Open Access
Issue
MATEC Web Conf.
Volume 252, 2019
III International Conference of Computational Methods in Engineering Science (CMES’18)
Article Number 05009
Number of page(s) 6
Section Computer Simulations of Processes Phenomena
DOI https://doi.org/10.1051/matecconf/201925205009
Published online 14 January 2019
  1. D. Sędziak, R. Regulski, Solid State Phenom. 220, 520-525 (2015) [CrossRef] [Google Scholar]
  2. D. Sędziak, Arch. Technol. Masz. Autom., 26, 185-190 (2006) [Google Scholar]
  3. A. Milecki, Arch. Technol. Masz. Autom., 26, 177-184, (2006) [Google Scholar]
  4. A. Plummer, Proceedings of 10th International Fluid Power Conference, 2, 405-424 (2016). [Google Scholar]
  5. S. A. Rios, A. J. Fleming, Y. K. Yong, International Conference on Advanced Intelligent Mechatronics, (IEEE, 982-986, 2016) [Google Scholar]
  6. S. A. Rios, A. J. Fleming, Y. K. Yong, IEEE/ASME Trans. Mechatron. 23, 524-530 (2018) [CrossRef] [Google Scholar]
  7. R. J. Wood, IEEE Trans. Robot. 24, 341–347 (2008) [CrossRef] [Google Scholar]
  8. S.J. Jeong, M.-S. Kim, J.-S. Song, H. Lee, Sens. Actuators Phys., 48, 158-167 (2008) [CrossRef] [Google Scholar]
  9. Y. Shan, K. K. Leang, Automatica, 48, 1751-1758 (2012) [CrossRef] [Google Scholar]
  10. G.-Y. Gu, L.-M. Zhu, C.-Y. Su, H. Ding, S. Atikow, IEEE Trans. Autom. Sci. Eng. 13, 313–332 (2016) [CrossRef] [Google Scholar]
  11. Y. K. Yong, B. Ahmed, and S. O. R. Moheimani, Rev. Sci. Instrum. 81, 033701 (2010) [CrossRef] [Google Scholar]
  12. S. O. R. Moheimani, A. Fleming, Piezoelectric Transducers of Vibration Control and Damping, (Springer, 2006) [Google Scholar]
  13. C. Winter, Y. Perriard, International Conference on Electrical Machines and Systems (ICEMS), 1383–1387 (2013) [Google Scholar]
  14. M. S. Groen, Microvalves for precise dosing: proportional flow control on a chip (Enschede, 2015) [Google Scholar]
  15. M. J. F. Bertin, A. R. Plummer, C. R. Bowen, D. N. Johnston, Symposium on Fluid Power and Motion Control ASME/BATH, V001T01A034 (2014) [Google Scholar]
  16. L. Persson, A. Plummer, C. Bowen, I. Brooks, Proc Recent Advances in Aerospace Actuation Systems and Components, 99-104 (2016) [Google Scholar]
  17. J. H. McElroy, P. E. Thompson, H. E. Walker, E. H. Johnson, D. J. Radecki, R. S. Reynolds, Appl. Opt. 14, 1297–1302 (1975) [CrossRef] [Google Scholar]
  18. D. C. Jiles, D. L. Atherton, J. Magn. Magn. Mater. 61, 48–60 (1986) [CrossRef] [Google Scholar]
  19. R. C. Smith, Z. Ounaies, J. Intell. Mater. Syst. Struct. 11, 62–79 (2000) [CrossRef] [Google Scholar]
  20. K. Kuhnen and P. Krejci, IEEE Trans. Autom. Control. 54, 537–550 (2009) [CrossRef] [Google Scholar]
  21. M. A. Krasnosel’skiǐ, A. V. Pokrovskiǐ, Systems with hysteresis (Springer, 1989) [CrossRef] [Google Scholar]
  22. M. Al Janaideh, J. Mao, S. Rakheja, W. Xie, C.-Y. Su, 47th IEEE Conference on Decision and Control (IEEE, 5182-5187, 2008) [Google Scholar]
  23. Y. Liu, J. Shan, Y. Meng, D. Zhu, IEEE/ASME Trans. Mechatronics, 21, 38–43 (2016) [Google Scholar]
  24. C.J. Lin and P.T. Lin, Comput. Math. Appl. 64, 766–787 (2012). [CrossRef] [Google Scholar]
  25. C.-Y. Su, Y. Stepanenko, J. Svoboda, T.P. Leung, IEEE Trans. Autom. Control. 45, 2427–2432 (2000) [CrossRef] [Google Scholar]
  26. A. Milecki, R. Regulski, Mech. Syst. Signal Process. 78, 43–54 (2016) [CrossRef] [Google Scholar]
  27. R. Regulski, A. Nowak, B. Minorowicz, F. Stefański, Prog. in Aut., Rob. and Meas. Tech. 350, 207–213 (2015) [Google Scholar]
  28. Noliac, Piezoelectric ring bender CMBR05 datasheet,“http://www.noliac.com/products/actuators/ring-benders/show/cmbr05/[Google Scholar]
  29. R. Bouc, Proc Fourth Conf. Nonlinear Oscil. 315-319 (1967) [Google Scholar]
  30. Y. K. Wen, ASCE J Eng Mech Div. 102, 249-263 (1976) [Google Scholar]
  31. T. S. Low and W. Guo, J. Micro. Syst. 4, 230–237 (1995) [CrossRef] [Google Scholar]
  32. M. Jouaneh, ASME Jpn. Symp. Flex. Autom. 1, 631–637 (1992) [Google Scholar]
  33. Noliac, NCE57 material specification datasheet, “http://www.noliac.com/products/materials/nce57/[Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.