| Issue |
MATEC Web Conf.
Volume 94, 2017
The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 – CoSME’16
|
|
|---|---|---|
| Article Number | 07005 | |
| Number of page(s) | 7 | |
| Section | Other Related Topics | |
| DOI | https://doi.org/10.1051/matecconf/20179407005 | |
| Published online | 04 January 2017 | |
Full factorial DOE to determine the influence of the process parameters in cleaning water jets used in sewer cleaning
Technical University of Cluj Napoca, North University Center Baia Mare, 62A, Dr. Victor Babes Street, 430083 Baia Mare, Romania
* Corresponding author: Nicolae.Medan@cunbm.utcluj.ro
Industrial cleaning is a classic application of water jets technology. In the late 1950s, when reliable high pressure pumps were built, the usage of water jets spread widely in the field of pipes and sewerage cleaning. In our particular case, water jets using pressure between 100 and 200 bars are being used. The operational behaviour of these systems is dependent on the process parameters, which can vary, causing variations in the impact force. The experiment consists in the research method used in the study of the impact forces that occur in the sewerage cleaning head system. To determine the influence process parameters have on impact forces, the full factorial method was used. In order to measure the impact forces between the water jet and a flat and rigid surface, a stand was designed and built for generating pressure water jets, as well as a device to measure the impact forces.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.