Free Access to the whole issue

Open Access

Committees

Published online: 12 October 2015

• PDF (28.6 KB)

Open Access

Statement of Peer review

Published online: 12 October 2015

• PDF (218 KB)

Open Access

Preface 00001

Jasmine Zhou and Hao Gong

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152600001

• Abstract
• PDF (34.08 KB)

Advanced materials and properties

Open Access

The Effect of Different Sintering Strategies on Properties of YSZ Reinforced Graphene Composites 01001

Kalaimani Markandan, Jit Kai Chin and Michelle T.T Tan

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152601001

• Abstract
• PDF (1.085 MB)
• References

Open Access

A Model of Foam Density Prediction for Expanded Perlite Composites 01002

Md Arifuzzaman and Ho Sung Kim

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152601002

• Abstract
• PDF (852.7 KB)
• References

Open Access

Study of Interaction between Fly Ash-cement and Bentonite Matrices 01003

Tomáš Daněk, Jan Thomas and Jan Jelínek

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152601003

• Abstract
• PDF (538.8 KB)
• References

Open Access

Material of Burned Coal Wastes Spoil Heaps As Source of Mullite for Ceramic Industry 01004

Tomáš Daněk, Jan Jelínek and Jan Thomas

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152601004

• Abstract
• PDF (2.439 MB)
• References

Open Access

Preparation and Properties of Biocomposite Based on Natural Rubber and Bagasse Nanocellulose 01005

Methakarn Jarnthong, Fei Wang, Xiao Yi Wei, Rui Wang and Ji Hua Li

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152601005

• Abstract
• PDF (3.233 MB)
• References

Open Access

CdSe Nanoparticles with Clean Surfaces: Gas Phase Synthesis and Optical Properties 01006

Hongwei Zhang, Xing Peng, Lin Sun and Fei Liu

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152601006

• Abstract
• PDF (3.216 MB)
• References

Open Access

Temperature Effect on Hydroxyapatite Preparation by Co-precipitation Method under Carbamide Influence 01007

Jing Luo, Juan Chen, Wenzhao Li, Zhiliang Huang and Changlian Chen

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152601007

• Abstract
• PDF (4.379 MB)
• References

Open Access

Effect of Graphene Loading on Mechanical and Morphological Properties of Recycled Polypropylene/Polyaniline Nanocomposites 01008

M. R. Husin, Agus Arsad and Othman Al-Othman

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152601008

• Abstract
• PDF (992.2 KB)
• References

Open Access

PbS Thin Films for Photovoltaic Applications Obtained by Non-Traditional Chemical Bath Deposition 01009

Claudia Elena Pérez-García, Rafael Ramírez-Bon and Yuri Vorobiev

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152601009

• Abstract
• PDF (734.4 KB)
• References

Open Access

Finite Element Modeling of Roll Wear during Cold Asymmetric Sheet Rolling of Aluminum Alloy 5083 01010

A. Pesin, D. Pustovoytov, T. Shveyova and M. Sverdlik

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152601010

• Abstract
• PDF (742.4 KB)
• References

Open Access

Polarized Raman Spectroscopy and Chemometric Analysis of Micro-crystalline Silicon for Solar Cells 01011

David Adley, Tatiana S. Perova, Eamonn Monaghan and A.R. Ellingboe

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152601011

• Abstract
• PDF (598.6 KB)
• References

Material processing and preparation technology

Open Access

Determination of Optimal Parameters for Diffusion Bonding of Semi-Solid Casting Aluminium Alloy by Response Surface Methodology 02001

Somsak Kaewploy and Chaiyoot Meengam

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152602001

• Abstract
• PDF (649.3 KB)
• References

Open Access

Preparation and Characterization of Graphene 02002

Man Xu, Yun Zhu, Jia-you Ji, Fan Shen and Shu-lin Wang

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152602002

• Abstract
• PDF (1.298 MB)
• References

Open Access

Gas Phase Fabrication of Pd-Ni Nanoparticle Arrays for Hydrogen Sensor Applications 02003

Xing Peng, Hongwei Zhang, Ling Sun and Fei Liu

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152602003

• Abstract
• PDF (1.508 MB)
• References

Open Access

Gemstone Grinding Process Improvement by using Impedance Force Control 02004

Chumpol Hamprommarat, Anan Sutapun and Viboon Sangveraphunsiri

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152602004

• Abstract
• PDF (1.927 MB)
• References

Mechanical design and manufacturing

Open Access

Spur Gears Static and Dynamic Meshing Simulation and Tooth Stress Calculation 03001

Ali Jammal, Hui Wang and Yiming Rong

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152603001

• Abstract
• PDF (785.4 KB)
• References

Open Access

Urea-SCR Temperature Investigation for NOx Control of Diesel Engine 03002

Muhammad Asif, Youtong Zhang and Wei Lin

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152603002

• Abstract
• PDF (695.3 KB)
• References

Open Access

A Calibration of the Wierzbicki-Xue Damage Model Using Charpy Test Results 03003

Jong-Bong Kim, Hyunho Shin and Yo-Han Yoo

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152603003

• Abstract
• PDF (972.2 KB)
• References

Open Access

The Research of Scrapped Automobiles Recycling and Disassembling Industry Development Based on Auto Industry Chain 03004

Pang linhua and Wen Guilin

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152603004

• Abstract
• PDF (459.8 KB)
• References

Open Access

Influence of Molecular Weight Average, Degree of Crystallinity, and Viscosity of Different Polyamide PA12 Powder Grades on the Microstructures of Laser Sintered Part 03005

WAY Yusoff, Hanafi Ani, DT Pham and K. Dotchev

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152603005

• Abstract
• PDF (1.555 MB)
• References

Open Access

Finite Element Analysis of Symmetric and Asymmetric Three-roll Rolling Process 03006

A. Pesin, M. Chukin and D. Pustovoytov

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152603006

• Abstract
• PDF (1.354 MB)
• References

Open Access

Study of Different Large Bodies Manufacturing Based on Combined Methods of Deformation 03007

A. Pesin, E. Drigun, D. Pustovoytov and I. Pesin

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152603007

• Abstract
• PDF (3.142 MB)
• References

Open Access

Effect of Pulse Number on Dopant Activation in Silicon during Shallow p+/n Junction Formation by Non-Melt Excimer Laser Annealing 03008

SitiRahmah Aid, Azura Hamzah, Sumiaty Ambran, Satoru Matsumoto, Zaharah Johari and Genshu Fuse

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152603008

• Abstract
• PDF (1.009 MB)
• References

Open Access

Finite Element Modeling of Strain Distribution through Sheet Thickness during Cold Rolling with Grooved Rolls 03009

A. Pesin, D. Pustovoytov, A. Kolesnik and I. Pesin

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152603009

• Abstract
• PDF (1.408 MB)
• References

Open Access

Air Conditioning Compressor Air Leak Detection by Image Processing Techniques for Industrial Applications 03010

Kritsada Pookongchai, Prasit Nakornrat, Bongkoj Sookananta and Panhathai Buasri

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152603010

• Abstract
• PDF (1.928 MB)
• References

Open Access

Investigation of Part Feeding Problems in Manual Assembly Line 03011

Nareerat Kumnuch and Suksan Prombanpong

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152603011

• Abstract
• PDF (469.8 KB)
• References

Open Access

Finding the Optimal Condition of Exterior Spray Coating for Cookware Products 03012

Yaowarak Wongyai and Suksan Prombanpong

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152603012

• Abstract
• PDF (483.8 KB)
• References

Mechatronics and Robotics

Open Access

Research on Mixer Parametric Modeling System Based on Redevelopment of ANSYS 04001

Zheng Bin and KeLun Tang

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152604001

• Abstract
• PDF (2.393 MB)
• References

Open Access

The Analytical Review of the Condition of Heavy Class Military and Dual-Purpose Unmanned Ground Vehicle 04002

Aleksandr Blokhin, Alla Koshurina, Maxim Krasheninnikov and Roman Dorofeev

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152604002

• Abstract
• PDF (4.456 MB)
• References

Open Access

Development of Algorithms for Approaching and Docking Underwater Vehicle with Underwater Station 04003

B.V. Gurenko and A.L. Beresnev

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152604003

• Abstract
• PDF (649.5 KB)
• References

Open Access

Improved Eddy-current Field Loss Model and Scaling Index for Magnets of Permanent Magnet Synchronous Motors 04004

Lei Zhang and Chunxia Gao

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152604004

• Abstract
• PDF (547.6 KB)
• References

Open Access

Design of a Backdrivable Triglide Robot 04005

Natthapong Angsupasirikul and Ratchatin Chancharoen

Published online: 12 October 2015

DOI: https://doi.org/10.1051/matecconf/20152604005

• Abstract
• PDF (1.360 MB)
• References