MATEC Web Conf.
Volume 94, 2017The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 – CoSME’16
|Number of page(s)||9|
|Section||Solutions for Tools and Devices in Manufacturing Engineering|
|Published online||04 January 2017|
The tool profile and the localization of the revolution axis for irregular outline milling
Politehnica University of Timişoara, Materials and Manufacturing Engineering Department, 300222, Timişoara, Romania
* Corresponding author: email@example.com
For the most cases of manufacturing cutting processes in today’s flexible manufacturing systems, the cutting tools which are needed are almost standard. The problem of choosing the appropriate tool shape and dimension is often made by the tool management system according with the shape of mechanical part which must be manufactured. But, the accuracy of profiled surfaces, such as the helical channel of tools depends essentially on three aspects. The first one is the correct determination of geometric profile. The second is the correct execution of that profile. Finally, the third issue is related the positioning of the tool relative to the axis of the blank. The accurate determination of the active profile of the profiled disk milling is an essential constraint, but not the only one to obtain the irregular outline shapes by milling. The settings up parameters are those which supply the closeness of the part spiral shape. The paper presents an iterative analytical calculation procedure for the points from the profiled shape of the disk type of milling cutter. Also, the paper shows a set of analytical expressions for the calculus of the disk type of milling cutter localization parameters, under the condition of rigidity and strength requirement insurance.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.