Issue |
MATEC Web Conf.
Volume 252, 2019
III International Conference of Computational Methods in Engineering Science (CMES’18)
|
|
---|---|---|
Article Number | 06002 | |
Number of page(s) | 6 | |
Section | Exploitation Machine Building | |
DOI | https://doi.org/10.1051/matecconf/201925206002 | |
Published online | 14 January 2019 |
Analysis of a dimensional tolerances’ series of 2PW-SE gear pumps using multi valued logical trees
1
Opole University of Technology, Faculty of Production Engineering and Logistics, Poland
2
Wroclaw University of Science and Technology, Faculty of Mechanical Engineering, Poland
* Corresponding author: a.deptula@po.opole.pl
Gear pumps of a prototype series 2PW-SEW belonging to II group were the research object. Wrocław University of Technology in co-operation with the company HYDROTOR S.A. designed the units. The experimental pump has been designed with taking into consideration technological possibilities of the company HYDROTOR S.A. The innovation of the prototype unit is based on using oblique gears with an involute tooth modified in the lower and upper part of the profile. The modification in the lower part was made using the so-called tooth root undercutting. Multivalent logic trees with designated rank of importance parameters structural/operational were used, considering the effect of tolerances construction. The area has been increased by cutting the oblique teeth. In order to determine the influence of the manufacturing technology on the level of the emitted noise, it has been decided to make gears using the shaving technology.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.