Issue |
MATEC Web Conf.
Volume 94, 2017
The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 – CoSME’16
|
|
---|---|---|
Article Number | 07004 | |
Number of page(s) | 10 | |
Section | Other Related Topics | |
DOI | https://doi.org/10.1051/matecconf/20179407004 | |
Published online | 04 January 2017 |
Parametric programming of CNC machine tools
Czestochowa University of Technology, Institute for Mechanical Technologies, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
* Corresponding author: rafal@itm.pcz.pl
The article presents the possibilities of parametric programming of CNC machine tools for the SINUMERIK 840D sl control system. The kinds and types of the definition of variables for the control system under discussion described. On the example of the longitudinal cutting cycle, parametric programming possibilities are shown. The program’s code and its implementation in the control system is described in detail. The principle of parametric programming in a high-level language is also explained.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.