Open Access
| Issue |
MATEC Web Conf.
Volume 94, 2017
The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 – CoSME’16
|
|
|---|---|---|
| Article Number | 03011 | |
| Number of page(s) | 15 | |
| Section | Additive Manufacturing and Non-conventional Technologies | |
| DOI | https://doi.org/10.1051/matecconf/20179403011 | |
| Published online | 04 January 2017 | |
- M. Nikolova, P. Danev, I. Dermendzhiev, J Mat Sci Tech (Bulgaria), 21 2, 84–96 (2013) [Google Scholar]
- K. Shetty, S. Kumar, P. R. Rao, Surf Coat Tech 203 10, 1530–1536 (2009) [CrossRef] [Google Scholar]
- J. Wang, J. Xiong, Q. Peng, H. Fan, Y. Wang, G. Li, B. Shen, Mater Charact 60, 197–203 (2009) [CrossRef] [Google Scholar]
- M. Teimouri, M. Ahmadi, N. Pirayesh, M. Khoee, H. Khorsand, S. Mirzamohammadi, J Alloys Compd, 477 1-2, 591–595 (2009) [CrossRef] [Google Scholar]
- M. HeydarzadehSohi, M. Ebrahimi, A. HonarbakhshRaouf, F. Mahboubi, Surf Coat Tech 205, 84–89 (2010) [CrossRef] [Google Scholar]
- M. Tercelj, A. Smolej, P. Fajfar, R. Turk, Tribol Intl 40, 374–384 (2007) [CrossRef] [Google Scholar]
- P. C. King, R. W. Reynoldson, A. Brownrigg, J. M. Long, Surf Eng 21 2, 86–98 (2005) [CrossRef] [Google Scholar]
- T. Bell, Heat Treat. Met., 2 2,39–49 (1975) [Google Scholar]
- S.-H. Chang, K.-Ts. Huang, Y.-Hs. Wang, Mater Trans, 53 4, 745–751 (2012) [CrossRef] [Google Scholar]
- A. Khadar Syed, J. Hardell, B. Prakash, Estonian J. of Eng 16 2, 123–134 (2010) [CrossRef] [Google Scholar]
- K. H. Lee, K. S. Nam, P. W. Shin, D.Y. Lee, Yo-S. Song, Mater Lett. 57, 2060–2065 (2003) [CrossRef] [Google Scholar]
- G.H. Farrahi, H. Ghadbeigi, J Mater. Process. Technol. 174, 318–324 (2006) [CrossRef] [Google Scholar]
- F. Ashrafizadeh, Surf Coat Tech 174–175, 1196–1200 (2003) [Google Scholar]
- M. Rosso, A. Bennani, Trans on Eng Sci 17, 25–134 (1997) [Google Scholar]
- D. Nikolov, M. Nikolova, Scientific Technical J Mater Sci. Non-equilibrium phase transformations 3, 29–33, (2015) [Google Scholar]
- E.J. Mittemeijer, ASM Handbook, Vol. 4A, Steel Heat Treating Fundamentals and Processes, J. Dossett and G.E. Totten (editors), 619–646 (2013) [Google Scholar]
- P. Danev, Proc. of Scientific Session, RU&SU’2004, Eng. Sci. (in Bulgarian) 41 2, 73–77 (2004) [Google Scholar]
- C.W. Bale, E. Bélisle, P. Chartrand, S.A. Decterov, G. Eriksson, A.E. Gheribi, K. Hack, I.-H. Jung, Y.-B. Kang, J. Melançon, A.D. Pelton, S. Petersen, C. Robelin, J. Sangster, P. Spencer, M-A. Van Ende, FactSage thermochemical software and databases, 2010–2016 Calphad, 54, 35–53 (2016) [Google Scholar]
- O. Salas, J. Oseguera, N. Garci, U. Figueroe, J. Mat Eng & Perf, 10 6, 649–655 (2001) [CrossRef] [Google Scholar]
- S. S. Hosmani, Metal Mater. Eng. 19 1, 65–84 (2013) [Google Scholar]
- S.M. Hassani-Gangaraj, M. Guagliano, Appl. Surf. Sci 271, 56–163(2013) [CrossRef] [Google Scholar]
- P.C King, R. W. Reynoldson, A. Brownrigg, J. M. Long, Surf Eng 21 2, 86–96 (2005) [CrossRef] [Google Scholar]
- Mei Yang, Dissertation, Worcester Polytechnic Institute, 1-139 (2012) [Google Scholar]
- M.A.J. Somers, International Heat Treatment and Surface Engineering IFHTSE Global 21, 5 1, 7–16 (2011) [CrossRef] [Google Scholar]
- M.A.J. Somers, E.J. Mittemeijer, Heat Treating, Proc. 17th ASM Heat Treating Society Conference, ASM International, 321–330 (1998) [Google Scholar]
- R. H. Jutte, B.J. Kooi, M. A. J. Somers, E.J. Mittemeijer, Oxid. Met 48 1/2, 87–109 (1997). [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.