Issue |
MATEC Web Conf.
Volume 121, 2017
8th International Conference on Manufacturing Science and Education – MSE 2017 “Trends in New Industrial Revolution”
|
|
---|---|---|
Article Number | 01010 | |
Number of page(s) | 8 | |
Section | Design, Manufacturing and Management of Technological Equipment and Systems | |
DOI | https://doi.org/10.1051/matecconf/201712101010 | |
Published online | 09 August 2017 |
About the best value of rake angle for cutting tools
Politehnica University Timişoara, Mechanical Faculty, Materials and Manufacturing Engineering Department, 300222 Mihai Viteazu Av., Timişoara
* Corresponding author: eugen.pamintas@upt.ro
Regardless of whether the case of processing through methods of cutting metal, wood, plastics, stone, composite materials etc., the rake angle (γ) is of major importance for energy efficiency and dynamic behaviour of cutting process, dimensional accuracy, work surface quality and pieces made cost. The paper examines the possibility of establishing the best value for the rake angle supposing two idealizations: one regarding the conditions in which cutting process takes place, and the second related to the simplifications aiming to facilitate a first stage of theoretical development of mathematical description for the chip forming process. Both idealizations are intended to individualize the influence that has the value of rake angle of the cutting tools on the process of chip forming in order to perceive the meaning of the link between the geometry of the cutting tool with other parameters of chips and by default with the work parameters set to machine-tool. While both validity and applicability of the mathematical relations obtained are negatively marked by the simplifying assumption which was appealed in achieving the approach, the highlighted findings may be good starting points for further research on the kinematics cutting depth and in the structure of the material being processed.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.