Issue |
MATEC Web Conf.
Volume 121, 2017
8th International Conference on Manufacturing Science and Education – MSE 2017 “Trends in New Industrial Revolution”
|
|
---|---|---|
Article Number | 05005 | |
Number of page(s) | 7 | |
Section | Quality Engineering and Management | |
DOI | https://doi.org/10.1051/matecconf/201712105005 | |
Published online | 09 August 2017 |
Experimental research regarding the study of surface quality of aluminum alloys processed through milling
1 SC TechnoCAD SA, Vasile Alecsandri no. 72, code 430351, Baia Mare, România
2 Lucian Blaga University of Sibiu, Victoriei Street no. 10, code 550024, Sibiu, România
* Corresponding author: mihail.titu@ulbsibiu.ro
The aim of this paper is to present the necessary steps to conduct a design of experiment with application on the aluminum alloy surface quality obtained by end-milling process. The machined surface quality is influenced by the cutting process parameters, and especially by their variation. The research methods used in this paper are the Taguchi method - to determine the cutting parameters influence, on the surface quality, and the full factorial design of experiment to confirm the results obtained by Taguchi’s method and to determine the percentage of the parameters influence involved in the process.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.