Issue |
MATEC Web Conf.
Volume 252, 2019
III International Conference of Computational Methods in Engineering Science (CMES’18)
|
|
---|---|---|
Article Number | 06004 | |
Number of page(s) | 5 | |
Section | Exploitation Machine Building | |
DOI | https://doi.org/10.1051/matecconf/201925206004 | |
Published online | 14 January 2019 |
Controlling the industrial robot model with the hybrid BCI based on EOG and eye tracking
Institute of Mechanical Technology, Poznan University of Technology, 3 Piotrowo St., 60-965 Poznan, Poland
* Corresponding author: arkadiusz.kubacki@put.poznan.pl
The article describes the design process of building a hybrid brain-computer interface based on Electrooculography (EOG) and centre eye tracking. In the first paragraph authors presented theoretical information about Electroencephalography (EEG), Electrooculography (EOG), and Eye. Authors prepared an overview of the literature concerning hybrid BCIs. The interface was built with use of bioactive sensors mounted on the head. Movement of industrial robot model was triggered by a signal from eyes movement by EOG and eye tracking. The built interface has been tested. Three experiments were carried out. In all experiments, three people aged 25-35 were involved. 30 attempts per scenario were recorded. Between each attempt, a respondent had a 1-minute break. The investigators attempted to move cube from one table to the other.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.