. and Soňa Rusnáková

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103022

• Abstract
• PDF (338 KB)
• References

Open Access

Prediction of springback in V-die air bending process by using finite element method 03023

Tomasz Trzepiecinski and Hirpa G. Lemu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103023

• Abstract
• PDF (874 KB)
• References

Open Access

Peculiar behaviour of pure ENAW-Al99.5 sheet metal during uniaxial tensile test 03024

Emil Yankov and Maria P. Nikolova

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712103024

• Abstract
• PDF (3.71 MB)
• References

Virtual Engineering

Open Access

Augmented reality application for training in pipe defects ultrasonic investigation 04001

Cătălin Gheorghe Amza, Aurelian Zapciu, Diana Popescu and Octav Teodorescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712104001

• Abstract
• PDF (1.54 MB)
• References

Open Access

Design for Additive Manufacturing, to produce assembled products, by SLS 04002

Nicolae Bâlc and Cristian Vilău

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712104002

• Abstract
• PDF (2.54 MB)
• References

Open Access

Automated system for data acquisition and monitoring 04003

Sorin Borza and Iunia Cristina Borza

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712104003

• Abstract
• PDF (1.90 MB)
• References

Open Access

Experimental modular stand used for studies of the High Tibial Osteotomy 04004

Ileana Ioana Cofaru

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712104004

• Abstract
• PDF (1.84 MB)
• References

Open Access

Simulation of random events for adaptive control systems calibration 04005

Mircea Viorel Drăgoi and Mircea Anton Vasiloni

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712104005

• Abstract
• PDF (186 KB)
• References

Open Access

Virtual model of an automated system for the storage of collected waste 04006

George Enciu, Adrian Popescu, Cicerone Laurentiu Popa and Costel Emil Cotet

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712104006

• Abstract
• PDF (1.99 MB)
• References

Open Access

Automated business process management – in times of digital transformation using machine learning or artificial intelligence 04007

Daniel Paschek, Caius Tudor Luminosu and Anca Draghici

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712104007

• Abstract
• PDF (584 KB)
• References

Open Access

Methodology for computer-assisted optimization of waste flow 04008

Cicerone Laurentiu Popa, Costel Emil Cotet, Radu Constantin Parpala and Tiberiu Dobrescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712104008

• Abstract
• PDF (812 KB)
• References

Open Access

Synergy of modeling processes in the area of soft and hard modeling 04009

Robert Sika and Jakub Hajkowski

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712104009

• Abstract
• PDF (285 KB)
• References

Open Access

Comparing calculated, experimental and finite element analysis punch forces for the same lenght punched contours but with different geometry 04010

Stelian Uțuleanu, Aurelian Vlase, Gheorghe Sindilă and Nicolae Căpățână

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712104010

• Abstract
• PDF (619 KB)
• References

Quality Engineering and Management

Open Access

Improving the quality of the mechanical systems by specific methods in connection with a commercial entity 05001

Claudiu Babis, Andrei Dimitrescu, Gabriel Iacobescu, Gheorghe Solomon and Dan Nitoi

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712105001

• Abstract
• PDF (182 KB)
• References

Open Access

Improvement of catheter quality inspection process 05002

Mariusz Bożek, Agnieszka Kujawińska, Michał Rogalewicz, Magdalena Diering, Paweł Gościniak and Adam Hamrol

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712105002

• Abstract
• PDF (191 KB)
• References

Open Access

Quality Management techniques embedded in Agile Project Development 05003

Raluca Dovleac and Andreea Ionică

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712105003

• Abstract
• PDF (329 KB)
• References

Open Access

Conceptual modelling of human resource evaluation process 05004

Doina Olivia Negoiţă, Anca Alexandra Purcărea, Andreea Dumitrescu and Andronicus Torp

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712105004

• Abstract
• PDF (551 KB)
• References

Open Access

Experimental research regarding the study of surface quality of aluminum alloys processed through milling 05005

Alina Bianca Pop and Mihail Aurel Țîțu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712105005

• Abstract
• PDF (477 KB)
• References

Open Access

Energy recovery from Municipal Solid Waste in EU: proposals to assess the management performance under a circular economy perspective 05006

Elena Cristina Rada, Lucian-Ionel Cioca and Gabriela Ionescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712105006

• Abstract
• PDF (112 KB)
• References

Open Access

Demerit control chart as a decision support tool in quality control of ductile cast-iron casting process 05007

Robert Sika and Michał Rogalewicz

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712105007

• Abstract
• PDF (593 KB)
• References

Open Access

Capability studies, helpful tools in process quality improvement 05008

Carmen Simion

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712105008

• Abstract
• PDF (414 KB)
• References

Transport Engineering and Road Vehicles, Traffic Management

Open Access

Considerations on oversized transportation in the UE(Community) 06001

Mircea Bădescu and Carmen Maria Purcar

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712106001

• Abstract
• PDF (1.65 MB)
• References

Open Access

Improving programming skills of Mechanical Engineering students by teaching in C# multi-objective optimizations methods 06002

Adrian Florea and Ileana Ioana Cofaru

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712106002

• Abstract
• PDF (795 KB)
• References

Open Access

Improving performance of roundabout intersections by optimizing traffic-flow speed 06003

Marinela Inţă

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712106003

• Abstract
• PDF (641 KB)
• References

Open Access

GIS, integrated solution, for efficient administration of Hunedoara County 06004

Eugenia Jornea, Lucian Lupu-Dima and Eduard Edelhauser

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712106004

• Abstract
• PDF (2.01 MB)
• References

Open Access

An empirical analysis of the relation between infrastructure and road accidents 06005

Lucian Lobonț and Lucian Ioan Tarnu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712106005

• Abstract
• PDF (1.21 MB)
• References

Open Access

Development of a drive management system by V2I communication 06006

Alexandra Elisabeta Lörincz, Marius Nicolae Risteiu and Alin Constandoiu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712106006

• Abstract
• PDF (849 KB)
• References

Open Access

Robotized semiautomatic motorcycle transmission development. Electronic and software design 06007

Mihai Neghină, Radu Emanuil Petruse, Sebastian Olteanu, Ioan Bondrea, Lucian Lobonț and Gabriel Stanciu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712106007

• Abstract
• PDF (3.37 MB)
• References

Open Access

Individual risk evaluation and interventions for mitigation in the transportation of hazardous goods: a case study 06008

Elena Cristina Rada, Navarro Ferronato and Vincenzo Torretta

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712106008

• Abstract
• PDF (517 KB)
• References

Open Access

Soot and smoke emissions numerical evaluation for a direct injection (DI) diesel engine 06009

Bogdan Radu, Alexandru Racovitza and Radu Chiriac

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712106009

• Abstract
• PDF (544 KB)
• References

Management and Economic Engineering

Open Access

Solutions to improve the decision-making process for dynamic allocation of resources in military pre-conflict environments 07001

Ioan-Danut Balos, Catalin Cioaca and Mircea Boscoianu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107001

• Abstract
• PDF (227 KB)
• References

Open Access

Study on heredity value in communication skills, for improving individual performance in the workplace 07002

Mihaela Laura Bratu and Dan Miricescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107002

• Abstract
• PDF (572 KB)
• References

Open Access

Occupational emerging risks affecting international virtual project Team Results 07003

Iulia Dumitraşcu-Băldău and Dănuţ Dumitru Dumitraşcu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107003

• Abstract
• PDF (233 KB)
• References

Open Access

A new approach in Supply Chain Processes – Smart Logistics 07004

Olga Bucovetchi, Andreia Elena Simioana and Radu D. Stanciu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107004

• Abstract
• PDF (533 KB)
• References

Open Access

Assessment procedure for the soft skills requested by Industry 4.0 07005

Gabriela Beatrice Cotet, Beatrice Adriana Balgiu and Violeta – Carmen Zaleschi (Negrea)

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107005

• Abstract
• PDF (690 KB)
• References

Open Access

Integrated planning: a sustainable urban mobility concept for the Jiu Valley 07006

Mihai-Ionut Danciu and Sabina Irimie

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107006

• Abstract
• PDF (2.75 MB)
• References

Open Access

Actual state of knowledge in the field of Supply Chain Management 07007

Oana Dumitrascu and Constantin Manuel Hila

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107007

• Abstract
• PDF (297 KB)
• References

Open Access

The connection between absorptive capacity and open innovation in managerial perspective 07008

Cristina Feniser, Florin Lungu and Javier Bilbao

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107008

• Abstract
• PDF (141 KB)
• References

Open Access

Characteristics of the Romanian CIF Imports during the Period 01.01.2016 - 31.10.2016 07009

Wiegand Helmut Fleischer

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107009

• Abstract
• PDF (95.4 KB)
• References

Open Access

Characteristics of the Romanian FOB Exports during the Period 01.01.2016 - 31.10.2016 07010

Wiegand Helmut Fleischer

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107010

• Abstract
• PDF (101 KB)
• References

Open Access

Education, premise for a workforce reconversion trough a Professional Reinvention 07011

Eugenia Jornea, Lucian Lupu-Dima and Eduard Edelhauser

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107011

• Abstract
• PDF (219 KB)
• References

Open Access

Evaluation of the organizational and technical level of a company transitioning into the sixth innovation mode 07012

Valery Maslennikov and Karina Chernitsova

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107012

• Abstract
• PDF (123 KB)
• References

Open Access

Barriers in organizing the Romanian firms in responsibility centers 07013

Gina-Maria Moraru

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107013

• Abstract
• PDF (411 KB)
• References

Open Access

An integrative approach of the marketing research and benchmarking 07014

Gina-Maria Moraru

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107014

• Abstract
• PDF (225 KB)
• References

Open Access

Information support in the assessment of female students as potential entrepreneurs 07015

Paulina Siemieniak and Jakub Pawlak

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712107015

• Abstract
• PDF (123 KB)
• References

Mechatronics and Robotics

Open Access

Linear pneumatic actuator 08001

Mihai Avram, Constantin Niţu, Constantin Bucşan and Bogdan Grămescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712108001

• Abstract
• PDF (498 KB)
• References

Open Access

Specialised sensorial block 08002

Mihai Avram, Constantin Bucsan and Tudor Cătălin Apostolescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712108002

• Abstract
• PDF (650 KB)
• References

Open Access

Considerations regarding the use of technological equipment for indexed and continuous multi-axes machining 08003

Radu-Eugen Breaz and Melania Tera

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712108003

• Abstract
• PDF (2.01 MB)
• References

Open Access

Colour based sorting station with Matlab simulation 08004

Victor Constantin, Rizescu Dana and Ciprian Rizescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712108004

• Abstract
• PDF (2.10 MB)
• References

Open Access

Assistive humanoid robot MARKO: development of the neck mechanism 08005

Marko Penčić, Maja Čavić, Srđan Savić, Milan Rackov, Branislav Borovac and Zhenli Lu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712108005

• Abstract
• PDF (1.55 MB)
• References

Open Access

Using brain-computer-interface for robot arm control 08006

Sebastian-Daniel Rosca and Monica Leba

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712108006

• Abstract
• PDF (2.25 MB)
• References

Open Access

Method for analysing the deformation and stress of vertebra assembly 08007

Alina Rodica Spanu and Daniel Besnea

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712108007

• Abstract
• PDF (2.40 MB)
• References

Open Access

Adaptive robotic end-effector with embedded 3D-printed sensing Circuits 08008

Aurelian Zapciu, George Constantin and Diana Popescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712108008

• Abstract
• PDF (2.58 MB)
• References

Engineering in Oil and Gas Field

Open Access

Energy management strategies in the oil industry for chemical and thermal environment pollution reduction 09001

Lazăr Avram, Tudora Cristescu and Monica Emanuela Stoica

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712109001

• Abstract
• PDF (364 KB)
• References

Open Access

Research on the internal pressure behavior of metal gas distribution pipelines with different types of tubing defects 09002

Stefan Mihai Filip and Eugen Avrigean

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712109002

• Abstract
• PDF (3.97 MB)
• References

Open Access

Considerations on sand control in natural gas wells 09003

Ion Foidaş and Dan-Paul Ştefănescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712109003

• Abstract
• PDF (778 KB)
• References

Open Access

Studies regarding the use of a neuro-fuzzy mathematical model in order to determine the technological parameters of the polyethylene pipes butt welding process 09004

Alina Gligor, Marcel-Letitiu Balan, Letitia-Corina Balan and Horatiu-Daniel Crisan

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712109004

• Abstract
• PDF (2.39 MB)
• References

Open Access

Computer-aided study of the gas flow within a natural gas storage and the associated collection network 09005

Alina Gligor, Cristian Deac and Marius Bibu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712109005

• Abstract
• PDF (2.40 MB)
• References

Open Access

Solutions to operate transmission and distribution gas networks 09006

Sorin Neacsu and Cristian Eparu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712109006

• Abstract
• PDF (1.20 MB)
• References

Open Access

Intergranular degradation of stainless steel tubular components used for kerosene transportation. Metallographic analysis 09007

Ion Palamarciuc, Dan Gelu Galusca, Monica Ratoi, Brian Mellor, Cătălin Gabriel Dumitraş and Maricel Agop

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712109007

• Abstract
• PDF (3.94 MB)
• References

Open Access

Brownfield management opportunities to reduce the back pressure effects on the gas wells 09008

Dan-Paul Stefanescu and Diana-Andreea Lupu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712109008

• Abstract
• PDF (966 KB)
• References

Open Access

Underbalance well completion - a modern approach for mature gas fields 09009

Argentina Tătaru and Nicolae Bogdan Simescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712109009

• Abstract
• PDF (1.26 MB)
• References

Open Access

Hazardous gas areas on high-pressure gas pipelines in poland 09010

Łukasz Zabrzeski, Łukasz Drążkiewicz, Krystian Liszka, Mariusz Łaciak and Piotr Paszylk

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712109010

• Abstract
• PDF (580 KB)
• References

Environmental Engineering

Open Access

Research experiences on the reuse of industrial waste for concrete production 10001

Alessandro Abbà, Sabrina Sorlini and Maria Cristina Collivignarelli

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712110001

• Abstract
• PDF (240 KB)
• References

Open Access

Analysis of the road traffic-induced pollution in two areas of Sibiu, Romania 10002

Cristian Deac and Marius Bibu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712110002

• Abstract
• PDF (2.35 MB)
• References

Open Access

Is agro-tourism eco-friendly? 10003

Ramona Giurea, Marco Ragazzi, Moise Ioan Achim and Mihai-Victor Zerbes

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712110003

• Abstract
• PDF (164 KB)
• References

Open Access

3D modeling of olive tree and simulating the harvesting forces 10004

Dan Ovidiu Glăvan, Theoharis Babanatsas and Roxana Mihaela Babanatis Merce

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712110004

• Abstract
• PDF (1.61 MB)
• References

Open Access

Reducing the environmental impact of a gas operated cogeneration installation 10005

Sabin Ioan Irimie, Sorin Mihai Radu, Dan Codruț Petrilean and Andrei Andras

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712110005

• Abstract
• PDF (379 KB)
• References

Open Access

Environmental assessment of the Sibiu County, Romania: proposal for sewage sludge and OFMSW management 10006

Gloria Trombin, Marco Ragazzi, Claudiu Isarie, Rodica Ciudin and Vincenzo Torretta

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712110006

• Abstract
• PDF (209 KB)
• References

Open Access

Illumination of a production facility for communication and electric power cables 10007

Cristian Tsakiris, Cristin Bigan and Valentin Panduru

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712110007

• Abstract
• PDF (199 KB)
• References

Safety and Health at Work

Open Access

Contributions to risk assessment in the departments of welding mechanical engineering companies 11001

Gheorghe Amza, Dan Florin Nitoi, Valentin Dan Petrescu, Zoia Apostolescu and Oana Roxana Chivu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111001

• Abstract
• PDF (285 KB)
• References

Open Access

Contributions to risk injury evaluation of human skin contact caused by welding technology in mechanical engineering a company 11002

Gheorghe Amza, Dan Florin Niţoi, Valentin Dan Petrescu, Oana Roxana Chivu and Zoia Apostolescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111002

• Abstract
• PDF (145 KB)
• References

Open Access

Modern principles used in conformity assessment of machinery from forestry sector 11003

Anca Elena Antonov, Georgeta Buica and Constantin Beiu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111003

• Abstract
• PDF (141 KB)
• References

Open Access

Quantitative and qualitative differences worth considering in approaching critical infrastructures resilience 11004

Dorel Badea, Ghiță Bârsan, Ioan Virca and Dumitru Iancu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111004

• Abstract
• PDF (120 KB)
• References

Open Access

Means to improve underground coal mine safety by automated control of methane drainage systems 11005

Gabriel Bujor Babut, Roland Iosif Moraru and Popescu-Stelea Mihai

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111005

• Abstract
• PDF (106 KB)
• References

Open Access

The impact of occupational risks in the operating and maintenance activities in the energy sector 11006

Georgiana Buica, Anca Elena Antonov, Constantin Beiu, Dragos Pasculescu and Dobra Remus

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111006

• Abstract
• PDF (771 KB)
• References

Open Access

Key elements on implementing an occupational health and safety management system using ISO 45001 standard 11007

Doru Costin Darabont, Anca Elena Antonov and Costică Bejinariu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111007

• Abstract
• PDF (108 KB)
• References

Open Access

The ergonomics interventions evaluation. A study based on usability 11008

Anca Draghici, Larisa Ivascu, Alin Gaureanu and Anca Mocan

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111008

• Abstract
• PDF (541 KB)
• References

Open Access

Safety-at-work competences as a driver of corporate social responsibility 11009

Adam Górny

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111009

• Abstract
• PDF (146 KB)
• References

Open Access

Assessment of the compliance of osh competences with student expectations in the post-graduate programs offered by the poznań university of technology 11010

Adam Górny and Małgorzata Rembiasz

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111010

• Abstract
• PDF (119 KB)
• References

Open Access

Prospective analysis of ambiental and weather effects on conform displaying of fireworks 11011

Ciprian Jitea, Attila Kovacs, Gabriel Vasilescu, Edward Gheorghiosu, Daniela Rus and Sorin Bordoş

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111011

• Abstract
• PDF (1.16 MB)
• References

Open Access

Study on cognitive behavioural coping of intervention and rescue personnel in toxic / flammable / explosive environments 11012

Izabella Kovacs, Artur George Găman, Cosmin Ilie, Alin Irimia and Andrei Gireadă

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111012

• Abstract
• PDF (107 KB)
• References

Open Access

The application of event tree analysis in a work accident at maintenance operations 11013

Radu Mareş and Mihai Popescu Stelea

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111013

• Abstract
• PDF (103 KB)
• References

Open Access

Workforce active ageing case study in a Romanian manufacturing company 11014

Roland Iosif Moraru, Lucian-Ionel Cioca and Gabriel Bujor Babut

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111014

• Abstract
• PDF (235 KB)
• References

Open Access

Advances in impact resistance testing for explosion-proof electrical equipment 11015

Vlad Mihai Pasculescu, Nicolae Ioan Vlasin, Gheorghe Daniel Florea, Marius Cornel Suvar and Cosmin Ioan Colda

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111015

• Abstract
• PDF (3.30 MB)
• References

Open Access

Aspects regarding explosion risk assessment 11016

Mihaela Părăian, Sorin Burian, Mihai Magyari and Lucian Moldovan

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111016

• Abstract
• PDF (959 KB)
• References

Open Access

Seasonal monitoring of microbiological air contamination from a museum - a case study 11017

Iuliana Pamela Scarlat, Veronica Lazăr, Raluca Stepa, Mariana Carmen Chifiriuc, Lia-Mara Dițu and Maria Haiducu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111017

• Abstract
• PDF (288 KB)
• References

Open Access

Liquid hydrocarbons from coal beds – risk factor for the underground work environment - Case study 11018

Cristian Tomescu, Constantin Lupu, Maria Prodan, Ion Gherghe and Florin Radoi

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712111018

• Abstract
• PDF (169 KB)
• References

Academic Education and Management

Open Access

Replicating enterprise environment using Office 365 to enhance graduates’ employability 12001

Nicoleta Luminita Carutasu and George Carutasu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112001

• Abstract
• PDF (208 KB)
• References

Open Access

Hopes and fears of teacher candidates concerning the teaching profession 12002

Daniela Creţu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112002

• Abstract
• PDF (107 KB)
• References

Open Access

Some considerations on adapting academic qualifications to the Romanian labor market 12003

Calin Denes and Valentin Grecu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112003

• Abstract
• PDF (439 KB)
• References

Open Access

Reflective practice – an objective of the career counselling and orientation process 12004

Cristian Doicin, Sorina Chircu and Mihaela Ulmeanu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112004

• Abstract
• PDF (149 KB)
• References

Open Access

How important is mentoring in education? 12005

Carmen Sonia Duse, Dan Maniu Duse and Maria Karkowska

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112005

• Abstract
• PDF (85.2 KB)
• References

Open Access

The importance of OER in engineering education 12006

Carmen Sonia Duse, Dan Maniu Duse and Philip Bonnano

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112006

• Abstract
• PDF (80.3 KB)
• References

Open Access

Benefits of entrepreneurship education and training for engineering students 12007

Valentin Grecu and Calin Denes

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112007

• Abstract
• PDF (220 KB)
• References

Open Access

Teaching issues of contemporary history using historical sources and modern teaching methods 12008

Gabriela Gruber

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112008

• Abstract
• PDF (92.0 KB)
• References

Open Access

The interaction of Universities with high-tech enterprises: commercialization of innovations 12009

Irina Kalinina and Karina Chernitsova

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112009

• Abstract
• PDF (219 KB)
• References

Open Access

Models of e-testing 12010

Sara Konnerth and Gunter Lobin

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112010

• Abstract
• PDF (708 KB)
• References

Open Access

The benefits of inclusive education: new challenges for university teachers 12011

Alina Georgeta Mag, Sandra Sinfield and Tom Burns

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112011

• Abstract
• PDF (85.6 KB)
• References

Open Access

The function of mirror neurons in the learning process 12012

Daniel Mara

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112012

• Abstract
• PDF (88.6 KB)
• References

Open Access

New perspective of learner-centered education in nowadays didactics 12013

Elena Lucia Mara

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112013

• Abstract
• PDF (99.6 KB)
• References

Open Access

University and non-formal education 12014

Liliana Georgeta Popescu

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112014

• Abstract
• PDF (184 KB)
• References

Open Access

Student entrepreneurship – research on development 12015

Małgorzata Rembiasz

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112015

• Abstract
• PDF (122 KB)
• References

Open Access

Improvement of learning quality in manufacturing technology: a case study 12016

Ionela Magdalena Rotaru

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112016

• Abstract
• PDF (894 KB)
• References

Open Access

Knowledge and usage of methods of online promotion by students as potential entrepreneurs 12017

Paulina Siemieniak and Jakub Pawlak

Published online: 09 August 2017

DOI: https://doi.org/10.1051/matecconf/201712112017

• Abstract
• PDF (88.4 KB)
• References