MATEC Web of Conferences

Open Access

Numerical investigation of boiling and forced convection heat transfer in inclined porous enclosure using modified enthalpy formulation 01001

Omar Rafae Alomar, Rafie Rushdy Mohammed and Karam Hashim Mohammed

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001001

• Abstract
• PDF (1.330 MB)
• References

Open Access

Influence of forced convection on the evaporation and internal dynamics inside of an array of salt solution droplets 01002

Omar Al-Rawi and Mark Wilson

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001002

• Abstract
• PDF (1.161 MB)
• References

Open Access

Numerical investigation for convective heat transfer and friction factor under pulsating flow conditions 01003

Erman Aslan, Mert Ozsaban, Guven Ozcelik and Hasan Riza Guven

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001003

• Abstract
• PDF (816.3 KB)
• References

Open Access

Study of a hydraulic system converting energy from sea waves near the coast 01004

Silvio Barbarelli, Mario Amelio, Gaetano Florio and Nino Michele Scornaienchi

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001004

• Abstract
• PDF (1.283 MB)
• References

Open Access

Heat transfer and flow field in a circular twisted channel 01005

Suvanjan Bhattacharyya, Himadri Chattopadhyay, Arnab Banerjee and Ali Cemal Benim

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001005

• Abstract
• PDF (1004 KB)
• References

Open Access

Natural convection melting of nano-enhanced phase change material in a cavity with finned copper profile 01006

Nadezhda Bondareva and Mikhail Sheremet

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001006

• Abstract
• PDF (631.6 KB)
• References

Open Access

Determination of distribution of heat-conducting material concentration in protective layer of TPS panel 01007

Łukasz Brodzik and Andrzej Frąckowiak

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001007

• Abstract
• PDF (1.180 MB)
• References

Open Access

Numerical modeling of heat transfer in the fixed-matrix regenerator working in the Electric Thermal Storage heating system 01008

Piotr Cisek, Dawid Taler and Grzegorz Cisek

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001008

• Abstract
• PDF (1.446 MB)
• References

Open Access

Experimental and numerical studies of heat and mass transfer in low-temperature heat accumulator with phase transformations of accumulating material 01009

Valery Gorobets, Ievgen Antypov, Viktor Trokhaniak and Yurii Bohdan

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001009

• Abstract
• PDF (630.5 KB)
• References

Open Access

Analysis of heat transfer in a coated bed of an adsorption chiller 01010

Karolina Grabowska, Marcin Sosnowski, Jaroslaw Krzywanski, Karol Sztekler, Wojciech Kalawa, Anna Zylka and Wojciech Nowak

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001010

• Abstract
• PDF (644.6 KB)
• References

Open Access

The application of Picard method in identification of the heat transfer coefficient in flow boiling in a minichannel 01011

Mirosław Grabowski, Sylwia Hożejowska, Anna Pawińska and Mieczysław E. Poniewski

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001011

• Abstract
• PDF (1.207 MB)
• References

Open Access

The application of Fourier transform to the identification of temperature distribution in HFE-7100 flow boiling in an annular minigap 01012

Sylwia Hożejowska and Magdalena Piasecka

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001012

• Abstract
• PDF (900.8 KB)
• References

Open Access

An inverse geometric problem in steady state heat conduction – the solution and stability analysis 01013

Leszek Hożejowski

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001013

• Abstract
• PDF (854.3 KB)
• References

Open Access

Numerical analysis of lifted hydrogen flame 01014

Sohail Iqbal, Björn Pfeiffelmann, Ali Cemal Benim and Franz Joos

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001014

• Abstract
• PDF (1.112 MB)
• References

Open Access

Experimental and numerical investigation on the impact of vacuum level on effective thermal conductivity and microstructure of carbon fibre reinforced epoxy composites manufactured by vacuum bag method 01015

Michał Kubiś, Mirosław Seredyński, Łukasz Cieślikiewicz, Tomasz Wiśniewski and Anna Boczkowska

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001015

• Abstract
• PDF (1.383 MB)
• References

Open Access

Turbulence models impact on the flow and thermal analyses of jet impingement 01016

Tomasz Kura, Elżbieta Fornalik-Wajs, Jan Wajs and Sasa Kenjeres

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001016

• Abstract
• PDF (1002 KB)
• References

Open Access

Modelling microwave heating of an oil palm mesocarp 01017

Ming Law and Jessie Chang

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001017

• Abstract
• PDF (1.236 MB)
• References

Open Access

On modeling of the initial stage of nonstationary nucleate boiling for the high heat fluxes 01018

Anatoliy Levin and Polina Khan

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001018

• Abstract
• PDF (796.3 KB)
• References

Open Access

Influence of vacuum level on insulation thermal performance for LNG cryogenic road tankers 01019

Lisowski Edward and Lisowski Filip

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001019

• Abstract
• PDF (742.2 KB)
• References

Open Access

Development of hybrid model based on Lattice Boltzmann Method and Cellular Automata devoted for phase transformation – simulation of heat flow with consideration of enthalpy 01020

Łukasz Łach, Robert Straka and Dmytro Svyetlichnyy

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001020

• Abstract
• PDF (870.0 KB)
• References

Open Access

Development and validation of an inverse method for identification of thermal characteristics of a short laser pulse 01021

Piotr Łapka, Karol Pietrak, Małgorzata Kujawińska, Marcin Malesa and Łukasz Oniszk

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001021

• Abstract
• PDF (1.110 MB)
• References

Open Access

Preliminary mathematical and numerical transient models of convective heating and drying of a brick 01022

Piotr Łapka, Michał Wasik, Piotr Furmański, Mirosław Seredyński, Łukasz Cieślikiewicz, Karol Pietrak, Michał Kubiś, Tomasz S. Wiśniewski and Maciej Jaworski

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001022

• Abstract
• PDF (878.3 KB)
• References

Open Access

Thermal and water transfer in cementitious porous medium: thermal building and durability 01023

Xiaoyan Ma, Farid Benboudjema and Rachid Bennacer

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001023

• Abstract
• PDF (1.029 MB)
• References

Open Access

Heat transfer coefficient determination using the FEM with time-dependent Trefftz-type basis functions in subcooled flow boiling in a minichannel 01024

Beata Maciejewska and Magdalena Piasecka

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001024

• Abstract
• PDF (775.6 KB)
• References

Open Access

Effect of baffle shape in heat transfer for jet impingement on a solid block 01025

Muthukannan Marimuthu, Uthayakumar, Rajesh Kanna P, Paweł Ocłoń, Jan Taler and Dawid Taler

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001025

• Abstract
• PDF (1.040 MB)
• References

Open Access

Numerical study of the effect of heat transfer on solid phase formation during decompression of CO₂ in pipelines 01026

Sergey Martynov, Wentian Zheng and Haroun Mahgerefteh

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001026

• Abstract
• PDF (776.9 KB)
• References

Open Access

Natural convection in a rotating cavity partially filled with a porous medium under the effect of a local heater 01027

Stepan Mikhailenko and Mikhail Sheremet

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001027

• Abstract
• PDF (481.2 KB)
• References

Open Access

Comparison of predictive methods for flow boiling heat transfer in conventional channels and minichannels – the effect of reduced pressure 01028

Dariusz Mikielewicz and Blanka Jakubowska

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001028

• Abstract
• PDF (1.053 MB)
• References

Open Access

Leidenfrost evaporation of water droplet 01029

Tadeusz Orzechowski

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001029

• Abstract
• PDF (837.7 KB)
• References

Open Access

A thermal parametric study of non-evaporative spray cooling process 01030

Abdessalam Otmani, Hocine Mzad and Kamel Bey

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001030

• Abstract
• PDF (931.2 KB)
• References

Open Access

Numerical study of the quenching of a laminar premixed hydrogen flame 01031

Björn Pfeiffelmann and Ali Cemal Benim

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001031

• Abstract
• PDF (901.6 KB)
• References

Open Access

Numerical analysis of liquid jet impingement cooling of a thermoelectric generator 01032

Björn Pfeiffelmann, Ali Cemal Benim and Franz Joos

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001032

• Abstract
• PDF (1.298 MB)
• References

Open Access

The flow boiling heat transfer coefficient determination in a minichannel used the FEM combined with Trefftz functions 01033

Magdalena Piasecka, Kinga Strąk and Beata Maciejewska

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001033

• Abstract
• PDF (974.5 KB)
• References

Open Access

Modelling of propane emissions from a tank containing a liquefied phase 01034

Zdzisław Salamonowicz and Radosław Makowski

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001034

• Abstract
• PDF (962.9 KB)
• References

Open Access

Assessment of gas permeability through porous skeletal media with anisotropic internal structure 01035

Grzegorz Wałowski and Gabriel Filipczak

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001035

• Abstract
• PDF (1.606 MB)
• References

Open Access

Review of existing and development of a novel mathematical model for supercritical CO₂ cycles working fluid 01036

Marcin Wołowicz, Jarosław Milewski and Piotr Lis

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001036

• Abstract
• PDF (957.8 KB)
• References

Open Access

The possibility of simplified modelling of radiation heat transfer within a steel porous charge 01037

Rafał Wyczółkowski, Tomasz Wyleciał and Marek Gała

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001037

• Abstract
• PDF (998.7 KB)
• References

Open Access

Heat transfer study on a hybrid smooth and spirally corrugated tube 01038

Chen Yang, Min-rui Chen, Jin-yuan Qian, Zan Wu, Zhi-jiang Jin and Bengt Sunden

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001038

• Abstract
• PDF (670.3 KB)
• References

Open Access

Thermal performance and redesign of beam stoppers under superficial heat transfer from intense ion beams in matter 01039

André Pilan Zanoni, Jose Antonio Briz Monago and Marco Calviani

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001039

• Abstract
• PDF (1.258 MB)
• References

Open Access

Numerical study of the effect of forced convective flow on dropwise condensation by thermal LBM simulation 01040

Shaofei Zheng, Ferdinand Eimann, Tobias Fieback and Ulrich Gross

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001040

• Abstract
• PDF (8.520 MB)
• References

Open Access

Numerical study of heat and mass flow in layered heat storage 01041

Bartosz Ziegler, Jędrzej Mosiężny and Paweł Czyżewski

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824001041

• Abstract
• PDF (855.7 KB)
• References

Open Access

Experimental investigation on straight and u-bend double tube heat exchanger with active and passive enhancement methods 02001

Rafal Andrzejczyk, Tomasz Muszynski and Przemysław Kozak

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824002001

• Abstract
• PDF (738.0 KB)
• References

Open Access

Air flow characteristics of a room with air vortex diffuser 02002

Marek Borowski, Marek Jaszczur, Daniel Satoła and Michał Karch

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824002002

• Abstract
• PDF (1.026 MB)
• References

Open Access

An analysis of the innovative exhaust air energy recovery heat exchanger 02003

Marek Borowski, Marek Jaszczur, Daniel Satoła, Sławosz Kleszcz and Michał Karch

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824002003

• Abstract
• PDF (1.231 MB)
• References

Open Access

Evaluation of selected methods of the heat transfer coefficient determination in fin-and-tube cross-flow heat exchangers 02004

Tomasz Bury and Małgorzata Hanuszkiewicz Drapała

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824002004

• Abstract
• PDF (1.271 MB)
• References

Open Access

Numerical analysis and simulation of the heat recovery from wastewater using heat exchanger 02005

Timea Gabor, Ancuta-Elena Tiuc, Ioana Monica Sur and Iulian Nicolae Badila

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824002005

• Abstract
• PDF (1.042 MB)
• References

Open Access

Experimental studies and numerical modelling of heat and mass transfer process in shell-and-tube heat exchangers with compact arrangements of tube bundles 02006

Valery Gorobets, Yurii Bohdan, Viktor Trokhaniak and Ievgen Antypov

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824002006

• Abstract
• PDF (1.053 MB)
• References

Open Access

Numerical analysis of flow in a modular heat exchanger used in food industrial plants 02007

Wojciech Judt and Jarosław Bartoszewicz

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824002007

• Abstract
• PDF (900.1 KB)
• References

Open Access

Prediction or hydraulic performance of shell-and-tube heat exchanger: comparison of 1D and CFD-porous media approaches 02008

Loïck Kalioudjoglou, Clément Bonneau, Vincent Melot, Bruno Auvity, Christophe Josset and Yoann Merriaux

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824002008

• Abstract
• PDF (1.206 MB)
• References

Open Access

Theoretical modeling and experimental study of auxiliary concrete accumulator for solar heating systems 02009

Jacek Sacharczuk and Dawid Taler

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824002009

• Abstract
• PDF (1.271 MB)
• References

Open Access

Numerical and experimental study of flow distribution in tubular space of fin-and-tube heat exchanger with modified inlet manifold 02010

Tomasz Stelmach

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824002010

• Abstract
• PDF (1013 KB)
• References

Open Access

Numerical investigation of flow distribution in tubular space of fin-and-tube heat exchanger 02011

Tomasz Stelmach

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824002011

• Abstract
• PDF (1001 KB)
• References

Open Access

Performance of Air-Cooled Heat Exchanger with Laminar, Transitional, and Turbulent Tube Flow 02012

Dawid Taler

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824002012

• Abstract
• PDF (1.261 MB)
• References

Open Access

Do ionic liquids replace water or nanofluids to enhance heat transfer in micro-channel systems? 03001

Mushtaq T. Al-Asadi and Waleed T. Al-Sallami

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003001

• Abstract
• PDF (414.8 KB)
• References

Open Access

CFD analysis of a one-pass photovoltaic/thermal air system with and without offset strip fins 03002

Moustafa Al-Damook, Darron Dixon-Hardy, Peter J. Heggs, Mansour Al Qubeissi, Khaled Al-Ghaithi, Patrick E. Mason and Joshua Cottom

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003002

• Abstract
• PDF (1.520 MB)
• References

Open Access

Experimental studies of two-phase liquid metal-gas chain flow with ultrasonic echo pulse method and in the magnetic field of permanent magnets 03003

Artur Andruszkiewicz and Kerstin Eckert

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003003

• Abstract
• PDF (1.007 MB)
• References

Open Access

Effects of nanoparticles on hydraulic cavitation 03004

Min-rui Chen, Jin-yuan Qian, Zan Wu, Chen Yang, Zhi-jiang Jin and Bengt Sunden

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003004

• Abstract
• PDF (839.5 KB)
• References

Open Access

Influence of flow conditions and foam parameters on pressure drop and heat transfer in flow of fluids through channels filled with metal foams 03005

Roman Dyga, Małgorzata Płaczek and Stanisław Witczak

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003005

• Abstract
• PDF (1.061 MB)
• References

Open Access

Identifying synchronization between flow boiling inside two parallel minichannels using joint recurrence plots 03006

Hubert Grzybowski, Iwona Gruszczyńska and Romuald Mosdorf

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003006

• Abstract
• PDF (1.126 MB)
• References

Open Access

Possibility of the drag reduction effect application to reduce the cost of transport energy in water systems 03007

Zbigniew Matras and Bartosz Kopiczak

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003007

• Abstract
• PDF (998.6 KB)
• References

Open Access

The influence of the numerical solver selection on the nozzle impulse flow simulation results 03008

Przemysław Młynarczyk

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003008

• Abstract
• PDF (840.4 KB)
• References

Open Access

Meshing strategy for hybrid tet-hex PHES layered bed heat storage 03009

Jçdrzej Mosiężny and Bartosz Ziegler

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003009

• Abstract
• PDF (1009 KB)
• References

Open Access

Experimental validation of pressure drop models during flow boiling of R134a – effect of flow acceleration and entrainment 03010

Tomasz Muszynski, Rafal Andrzejczyk and Carlos Dorao

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003010

• Abstract
• PDF (1.155 MB)
• References

Open Access

Computational analysis of a cross flow turbine performance 03011

Vanessa Ruiz Gómez, Edison A. Palacio Higuita and Aldo Germán Benavides Morán

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003011

• Abstract
• PDF (895.6 KB)
• References

Open Access

Analysis of flow through channel with mounted blades 03012

Łukasz Semkło and Łukasz Gierz

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003012

• Abstract
• PDF (1.228 MB)
• References

Open Access

Influence of crystal growth kinetics on prediction of macro segregation by micro-macroscopic simulation of binary alloy solidification 03013

Mirosław Seredyñski and Jerzy Banaszek

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003013

• Abstract
• PDF (963.2 KB)
• References

Open Access

Transient free convection in an inclined square porous cavity filled with a nanofluid using LTNE and Buongiorno’s models 03014

Mikhail Sheremet and Ioan Pop

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003014

• Abstract
• PDF (1.831 MB)
• References

Open Access

Effect of viscous dissipation in two-dimensional Stokes flow between rotating cylinders – preliminary numerical investigation 03015

Tomasz Janusz Teleszewski

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003015

• Abstract
• PDF (1.263 MB)
• References

Open Access

Viscous dissipation effect on laminar forced convection in a circular duct with adiabatic walls - preliminary numerical investigation 03016

Tomasz Janusz Teleszewski

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824003016

• Abstract
• PDF (1.329 MB)
• References

Open Access

Prediction and measurement of the aerodynamic performance of a wind turbine 04001

Ali Cemal Benim, Michael Diederich and Fethi Gül

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824004001

• Abstract
• PDF (557.7 KB)
• References

Open Access

Numerical study of an asymmetrically heated rectangular duct with suspended cylinders 04002

Gaurav Kumar Chhaparwal, Ankur Srivastava and Ram Dayal

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824004002

• Abstract
• PDF (969.8 KB)
• References

Open Access

Temporal load resolution impact on PV/grid system energy flows 04003

Marek Jaszczur, Qusay Hassan and Janusz Teneta

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824004003

• Abstract
• PDF (1.163 MB)
• References

Open Access

An analysis of temperature distribution in solar photovoltaic module under various environmental conditions 04004

Marek Jaszczur, Qusay Hassan, Janusz Teneta, Ewelina Majewska and Marcin Zych

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824004004

• Abstract
• PDF (1.362 MB)
• References

Open Access

Study of dust deposition and temperature impact on solar photovoltaic module 04005

Marek Jaszczur, Qusay Hassan, Janusz Teneta, Katarzyna Styszko, Weronika Nawrot and Robert Hanus

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824004005

• Abstract
• PDF (798.7 KB)
• References

Open Access

Tilt optimization of a double-glazed air solar collector prototype 04006

Hocine Mzad, Abdessalam Otmani, Abdallah Haouam, Stanisław Łopata and Pawel Ocłoń

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824004006

• Abstract
• PDF (1.231 MB)
• References

Open Access

Energy saving and optimum insulation thicknesses in building upgrading 04007

Mateusz Orzechowski and Tadeusz Orzechowski

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824004007

• Abstract
• PDF (752.8 KB)
• References

Open Access

The influence of temperature on algal biomass growth for biogas production 04008

Monika Pawlita-Posmyk, Małgorzata Wzorek and Małgorzata Płaczek

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824004008

• Abstract
• PDF (1.871 MB)
• References

Open Access

A computational investigation of the hydrodynamics of the Badush dam in northern Iraq 04009

Younis Saida Saeedrashed and Ali Cemal Benim

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824004009

• Abstract
• PDF (830.7 KB)
• References

Open Access

A numerical analysis of the thermohydraulics of an EGS project in Turkey 05001

Ali Cemal Benim, Aydin Cicek and Arif Mert Eker

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005001

• Abstract
• PDF (666.7 KB)
• References

Open Access

Simulation of water turbine integrated with electrical generator 05002

Dariusz Borkowski, Michał Węgiel, Paweł Ocłoñ and Tomasz Węgiel

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005002

• Abstract
• PDF (703.4 KB)
• References

Open Access

A model of the novel concept liquid piston engine sourced by waste heat 05003

Wojciech Bujalski, Kamil Futyma, Jarosław Milewski and Arkadiusz Szczęśniak

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005003

• Abstract
• PDF (665.1 KB)
• References

Open Access

About the shortwave multiple reflections in an urban street canyon building related to three different European climates 05004

Chiara Colucci, Luca Mauri and Andrea Vallati

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005004

• Abstract
• PDF (607.0 KB)
• References

Open Access

Thermal management of machine compartment in a built-in refrigerator 05005

Milind Devle, Ankur Garg and Darci Cavali

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005005

• Abstract
• PDF (1.208 MB)
• References

Open Access

Shape and operation optimization of a thick-walled power boiler component 05006

Piotr Duda and Mirosław W. Mrzygłód

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005006

• Abstract
• PDF (742.6 KB)
• References

Open Access

New start-up curves for a 200 MW steam boiler with natural circulation 05007

Piotr Dzierwa

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005007

• Abstract
• PDF (779.7 KB)
• References

Open Access

Steady state CFD analysis of heat transfer coefficient in pressurised pipes of super-heater of OP210 steam boiler 05008

Mariusz Granda

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005008

• Abstract
• PDF (998.1 KB)
• References

Open Access

Calculations of the pressure drop in the natural circulation boiler evaporator 05009

Slawomir Grądziel and Karol Majewski

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005009

• Abstract
• PDF (858.6 KB)
• References

Open Access

An analysis of high-temperature nuclear reactor coupled with gas turbine combined cycle 05010

Marek Jaszczur, Michał Dudek, Tomasz Śliwa and Zygmunt Kolenda

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005010

• Abstract
• PDF (684.3 KB)
• References

Open Access

3-D simulation using for hydraulic calculation of the heat Accumulator 05011

Olha Kletska, Anatoliy Falendysh, Arthur Kagramanjan and Andrey Onishchenko

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005011

• Abstract
• PDF (1.150 MB)
• References

Open Access

Modeling of the heat transfer process in an air heat pump fanless evaporator 05012

Piotr Kopeć and Beata Niezgoda-Żelasko

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005012

• Abstract
• PDF (771.1 KB)
• References

Open Access

The environmental impact of refuse derived fuel co-combustion with lignite 05013

Piotr Krawczyk, Krzysztof Badyda and Aleksandra Mikołajczak

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005013

• Abstract
• PDF (387.7 KB)
• References

Open Access

Modeling of a re-heat two-stage adsorption chiller by AI approach 05014

Jaroslaw Krzywanski, Karolina Grabowska, Marcin Sosnowski, Anna Żyłka, Karol Sztekler, Wojciech Kalawa, Tadeusz Wójcik and Wojciech Nowak

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005014

• Abstract
• PDF (292.9 KB)
• References

Open Access

CFD modelling and validation of the rotary lobe compressed air expander 05015

Michalina Kurkus-Gruszecka, Piotr Krawczyk and Piotr Łapka

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005015

• Abstract
• PDF (874.0 KB)
• References

Open Access

Review of audit calculation activities on the applicability of CFD software to nuclear safety problems 05016

Gong-Hee Lee

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005016

• Abstract
• PDF (9.126 MB)
• References

Open Access

Verification of the heat transfer model for screw reactor 05017

Anatoliy Levin, Alexander Kozlov, Denis Svishchev and Maxim Penzik

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005017

• Abstract
• PDF (456.9 KB)
• References

Open Access

First and second order dual phase lag equation. Numerical solution using the explicit and implicit schemes of the finite difference method 05018

Ewa Majchrzak and Bohdan Mochnacki

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005018

• Abstract
• PDF (616.1 KB)
• References

Open Access

Review of the literature discussing the problem of uneven thermal stresses in the furnace chamber 05019

Marek Majdak

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005019

• Abstract
• PDF (238.4 KB)
• References

Open Access

Thermal flow analysis of vertical combustion chamber waterwall tubes operation 05020

Marek Majdak and Sławomir Grądziel

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005020

• Abstract
• PDF (415.8 KB)
• References

Open Access

Numerical modelling of retrofitting an industrial boiler type OP-230 for predicting NOx reduction 05021

Przemysław Motyl and Jan Łach

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005021

• Abstract
• PDF (667.0 KB)
• References

Open Access

A model of water-spray cooling effect on a continuous casting process 05022

Hocine Mzad, Abdessalam Otmani, Kamel Bey and Stanisław Łopata

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005022

• Abstract
• PDF (486.4 KB)
• References

Open Access

Study of Chlorella vulgaris sedimentation process 05023

Agnieszka Patyna, Małgorzata Płaczek and Stanisław Witczak

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005023

• Abstract
• PDF (545.6 KB)
• References

Open Access

Numerical prediction of steady state temperature based on transient measurements 05024

Ewa Pelińska-Olko and Marek Lewkowicz

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005024

• Abstract
• PDF (518.6 KB)
• References

Open Access

Comparison of dust emissions from an individual wood-fired boiler and dust emissions in the production of the same amount of heat in a combined heat and power plant 05025

Amadeusz Rak and Leszek Kulesza

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005025

• Abstract
• PDF (241.1 KB)
• References

Open Access

Prediction of a methane circular pool fire with fireFoam 05026

Camilo Sedano, Omar López, Alexander Ladino and Felipe Muñoz

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005026

• Abstract
• PDF (821.9 KB)
• References

Open Access

Numerical investigation of passive stabilization of the surface temperature using PCM and metal foam 05027

Mirosław Seredyński

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005027

• Abstract
• PDF (709.4 KB)
• References

Open Access

Numerical research of solidification dynamics with anisotropy and thermal fluctuations 05028

Przemysław Smakulski, Jun Ishimoto and Sławomir Pietrowicz

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005028

• Abstract
• PDF (525.8 KB)
• References

Open Access

Heating of thick-walled steam header – an experimental study 05029

Tomasz Sobota

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005029

• Abstract
• PDF (766.3 KB)
• References

Open Access

Determination of heat losses through building partitions 05030

Tomasz Sobota and Jan Taler

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005030

• Abstract
• PDF (886.3 KB)
• References

Open Access

Pipeline heating and cooling 05031

Tomasz Sobota, Dawid Taler and Szczepan Lubecki

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005031

• Abstract
• PDF (909.1 KB)
• References

Open Access

Transient heat transfer at fluid flow in a thick-walled pipeline 05032

Tomasz Sobota, Dawid Taler and Szczepan Lubecki

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005032

• Abstract
• PDF (352.1 KB)
• References

Open Access

The influence of adsorption chillers on CHP power plants 05033

Karol Sztekler, Wojciech Kalawa, Sebastian Stefański, Jarosław Krzywanski, Karolina Grabowska, Marcin Sosnowski and Wojciech Nowak

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005033

• Abstract
• PDF (351.1 KB)
• References

Open Access

Modeling of the boiler economizer 05034

Marcin Trojan and Mariusz Granda

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005034

• Abstract
• PDF (767.0 KB)
• References

Open Access

Influence of selected cycle components parameters on the supercritical CO₂ power unit performance 05035

Marcin Wołowicz, Jarosław Milewski and Gabriel Ziembicki

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005035

• Abstract
• PDF (419.7 KB)
• References

Open Access

Pulverized coal gasification with steam and flue gas 05036

Robert Zarzycki

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005036

• Abstract
• PDF (1.300 MB)
• References

Open Access

Cyclone furnace as a way for mercury removal from lignite 05037

Robert Zarzycki and Michał Wichliński

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005037

• Abstract
• PDF (1.158 MB)
• References

Open Access

Proposed liquid CO₂ cycle refrigeration system for heat hazard control 05038

Xiaowei Zhai, Yu Xu, Zhijin Yu and Kai Wang

Published online: 27 November 2018

DOI: https://doi.org/10.1051/matecconf/201824005038

• Abstract
• PDF (614.1 KB)
• References

Open Access

Formation of bubble chains over twin nozzles 05039

Paweł Dzienis, Romuald Mosdorf, Daniel Tomaszuk and Wiotold Suchecki

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824005039

• Abstract
• PDF (542.3 KB)
• References

Open Access

Numerical simulation of fast atmospheric pressure discharge in gas diode with plane-grid cathode system 05040

Vasily Kozhevnikov, Andrey Kozyrev, Natalia Semeniuk and Aleksandr Kokovin

Published online: 07 December 2018

DOI: https://doi.org/10.1051/matecconf/201824005040

• Abstract
• PDF (2.328 MB)
• References