MATEC Web Conf.
Volume 121, 20178th International Conference on Manufacturing Science and Education – MSE 2017 “Trends in New Industrial Revolution”
|Number of page(s)||7|
|Section||Advanced Manufacturing Technologies|
|Published online||09 August 2017|
Measuring unbalance-induced vibrations in rotating tools
Institute for Machine Tools, University of Stuttgart, 70174 Stuttgart, Germany
* Corresponding author: email@example.com
Unbalances in a tool cause vibrations of the spindle and the machine itself and lead to a waviness of the machined workpiece surface. This paper presents an experimental and analytical procedure for optically measuring the unbalance-induced displacements of the tool centre point (TCP). Therefore, a new method is introduced to determine the dynamic vibrations of a tool by comparing the geometrical profile of the tool with the dynamical profile at a high rotational speed. The necessary steps for measuring the signals and calculating the underlying dynamic vibrations of the tool are presented here. Afterwards, the unbalance-induced vibrations of a milling tool are shown as well as their influence on the eccentricity of the rotation axis. With this newly introduced method it is possible to directly link the displacements of the tool under rotation to the waviness of the workpiece surface and the dynamic stiffness of machine tools.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.