EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 240 (2018) MATEC Web Conf., 240 (2018) 02005 References
Open Access
Issue
MATEC Web Conf.
Volume 240, 2018
XI International Conference on Computational Heat, Mass and Momentum Transfer (ICCHMT 2018)
Article Number 02005
Number of page(s) 8
Section Heat Exchangers
DOI https://doi.org/10.1051/matecconf/201824002005
Published online 27 November 2018
  1. A. Hepbasli, E. Biyik, O. Ekren, H. Gunerhan, M. Araz, J. Energy Conversion and Management 88, pp. 700–722 (2014) [Google Scholar]
  2. A.R. Mazhar, S. Liu, A. Shukla, J. Energies 11, 386, pg. 34. (2018) [Google Scholar]
  3. A. Balastov, N. Kachalov, E. Senkiv, O. Kachalova, J. MATEC Web of Conferences 110, 01008 (2017) [CrossRef] [EDP Sciences] [Google Scholar]
  4. M. Omidi, M. Farhadi, M. Jafari, J. Applied Thermal Engineering 110, pp. 1075–1090 (2017) [Google Scholar]
  5. O. Culha, H. Gunerhan, E. Biyik, O. Ekren A. Hepbasli, J. Energy and Buildings 104, pp. 215–232 (2015) [CrossRef] [Google Scholar]
  6. A. Matveev, D. Zelentsov, A. Louks, J. MATEC Web of Conferences 106, 06016 (2017) [CrossRef] [Google Scholar]
  7. S. Ornelas, S. Sousa, C. Dong, M. Fernelius, M. Hofer, T. Holsclaw, A. Jennison, D. Mai, K. Ninh, M. Poel, Mathematical modeling, numerical simulation and statistical optimization of heat pipe design, (Report of Center for Applied Mathematics, Computation and Statistics Departament of Mathematics, San Jose, CA, pp. 1–37, 2006) [Google Scholar]
  8. M.I. Heredia, J. Siqueiros, J.A. Hernández, D. Juárez-Romero, A. Huicochea, J.G. González-Rodríguez, J. Applied Thermal Engineering 128, pp. 737–746 (2018) [CrossRef] [Google Scholar]
  9. H. Ma, L. Yin, X. Shen, W. Lu, Y. Sun, Y. Zhang, N. Deng, J. Applied Energy 169, pp. 177–186 (2016) [CrossRef] [Google Scholar]
  10. A. Nouri-Borujerdi, M. Layeghi, J. Fluids Engineering, 126, pp. 442–448 (2004) [CrossRef] [Google Scholar]
  11. S. Knudsen, G.L. Morrison, M. Behnia, S. Furbo, J. Solar Energy, 78, 2, pp. 281–289 (2005) [CrossRef] [Google Scholar]
  12. S.F. Tsai, T.W.H. Sheu, J. Computers & Fluids, 27, 1, pp. 29–46 (1998) [CrossRef] [Google Scholar]
  13. D.J. Durrenmatt, O. Wanner, J. Water Research 48, pp. 548 558 (2014) [CrossRef] [Google Scholar]
  14. Gupta M, Numerical Study of Heat Transfer Enhancement in a Plate-Fin Heat Exchanger Using Rectangular Winglet Type Vortex Generator (Ph.D. Thesis, National Institute of Technology, Kurukshetra, India, 2010) [Google Scholar]
  15. Khan W.A, Modeling of Fluid Flow and Heat Transfer for Optimization of Pin-Fin Heat Sinks (Ph.D. Thesis, University of Waterloo, Canada, 2004) [Google Scholar]
  16. Sahiti N, Thermale and Fluid Dynamic of Pin Fin Heat Transfer Surfaces (Ph.D. Thesis, Erlangen University, Nürnberg, Germany, 2006) [Google Scholar]
  17. Williamson N.J, Numerical Modelling of Heat and Mass Transfer and Optimisation of a Natural Draft Wet Cooling Tower (Ph.D. Thesis, University of Sydney, Australia, 2008) [Google Scholar]
  18. A.A. Ozalp, I. Dincer, International Journal of Thermal Sciences, 49, pp. 1799–1812 (2010) [CrossRef] [Google Scholar]
  19. N.C. Markatos, J.Ironmaking and Steelmaking, 16, 4, pp. 266–273 (1989) [Google Scholar]
  20. Patankar S.V, Numerical Heat Transfer and Fluid Flow (Taylor & Francis, New York, 1980) [CrossRef] [Google Scholar]
  21. Olsen N.B, CFD Algorithms for Hydraulic Engineering (Norvegian University of Science and Technology, Trondheim, Norway, 2000) [Google Scholar]
  22. C.W. Hirt, B.D, Nichols, J. Computational Physics, 39, pp. 201–225 (1981) [Google Scholar]
  23. G.Y. Soh, G.H. Yeoh, V. Timchenko, International Journal of Heat and Mass Transfer, 100, pp. 573–581 (2016) [CrossRef] [Google Scholar]
  24. H-J. Laue, H. Kruse, J. Wärmepumpe Aktuell – Informationszentrum Wärmepumpen + Kältetechnik, 8, 2, pg. 2 (2009) [Google Scholar]
  25. Faghri A, Heat Pipe Science and Technology (Taylor & Francis, New York, 1995) [Google Scholar]
  26. X.-S. Yang, M. Karamanoglu, T. Luan, S. Koziel, J. Computational Science 5, pp. 119–125 (2014) [CrossRef] [Google Scholar]
  27. H. Jouhara, S. Almahmoud, A. Chauhan, B. Delpech, G. Bianchi, A. Tassou R. Llera, F. Lago, J.J. Arribas, J. Energy 141, pp. 1928–1939 (2017) [CrossRef] [Google Scholar]
  28. R.T. Dobson, T.M. Harms, Lumped parameter analysis of closed and open oscillatory heat pipes, (in: 11th Int. Heat Pipe Conf. Tokyo, 12–16 September 1999) [Google Scholar]
  29. Proskiw G. 2003, Design and Analysis of a Residential Greywater Heat Recovery System (Report Prepared for CANMET Energy Technology Centre, Canada, pg. 4, 5, 52, 2003) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.