MATEC Web Conf.
Volume 121, 20178th International Conference on Manufacturing Science and Education – MSE 2017 “Trends in New Industrial Revolution”
|Number of page(s)||7|
|Section||Management, Modelling and Monitoring of Manufacturing Processes|
|Published online||09 August 2017|
Preliminary study on occurrence of composite material delamination processed by abrasive water jet cutting
Technical University of Cluj-Napoca, B-dul. Muncii, No. 103-105, Cluj-Napoca, Romania
* Corresponding author: email@example.com
The paper presents a preliminary experimental study on processing composite materials (CFRP) using abrasive water jet cutting (AWJC) process, analysing the possibilities of occurrence of material delamination. AWJC is a proper solution for cutting CFRP because of reduced interface temperature, high flexibility, low mechanical loading and reduced cutting forces. Cutting CFRP using AWJC involves several challenges like material delamination due to the high velocity impact of the jet. To understand the delamination, three experimental tests were made: in the first test the cutting and the drilling was made with high water pressure (350 MPa), in the second test the cutting was made with high water pressure and for drilling was used low water pressure (200 MPa) and in last test a pre-drilled hole was used. Within those experiments was observed the CFRP delamination appears just during the drilling, not during the cutting. By decreasing the water jet pressure, the jet energy is decreased and in this way the delamination decrease.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.