MATEC Web Conf.
Volume 252, 2019III International Conference of Computational Methods in Engineering Science (CMES’18)
|Number of page(s)||5|
|Section||Computer Simulations of Processes Phenomena|
|Published online||14 January 2019|
Experimental verification of a numerical surface roughness model for metallic bodies under large plastic strain
Faculty of Mechanical Engineering, Bialystok University of Technology, Wiejska 45C, 15-351 Bialystok, Poland
* Corresponding author: firstname.lastname@example.org
The present work describes selected aspects of numerical modelling of the process of bonding metal alloys with consideration for micro-roughness, as well as experimental verification. The plastic-elastic contact between two deformable bodies was investigated in a DEFROM FEM environment, and verified at the test stand. The present paper demonstrates selected results of contact modelling investigated using aluminium-copper samples, in relation to their elastic-plastic range. The real surface profile helped to create a mathematical model of surface roughness measured using a laser microscope. Dependency between a blade of a tool and a feed was used to build a numerical model of roughness based on the arithmetic average value of the roughness profile. The work presents also a process of simplification of real surface roughness for the needs of numerical calculations. The paper investigates an impact of wave roughness at obtained values on effective plastic strain and stress. Additionally, numerical analysis shows a need to enter a new roughness wave correction factor assuming a zero value of the coefficient of friction. This is due to the interaction of metallic surfaces within the plastic contact zone. The obtained results allow the estimation of the impact of surface force interaction expressed by the wave coefficient factor. The experimental verification of numerical calculations allowed the estimation of the actual impact of the micro-cutting process in the entire friction process. Further analysis of obtained results permits the author to explain the surface phenomena occurring during the friction process, such as adhesion or diffusion, and outline the development direction of numerical methods.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.