Free Access to the whole issue

Open Access

Statement of Peer review

Published online: 14 January 2019

• PDF (44.5 KB)

Open Access

About the conference

Published online: 14 January 2019

• PDF (104 KB)

Open Access

Preface 00001

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925300001

• Abstract
• PDF (524.3 KB)

Material Properties & Characterization

Open Access

Stiffness Analysis and Experimental Verification of Segment Frame of Continuous Casting Machine 01001

Zhufeng Lei, Wenbin Su, Bingrui Hou and Qi Gao

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925301001

• Abstract
• PDF (922.5 KB)
• References

Open Access

Characterisation of Cellulose Nanofibres Derived from Chemical and Mechanical Treatments 01002

Martini Muhamad, Peter Hornsby, Eugene Carmichael, Muhammad Zakaria, Yew Been Seok, Saiful Mohamed and Shekhar Sharma

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925301002

• Abstract
• PDF (637.6 KB)
• References

Open Access

Study of Strain-Softening Stage in Structurally Inhomogeneous Materials 01003

Vladimir Mironov and Olga Lukashuk

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925301003

• Abstract
• PDF (781.8 KB)
• References

Open Access

Two Approaches to the Problem of High-cycle Fatigue of Materials and Structures 01004

Vladimir Mironov, Lukashuk and Dmitriy Ogorelkov

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925301004

• Abstract
• PDF (705.2 KB)
• References

Open Access

Residual Stress Distribution Analysis in Advanced Materials by Neutron Diffraction: The Case of Spherical Storage Tank Butt Weld 01005

Charles Hervoches, Miroslav Vrána, Pavol Mikula, Ľuboš Mráz, Peter Baksa and Milan Baláž

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925301005

• Abstract
• PDF (1.012 MB)
• References

Open Access

The Research on Shear Properties of Deformable Ground Soil under High-speed Driving Conditions 01006

Wei-wei Lyu, Zhong-xin Li and Peng Lou

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925301006

• Abstract
• PDF (619.8 KB)
• References

Open Access

The Effect of Hypervelocity Impact Loading on Explosively Welded Ti/Al/Al Plate 01007

Marcin Wachowski, Teresa Fras, Robert Kosturek, Lucjan Śnieżek, Ireneusz Szachogłuchowicz and Krzysztof Grzelak

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925301007

• Abstract
• PDF (687.4 KB)
• References

Open Access

Volume Deformation Characteristics of Concrete Mixture during Thermal Curing Process 01008

Y Xiang, Y Xie, G Long and L Li

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925301008

• Abstract
• PDF (678.1 KB)
• References

Material Design & Modelling

Open Access

Repair Delaminations in Carbon/epoxy Laminates 02001

A.M. Amaro, M.A. Neto, A.J.R. Loureiro, M.P. Silva and P.N.B. Reis

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925302001

• Abstract
• PDF (660.8 KB)
• References

Open Access

Models of Geometrically “Stabilized” Laser Cavity 02002

A. Aissani, S. Leghmizi and K. Battou

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925302002

• Abstract
• PDF (583.4 KB)
• References

Open Access

Experimental Evaluation and Numerical Modelling Residual Stresses in Glass Panel 02003

Jüri Majak, Johan Anton, Erko Õunapuu, Fabio Auriemma, Meelis Pohlak, Martin Eerme and Aleksander Klauson

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925302003

• Abstract
• PDF (842.7 KB)
• References

Open Access

Effect of Fiber Volume Fraction on Behavior of Concrete Beams Made with Recycled Concrete Aggregates 02004

Wael Alnahhal and Omar Aljidda

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925302004

• Abstract
• PDF (556.4 KB)
• References

Open Access

Recycling of Mixed Poly(Ethylene-terephthalate) and Poly(Lactic Acid) 02005

Daniel Gere and Tibor Czigany

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925302005

• Abstract
• PDF (753.8 KB)
• References

Material Manufacturing & Process

Open Access

Antibacterial Effect of Ginseng/polyaniline Encapsulated in Poly(Lactic-co-glycolic Acid) Microcapsules Coating on Stainless Steel 316L 03001

Siti Khadijah Lukman and Syafiqah Saidin

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925303001

• Abstract
• PDF (804.2 KB)
• References

Open Access

A Copper Oxide (CuO) Thin Films Deposited by Spray Pyrolysis Method 03002

Youcef Bellal, Antar Bouhank, Hacene Serrar, Tunç Tüken and Gökmen Sığırcık

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925303002

• Abstract
• PDF (864.7 KB)
• References

Open Access

Additive Manufacturing in Vascular Stent Fabrication 03003

Lei Yang, Xin Chen, Lei Zhang, Lei Li, Shuangzhu Kang, Chengjin Wang and Wei Sun

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925303003

• Abstract
• PDF (485.6 KB)
• References

Open Access

The Influence of Long-term Ageing on the Microstructure of Sanicro 25 Steel 03004

Marek Sroka, Adam Zieliński, Grzegorz Golański and Marek Kremzer

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925303004

• Abstract
• PDF (1.035 MB)
• References

Open Access

The Corrosion Studies of Electron Beam Welded Nickel Alloy 03005

M. Sroka, E. Jonda, M. Węglowski and S. Błacha

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925303005

• Abstract
• PDF (747.5 KB)
• References

Open Access

Oxidation Resistance of Modified Aluminide Coatings 03006

Jolanta Romanowska, Maryana Zagula-Yavorska and Łukasz Kolek

Published online: 14 January 2019

DOI: https://doi.org/10.1051/matecconf/201925303006

• Abstract
• PDF (635.0 KB)
• References