Issue |
MATEC Web Conf.
Volume 240, 2018
XI International Conference on Computational Heat, Mass and Momentum Transfer (ICCHMT 2018)
|
|
---|---|---|
Article Number | 02007 | |
Number of page(s) | 5 | |
Section | Heat Exchangers | |
DOI | https://doi.org/10.1051/matecconf/201824002007 | |
Published online | 27 November 2018 |
Numerical analysis of flow in a modular heat exchanger used in food industrial plants
Poznan University of Technology, Chair of Thermal Engineering, Piotrowo 3 St., 60-965 Poznań, Poland
* Corresponding author: wojciech.judt@put.poznan.pl
In the article is proposed a construction of modular cross-flow heat exchanger. This construction can be used in food industrial plants for example to heating a palm oil for a chips production. The second possibility to make use of that heat exchanger in a food industrial plants will be a heating of a worn out rape oil after a technological process for a improvement of effective utilization in oil boiler. The main advantage of modular heat exchangers is the possibility of simple adjustment of heating power dependent on demand. It is possible by valve system, which can cut off subsequent sections of the heat exchanger from the plant when heat requirement is decreasing. During a numerical simulation was demonstrated, that an exhaust gases flow in a heat exchanger is not homogenous. In numerical analysis was obtained a real flow velocity distribution and temperature distribution for a full geometry of the designed object and for two subsequent section of the heat exchanger.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.