MATEC Web Conf.
Volume 240, 2018XI International Conference on Computational Heat, Mass and Momentum Transfer (ICCHMT 2018)
|Number of page(s)||7|
|Section||Renewable Energy Sources|
|Published online||27 November 2018|
The influence of temperature on algal biomass growth for biogas production
Department of Process Engineering, Faculty of Mechanical Engineering, Opole University of Technology, Opole, Poland
* Corresponding author: email@example.com
The use of algae is gaining popularity in recent years. Algae can form a suitable substrate for biogas production because they are low in cellulose and have low lignin content. The paper contains a summary with the list of the algae species applied for the biogas production process to this date, coupled with the description of the characteristic conditions in which the process is conducted. The key importance factors during the production of biogas include, among others, grade of algae species used, temperature of the process, mode in which the material is supplied into the tank, mixing method, use of co-substrate, etc. This paper reports the results of the study involving the effect of various temperature conditions on the characteristics of the growth rate of algal biomass. The research was performed for the Chlorella vulgaris BA-0167 strain in the temperature range corresponding to the mesophilic fermentation processes in anaerobic conditions.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.