MATEC Web Conf.
Volume 252, 2019III International Conference of Computational Methods in Engineering Science (CMES’18)
|Number of page(s)||6|
|Section||Exploitation Machine Building|
|Published online||14 January 2019|
Control and data acquisition system for the rolling machine
Lublin University of Technology, Department of Structural Mechanics, Nadbystrzycka 40, 20-618 Lublin, Poland
2 Lublin University of Technology, Inst. of Electrical Engineering and Electrotechn., Nadbystrzycka 38A, 20-618 Lublin, Poland
* Corresponding author: email@example.com
Rolling machines are often used for forming flat elements or pipes. Problems occur when used to produce cylindrical elements other than pipes, or when experimental materials are used. It is required to introduce flexible control of the rolling process parameters in such cases. It is necessary to monitor the device operating parameters. When a rolling machine works with experimental materials, there are no typical control and acquisition data systems available. The article presents the concept and capabilities of the control and computer data acquisition system supporting the rolling process. The main task of software system is acquisition of force and kinetic parameters related to the analysed process of the compression during rolling. This system allows current recording and analysis of five physical values. The acquisition data application is developed in National Instruments LabVIEW environment. The software algorithm is based on the state machine. The article contains a detailed description of hardware and software implementation of the functions mentioned.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.