Volume 252 (2019)

Free Access to the whole issue

MATEC Web of Conferences

Volume 252 (2019)

III International Conference of Computational Methods in Engineering Science (CMES’18)

Kazimierz Dolny, Poland, November 22-24, 2018
M. Kulisz, M. Szala, M. Badurowicz, W. Cel, M. Chmielewska, Z. Czyż, K. Falkowicz, J. Kujawska and T. Tulwin (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 14 January 2019

PDF (43.7 KB)

Open Access

About the conference

Published online: 14 January 2019

PDF (347 KB)

Analysis of Engineering Processes

Open Access

Electrochemical ECG grinding of ceramic and tungsten sinter 01001

Krzysztof Przystupa

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925201001

Open Access

Computerised grinding procedure for large scale crankshaft machining 01002

Zbigniew Siemiątkowski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925201002

Open Access

Numerical Analysis of a Fuel Pump for an Aircraft Diesel Engine 01003

Rafał Sochaczewski and Marcin Szlachetka

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925201003

Open Access

Selected aspects of electricity generation in a private photovoltaic installation 01004

Krzysztof Przystupa

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925201004

Open Access

SysML-based Optimisation of Global Variables Arrangement for Visualisation in Distributed Control Systems Oriented Towards Communication Performance 01005

Marcin Jamro and Dariusz Rzonca

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925201005

Open Access

Impact of Selected Structural, Material and Exploitation Factors on Adhesive Joints Strength 01006

Anna Rudawska, Marek Maziarz and Izabela Miturska

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925201006

Open Access

Assessment of the impact of vibrations on the track surface from impact loads 01007

Michał Jukowski, Krzysztof Śledziewski and Mateusz Hypki

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925201007

Open Access

Cyclic heat release variability in a spark ignition engine under exhaust gas recirculation 01008

Asok K. Sen, Grzegorz Litak and Robert M. Wagner

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925201008

Open Access

Mechanical system detector of weight in motion system 01009

Aleksander Nieoczym, Kazimierz Drozd and Andrzej Wójcik

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925201009

Application of Computer Programs in Technology

Open Access

Routing of branched water distribution networks using fractal geometry and graph theory 02001

Paweł Suchorab and Dariusz Kowalski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925202001

Open Access

Computer approximation of air gauge dynamic characteristics using the sine input test rig 02002

Michał Jakubowicz, Mirosław Rucki and Zbigniew Siemiątkowski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925202002

Open Access

Architecture of on-line data acquisition system for car on-board diagnostics 02003

Bartosz Kowalik and Marcin Szpyrka

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925202003

Open Access

Indoor vehicle tracking with a smart MEMS sensor 02004

Radosław Cechowicz and Marcin Bogucki

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925202004

Open Access

Control algorithm for holonomic robot that balances on single spherical wheel 02005

Daniel Wyrwał and Tymoteusz Lindner

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925202005

Open Access

The influence of the Lorenz system fractionality on its recurrensivity 02006

Magdalena Gregorczyk and Andrzej Rysak

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925202006

Open Access

Towards UML representation for BPMN and DMN models 02007

Anna Suchenia, Paweł Łopata, Piotr Wiśniewski and Bernadetta Stachura-Terlecka

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925202007

Open Access

Application of Computer System in Control and Programming of a Robotized Soldering Station 02008

Andrzej Milecki, Roman Regulski, Dariusz Sędziak, Piotr Owczarek and Zbigniew Proch

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925202008

Open Access

Construction and Control of the Bipedal Walking Robot 02009

Patryk Nowak, Andrzej Milecki and Marcin Białek

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925202009

Open Access

The study of human behaviour in a laboratory set-up with the use of innovative technology 02010

Tomasz Szymczyk and Stanisław Skulimowski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925202010

Open Access

Towards knowledge interoperability between the UML, DMN, BPMN and CMMN models 02011

Anna Suchenia, Krzysztof Kluza, Piotr Wiśniewski, Krystian Jobczyk and Antoni Ligęza

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925202011

Open Access

Continuous glucose monitoring: review of promising technologies 02012

Monika Klimek and Tytus Tulwin

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925202012

Computational Artificial Intelligence

Open Access

Problems of acquisition and postprocessing of 3D scans of large architectural objects 03001

Jacek Kęsik, Marek Miłosz and Jerzy Montusiewicz

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203001

Open Access

Customer data collection with Internet of Things 03002

Agnieszka Bojanowska

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203002

Open Access

Collective decision making in dynamic vehicle routing problem 03003

Edyta Kucharska, Katarzyna Grobler-Dębska and Radosław Klimek

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203003

Open Access

Estimation of critical force of the buckling composite structures using modelling methods 03004

Karol Szklarek, Jakub Gajewski and David Valis

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203004

Open Access

System for automatic generation of logical formulas 03005

Radosław Klimek, Katarzyna Grobler-Dębska and Edyta Kucharska

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203005

Open Access

Neural machine translation system for the Kazakh language based on synthetic corpora 03006

Ualsher Tukeyev, Aidana Karibayeva and Balzhan Abduali

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203006

Open Access

A* pathfinding algorithm modification for a 3D engine 03007

Jakub Smołka, Kamil Miszta, Maria Skublewska-Paszkowska and Edyta Łukasik

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203007

Open Access

Implementation of artificial intelligence in optimisation of technological processes 03008

Jerzy Lipski and Kazimierz Zaleski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203008

Open Access

A concept of the air quality monitoring system in the city of Lublin with machine learning methods to detect data outliers 03009

Tomasz Cieplak, Tomasz Rymarczyk and Robert Tomaszewski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203009

Open Access

Comparative analysis of two-group supervised classification algorithms in the study of P300-based brain-computer interface 03010

Małgorzata Plechawska-Wójcik, Monika Kaczorowska and Bernadetta Michalik

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203010

Open Access

Real-Time Road Quality Assessment Using Smartphones and Cloud Lambda Architecture 03011

Marcin Badurowicz and Tomasz Cieplak

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203011

Open Access

Impact of feature selection on system identification by means of NARX-SVM 03012

Michał Awtoniuk, Marcin Daniun, Kinga Sałat and Robert Sałat

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203012

Open Access

An interactive environment for digital registration of human behaviour for biofeedback purposes 03013

Tomasz Szymczyk and Katarzyna Baran

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203013

Open Access

Mobile system for road sign detection and recognition with template matching 03014

Michał Maćkowski, Michał Sawiski and Wojciech Walczyszyn

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203014

Open Access

Effect of technological parameters on vibration acceleration in milling and vibration prediction with artificial neural networks 03015

Ireneusz Zagórski and Monika Kulisz

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203015

Open Access

Jammers signal power modelling in the Wi-Fi band 03016

Dariusz Czerwinski, Slawomir Przylucki and Jaroslaw Nowak

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203016

Open Access

Application of neural network in determination of parameters for milling AZ91HP magnesium alloy with surface roughness constraint 03017

Monika Kulisz and Ireneusz Zagórski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203017

Open Access

Vibration identification of the roadheader cutting head using high-speed cameras 03018

Piotr Cheluszka and Rajmund Mann

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203018

Open Access

Comparative Overview of Rough Set Toolkit Systems for Data Analysis 03019

Piotr Pięta, Tomasz Szmuc and Krzysztof Kluza

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203019

Open Access

Susceptibility of surface texture parameters to acquisition point clouds with digital data processing of data from optical measuring systems 03020

Emilia Bachtiak-Radka, Sara Dudzińska, Daniel Grochała and Stefan Berczyński

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203020

Open Access

Affective computing with eye-tracking data in the study of the visual perception of architectural spaces 03021

Magdalena Chmielewska, Mariusz Dzieńkowski, Jacek Bogucki, Wojciech Kocki, Bartłomiej Kwiatkowski, Jarosław Pełka and Wioletta Tuszyńska-Bogucka

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925203021

Open Access

Erratum

Erratum to: Mobile system for road sign detection and recognition with template matching 03022

Michał Maćkowski, Michał Sawicki and Wojciech Walczyszyn

Published online: 12 March 2019

DOI: https://doi.org/10.1051/matecconf/201925203022

PDF (73.23 KB)

Computational Fluid Dynamics (CFD)

Open Access

The CFD Analysis of the Combustion Chamber in Common Rail Engines 04001

Karol Tucki, Anna Bączyk, Bartłomiej Rek and Izabela Wielewska

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925204001

Open Access

CFD Analysis of Charge Exchange in an Aircraft Opposed-Piston Diesel Engine 04002

Zbigniew Czyż, Ksenia Siadkowska and Rafał Sochaczewski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925204002

Open Access

Optimisation Studies of Cylinder Water Channel Geometry in an Internal Combustion Engine 04003

Michał Biały and Konrad Pietrykowski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925204003

Open Access

Effect of Cylindrical Turbulators on the Mixing Process in Basic Venturi Gas Mixer Using OpenFOAM 04004

Mathias Romańczyk and Witold Elsner

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925204004

Open Access

Design and Simulation of Small-Scale Horizontal-Axis Wind Turbine with Diffuser Effect 04005

Zbigniew Czyż, Paweł Karpiński, Tomasz Klepka and Zbigniew Szkoda

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925204005

Open Access

Low Reynolds Number Rotor Blade Aerodynamic Analysis 04006

Tytus Tulwin

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925204006

Open Access

Computational fluid dynamics simulation of thermal comfort in naturally ventilated room 04007

Andrzej Raczkowski, Zbigniew Suchorab and Przemysław Brzyski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925204007

Open Access

Computational analysis of solid particle-erosion produced by bottom ash slurry in 90° elbow 04008

Jashanpreet Singh, Jatinder Pal Singh, Mandeep Singh and Miroslaw Szala

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925204008

Computer Simulations of Processes Phenomena

Open Access

Optimisation of electric arc model parameters based on simplex annealing and genetic algorithms 05001

Tomasz Chmielewski, Tomasz Kuczek and Piotr Oramus

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205001

Open Access

Stochastic Elasto-Plastic Analysis of Necking Bar with Random Tvergaard Coefficients 05002

Michai Strąkowski and Marcin Kamiñski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205002

Open Access

Experimental and numerical investigation on the components of a pantograph slider suspension 05003

Paweł Zdziebko, Adam Martowicz and Tadeusz Uhl

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205003

Open Access

Influence of elongation factor on distributions of effective strain and flow stress for pushing through a conical die process of round bars made from S355 steel 05004

Tomasz Miłek

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205004

Open Access

Experimental verification of a numerical surface roughness model for metallic bodies under large plastic strain 05005

Paweł Sidun

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205005

Open Access

Computer simulation in identification and elimination of waste in the production process 05006

Agata Biniek and Agnieszka Terelak-Tymczyna

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205006

Open Access

Simulation Research of Aircraft Piston Engine Rotax 912 05007

Łukasz Grabowski, Ksenia Siadkowska and Krzysztof Skiba

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205007

Open Access

FEM simulation of water lost through damaged household water connection 05008

Małgorzata Iwanek, Paweł Suchorab and Zbigniew Suchorab

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205008

Open Access

Hysteresis modeling and investigations of a piezoelectric ring bender using Bouc-Wen model 05009

Roman Regulski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205009

Open Access

Sensitivity analysis of a municipal wastewater treatment plant model 05010

Paweł Król, Alberto Gallina, Michał Lubieniecki, Tadeusz Uhl and Tadeusz Żaba

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205010

Open Access

Electromagnetic simulation of low-pass birdcage coil 05011

Monika Mańko

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205011

Open Access

Energetic Analysis of the Aircraft Diesel Engine 05012

Łukasz Grabowski, Konrad Pietrykowski and Paweł Karpiński

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205012

Open Access

Modelling of sequencing batch reactor operating at various aeration modes 05013

Grzegorz Łagód, Adam Piotrowicz, Piotr Gleń, Jakub Drewnowski and Fabrizio Sabba

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205013

Open Access

Numerical modelling of water percolation through mortar-based connection of concrete pipes 05014

Marcin K. Widomski, Iwona Pawelec, Ajay Kumar and Grzegorz Łagód

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205014

Open Access

Two-dimensional heat transfer analysis of timber structure walls filled with hemp-lime composite 05015

Przemysław Brzyski, Sylwia Duda and Andrzej Raczkowski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205015

Open Access

Simulation of the medical syringe injection moulding process 05016

Sebastian Białasz and Tomasz Klepka

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205016

Open Access

Green designing of solar hot water systems using computer simulations 05017

Agnieszka Żelazna, Artur Pawłowski and Agata Zdyb

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205017

Open Access

The simulation study on the multipath adaptive video transmission 05018

Slawomir Przylucki and Dariusz Czerwinski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205018

Open Access

Numerical analysis of heat exchange process in the biomass carbonisation reactor 05019

Robert Zarzycki and Justyna Jędras

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205019

Open Access

Edge-area form removal of two-process surfaces with valley excluding method approach 05020

Przemysław Podulka

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205020

Open Access

The simulation model of the grapple loader operation 05021

Karol Tucki, Anna Bączyk, Remigiusz Mruk, Izabela Wielewska and Piotr Radziszewski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205021

Open Access

Performance analysis of mobile applications developed with different programming tools 05022

Jakub Smołka, Bartłomiej Matacz, Edyta Łukasik and Maria Skublewska-Paszkowska

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205022

Open Access

Reconstruction of road accident using video recording 05023

Sławomir Tarkowski, Aleksander Nieoczym, Jacek Caban, Leszek Gardyński and Jan Vrabel

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205023

Open Access

Analysis of the velocity distribution in the UVC module 05024

Sławomira Dumała, Mariusz Skwarczyński and Amelia Staszowska

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205024

Open Access

Application of sewage sludge for the production of construction 05025

Aneta Czechowska-Kosacka

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925205025

Exploitation Machine Building

Open Access

Control and data acquisition system for the rolling machine 06001

Andrzej Sumorek and Marcin Buczaj

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206001

Open Access

Analysis of a dimensional tolerances’ series of 2PW-SE gear pumps using multi valued logical trees 06002

Adam Deptuła, Piotr Osiński and Marian A. Partyka

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206002

Open Access

Concept and modelling of the electrohydraulic valve with DC and stepper motors 06003

Dominik Rybarczyk

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206003

Open Access

Controlling the industrial robot model with the hybrid BCI based on EOG and eye tracking 06004

Arkadiusz Kubacki and Arkadiusz Jakubowski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206004

Open Access

Gearbox damage identification using Ensemble Empirical Decomposition method 06005

Kamil Jonak and Arkadiusz Syta

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206005

Open Access

Data-driven monitoring of the gearbox using multifractal analysis and machine learning methods 06006

Andrzej Puchalski and Iwona Komorska

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206006

Open Access

Technical aspects of SAW gas sensors application in environmental measurements 06007

Łukasz Guz

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206007

Open Access

Control System for Aircraft Take-off and Landing Based on Modified PID controllers 06008

Tomasz Rogalski, Dariusz Nowak, Łukasz Wałek, Dariusz Rzońca and Sławomir Samolej

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206008

Open Access

Vehicle fuel consumption prediction based on the data record obtained from an engine control unit 06009

Branislav Sarkan, Stefania Semanova, Veronika Harantova, Ondrej Stopka, Maria Chovancova and Mirosław Szala

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206009

Open Access

SCFs study of tubular T/Y steel joints under inplane loading 06010

Lalitesh Kumar, Ajay Kumar, Danuta Barnat-Hunek, Elżbieta Szczygielska and Monika Garbacz

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206010

Open Access

Portfolio approach to project management in creation of the organization’s value 06011

Anna Kaczorowska, Jolanta Słoniec and Sabina Motyka

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206011

Open Access

The Use of QFD for the Design of a Maintenance Service Support System 06012

Ewelina Kosicka and Arkadiusz Gola

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206012

Open Access

Computer modelling of the effect of embodied energy on energetic effectiveness of biodiesel production 06013

Olga Orynycz and Andrzej Wasiak

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206013

Open Access

Technical and Organisational Changes in a Selected Production Process 06014

Anna Rudawska, Anna Flechsig and Izabela Miturska

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925206014

Finite Element Method (FEM)

Open Access

Natural plant stems modelling in a three-point bending test 07001

Bartosz Kawecki, Jerzy Podgórski and Aleksandra Głowacka

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925207001

Open Access

The modelling and strength analysis of the endoprosthesis of the knee joint 07002

Patrycja Kępa and Jakub Gajewski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925207002

Open Access

Strength Analysis of the CNG Direct Injector for the Combustion Ignition Engine in Real Driving Conditions 07003

Paweł Magryta, Michał Gęca and Michał Biały

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925207003

Open Access

FEM analysis of piston for aircraft two stroke diesel engine 07004

Paweł Magryta and Michał Gęca

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925207004

Open Access

Numerical analysis of energy absorption behaviour of circular profiles with plates under lateral loads 07005

Quirino Estrada, Dariusz Szwedowicz, Alejandro Rodriguez-Mendez, Jesús Silva-Aceves, Lara C. Wiebe, Javier S. Castro, Elifalet López, Luis F. Tinoco and Sebastián A. Castillo

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925207005

Open Access

The influence of the nucleus pulposus on the stress distribution in the natural and prosthetic intervertebral disc 07006

Robert Karpiński, Łukasz Jaworski, Józef Jonak and Przemysław Krakowski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925207006

Open Access

Stress distribution in the knee joint in relation to tibiofemoral angle using the finite element method 07007

Robert Karpiński, Łukasz Jaworski, Józef Jonak and Przemysław Krakowski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925207007

Open Access

Numerical investigation of the cope hole shape impact on fatigue life of welded joints in steel bridges 07008

Krzysztof Śledziewski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925207008

Open Access

Stiffening material impact on the work of thin-walled element 07009

Katarzyna Falkowicz

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925207009

Open Access

Numerical analysis of behaviour of compressed thin-walled Z-profiles weakened by holes 07010

Katarzyna Falkowicz

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925207010

Material Properties Structure Research Methods

Open Access

Numerical analysis of crack propagation in a pull-out test 08001

Jakub Gontarz and Jerzy Podgórski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925208001

Open Access

Structure and tribological properties of DLC:Si/AlCrN low friction thin film 08002

Agnieszka Paradecka, Krzysztof Lukaszkowicz and Mirosława Pawlyta

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925208002

Open Access

Analysis of loading history influence on fatigue and fracture surface parameters using the method of induction trees 08003

Adam Deptuła, Wojciech Macek and Marian A. Partyka

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925208003

Open Access

Modification of tribological tester t-01m allowing testing in conditions of lubrication 08004

Piotr Sadowski and Emil Czajka

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925208004

Open Access

The influence of the applied type of cooling after eight-stage hot compression test on the structure and mechanical properties of TRIPLEX type steels 08005

Liwia Sozańska-Jędrasik, Janusz Mazurkiewicz and Wojciech Borek

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925208005

Open Access

Numerical analysis of spinal stabiliser in spondylolisthesis treatment with pedicle screws 08006

Jarosław Zubrzycki

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925208006

Open Access

The analysis of influence of polymer admixtures on properties of lightweight concrete 08007

Jacek Góra, Danuta Barnat-Hunek, Paweł Wlaź and Monika Garbacz

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925208007

Probability, Statistics Quality Control

Open Access

Tomographic image correction with noise reduction algorithms 09001

Grzegorz Kłosowski, Tomasz Rymarczyk and Edward Kozłowski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925209001

Open Access

Studies of behaviour of the automatic control system of roadheader cutting heads movement 09002

Piotr Cheluszka, Piotr Sobota and Grzegorz Głuszek

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925209002

Open Access

Key role and potential of Industrial Internet of Things (IIoT) in modern production monitoring applications 09003

Jakub Pizoń, Grzegorz Kłosowski and Jerzy Lipski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925209003

Open Access

Computer measurement of ampacity of thin layers made on textile composite substrate 09004

Ewa Korzeniewska, Artur Szczęsny, Jerzy Józwik and and Arkadiusz Tofil

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925209004

Open Access

Computer measurement of the friction of thin metal structure created in PVD technology on the flexible substrate 09005

Ewa Korzeniewska, Artur Szczęsny, Jerzy Józwik and Arkadiusz Tofil

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925209005

Open Access

Innovation of the Polish Economy in comparison to European Union countries 09006

Dorota Miłek and Marta Mistachowicz

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925209006

Open Access

Multicriteria evaluation of the trajectory of a wheeled mobile robot – a case study 09007

Jerzy Montusiewicz and Stanisław Skulimowski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925209007

Open Access

Tuning parameters of the isochronous endpoint of a USB peripheral device in a multimedia system 09008

Michał Sawicki, Michał Maćkowski and Andrzej Kwiecień

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925209008

Open Access

Statistical analysis of the water pollution indicators pertaining to treated municipal sewage introduced to the river 09009

Dariusz Majerek, Sylwia Duda, Roman Babko and Marcin K. Widomski

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925209009

Open Access

Statistical methods in the context of environmental quality assessment: On the example of riparian beetles (Coleoptera, Carabidae) 09010

Marina Kirichenko-Babko, Yaroslav Danko, Łukasz Guz, Dariusz Majerek and Roman Babko

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925209010

Open Access

Potential ecological risk assessment and prediction of heavy-metal pollution of soil surrounding the drilling waste deposition site 09011

Justyna Kujawska and Wojciech Cel

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925209011