| Issue |
MATEC Web Conf.
Volume 121, 2017
8th International Conference on Manufacturing Science and Education – MSE 2017 “Trends in New Industrial Revolution”
|
|
|---|---|---|
| Article Number | 10001 | |
| Number of page(s) | 8 | |
| Section | Environmental Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201712110001 | |
| Published online | 09 August 2017 | |
Research experiences on the reuse of industrial waste for concrete production
1 University of Pavia, Department of Civil and Architectural Engineering, via Ferrata 1, 27100 Pavia, Italy
2 University of Brescia, Department of Civil, Environmental, Architectural Engineering and Mathematics, via Branze 43, 25123 Brescia, Italy
* Corresponding author: abba78@unipv.it
The aim of this study was to assess the feasibility of concrete production using different kinds of industrial wastes as “recycled aggregate”. The wastes studied in this work were: fly ashes and slags from Electric Arc Furnace (EAF) steel plant; foundry sands produced from foundry dies; slags from lead processing; Waelz slags; solid residues from municipal solid waste incineration (MSWI) plant (with mass-burning kiln and fluidized bed reactor); sludge from industrial wastewater treatment plants. Good compressive strength (similar to natural concrete) was achieved after 28 days of curing by concrete mixtures obtained with the partial replacement (from 7% to 40% by weight) of natural aggregates with slags from lead processing, foundry sands, Waelz slags and bottom ashes from MSW incineration. The worst mechanical and leaching behaviours were shown by concrete samples containing EAF fly ashes and sludge from industrial wastewater treatment. For the residues with the best performance, concrete products (kerbs and flat tiles) were casted. Their mechanical and leaching characterization has shown that the reuse of these residues for concrete product is feasible.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.