Free Access to the whole issue

Open Access

About the conference

Published online: 27 August 2024

• PDF (3.77 MB)

Open Access

Statement of Peer review

Published online: 27 August 2024

• PDF (630 KB)

Open Access

Preface 00001

Y. Qin

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440100001

• Abstract
• PDF (589.2 KB)

Advanced Forming Technologies

Open Access

Implementing new Approaches of Digitization in Conventional Metal Forming Processes: A German perspective 01001

Mathias Liewald, Adrian Schenek, Tahsin Deliktas, Maxim Beck and Marcel Görz

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101001

• Abstract
• PDF (1.901 MB)
• References

Open Access

Research on the influence of pulse current parameters on the tooth filling during current-assisted splitting spinning of small module tooth-shaped part 01002

Qinxiang Xia, Haoyang Zhou, Gangfeng Xiao and Can Chen

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101002

• Abstract
• PDF (2.064 MB)
• References

Open Access

Numerical and experimental study for process improvement of cross-wedge rolling of bearing steel balls 01003

Jiapeng Wang, Baoyu Wang, Chaoyang Sun and Chuanbao Zhu

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101003

• Abstract
• PDF (2.389 MB)
• References

Open Access

Experimental studies on the effect of application methods on the lubricant performance during serial production in automotive industry 01004

Xiao Yang, Vincent Wu, Denis J. Politis and Liliang Wang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101004

• Abstract
• PDF (1.917 MB)
• References

Open Access

Single-Point Incremental Forming (SPIF) of AA5754 Aluminium Alloy Blanks: Experimental and numerical studies 01005

Yuhai Jin, Xiangnan Yu, Heli Liu, Denis J. Politis and Liliang Wang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101005

• Abstract
• PDF (2.210 MB)
• References

Open Access

Fast-cooling of aluminium alloy sheet metal for hot-stamping applications 01006

Jie Zhao, Yankang Tian, Daniel Melville, Song Yang, Bo Chen and Yi Qin

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101006

• Abstract
• PDF (3.006 MB)
• References

Open Access

Research of Superplastic Forming, Mechanical Properties, and Thermal Insulation Performance of Titanium Alloy 3D Lattice Structure 01007

Han Xiaoning, Li Zhiqiang, Sun Chaoyang, Zhao Bing, Wang Chun and Liu Yang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101007

• Abstract
• PDF (3.408 MB)
• References

Open Access

Mechanical properties prediction of high-strength aluminium alloy components formed under the PHF process 01008

Huijuan Ma, Peiliao Wang, Zhili Hu and Lin Hua

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101008

• Abstract
• PDF (2.195 MB)
• References

Open Access

Vibration characterisation in new rotational vibration-assisted incremental sheet forming 01009

Wenxuan Peng, Xuan Ouyang, Jamie Booth and Hui Long

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101009

• Abstract
• PDF (2.426 MB)
• References

Open Access

A pilot prototype production line for the hot-forming of aluminium alloy sheets with fast contact-cooling and multi-point tooling 01010

Song Yang, Jie Zhao, Yankang Tian and Yi Qin

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101010

• Abstract
• PDF (2.418 MB)
• References

Open Access

Study on the damage behaviour of titanium alloy laser-welded blank during hot gas pressure forming 01011

Di Wu, Shuaijun Huang, Kehuan Wang, Zehua Wen and Gang Liu

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101011

• Abstract
• PDF (2.236 MB)
• References

Open Access

Novel Heat Stamping of Ti6Al4V panels with high drawability and low springback 01012

Hao Wu, Famin Tian, Chuankai Tang, Ziang Guo and Nan Li

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101012

• Abstract
• PDF (2.225 MB)
• References

Open Access

Effect of rolling reduction rate on the forming of microstructures on the surface of 2024 aluminum alloy 01013

Zhenhai Xu, Tong Feng and Debin Shan

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101013

• Abstract
• PDF (2.676 MB)
• References

Open Access

An investigation of multi-pass incremental sheet forming 01014

Matthew Ridland, Lawrence Waldram, Zhenyuan Qin, Wenxuan Peng and Hengan Ou

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440101014

• Abstract
• PDF (2.614 MB)
• References

Additive Manufacturing

Open Access

Challenges with application of additive manufacturing in energy sector 02001

Robert Sekula, Grzegorz Kmita and Elham Haghighat Naeini

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102001

• Abstract
• PDF (1.857 MB)
• References

Open Access

Hybrid manufacturing of collector coins with free-moving features 02002

Pedro M.S. Rosado, Rui F.V. Sampaio, João P.M. Pragana, Ivo M.F. Bragança, Carlos M.A. Silva and Paulo A.F. Martins

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102002

• Abstract
• PDF (2.195 MB)
• References

Open Access

Spider Web-Inspired Additive Manufacturing: Unleashing the Potential of Lightweight Support Structures 02003

Liuchao Jin, Xiaoya Zhai, Kang Zhang, Jingchao Jiang and Wei-Hsin Liao

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102003

• Abstract
• PDF (2.191 MB)
• References

Open Access

Finite element modeling of machining-induced microstructure evolution of IN625 superalloy fabricated by laser-based powder bed fusion 02004

Binxun Li, Yan Xia and Bin Fang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102004

• Abstract
• PDF (2.880 MB)
• References

Open Access

Microstructure and Mechanical Properties of Crack-Free IN738G Alloy Processed by Laser Powder Bed Fusion 02005

Yi Wang, Yue Liu and Quanquan Han

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102005

• Abstract
• PDF (2.640 MB)
• References

Open Access

The route to achieve isotropy in 3D printing parts via Fused Filament Fabrication with Advanced Semicrystalline Thermoplastics 02006

Krzysztof Rodzen

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102006

• Abstract
• PDF (1.554 MB)
• References

Open Access

Optimization of process parameters for LPBF forming TC11/SiC single track 02007

Siyuan Chen, Xuedao Shu, Ziyuan Li, Dongwei Wang and Zhihao Ren

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102007

• Abstract
• PDF (2.542 MB)
• References

Open Access

An Algorithmic Framework for Optimizing Submerged Arc Additive Manufacturing Process Parameters for User-Specified Bead Width 02008

Suraj Goala and Shrikrishna N. Joshi

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102008

• Abstract
• PDF (2.012 MB)
• References

Open Access

3D printed piezoelectric composite filament width and height prediction using individual and stacking ensemble of machine learning algorithms 02009

Xiaoquan Shi, Yazhou Sun, Hangqi Zhang, Zikai Yuan, Haiying Tian and Haitao Liu

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102009

• Abstract
• PDF (1.684 MB)
• References

Open Access

An investigation into the exploratory use of additive manufacturing in stepped spillway model testing in open channel flow 02010

Robert Benham and Fayyaz Rehman

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102010

• Abstract
• PDF (2.071 MB)
• References

Open Access

Process window for manufacturing soft magnetic FeSi 6.5% by laser metal deposition 02011

Rasoul Karami, David Butler, Yashar Javadi and Saeed Tamimi

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102011

• Abstract
• PDF (3.039 MB)
• References

Open Access

Data-Driven Digital Twin Requirements for Additive Layer Manufacturing 02012

Essam Shehab, Assel Jumassultan, Nurgabyl Khoyashov, Shynar Juziyeva, Nursultan Jyeniskhan and Md Hazrat Ali

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102012

• Abstract
• PDF (1.558 MB)
• References

Open Access

A comprehensive metal additive manufacturing platform to transform the marine industry 02013

Mohsen Keshavarzan and Mohsen Mohammadi

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102013

• Abstract
• PDF (1.830 MB)
• References

Open Access

Design and development of a small-scale cement-based 3D printing robot extrusion nozzle 02014

Oluwatimilehin Disu, Sikiru Ismail, Luke Wood, Andreas Chrysanthou and Antonios Kanellopoulos

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102014

• Abstract
• PDF (2.209 MB)
• References

Open Access

An analytical review on interfacial reactions in high-temperature die-attach: The insights into the effect of surface metallization and filler materials 02015

Canyu Liu and Changqing Liu

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102015

• Abstract
• PDF (1.461 MB)
• References

Open Access

Modelling and bending analysis of a 3D-printed sandwich structure with an auxetic star-4 core 02016

Christoph Hartl, Danka Katrakova-Krüger and Hodaiah Ho

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440102016

• Abstract
• PDF (1.838 MB)
• References

Advanced Materials, Processes and Analysis

Open Access

Forming limit of hot-rolled high-strength steels considering sheet thickness effect 03001

Shi-Hong Zhang, Wei-Jin Chen, Shuai-Feng Chen, Hong-Wu Song and Si-Ying Deng

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103001

• Abstract
• PDF (2.317 MB)
• References

Open Access

Electro-Mechanical Synergy in the Design of Hybrid Busbar Distribution Systems 03002

João P.M. Pragana, Rui F.V. Sampaio, Pedro M.S. Rosado, Ivo M.F. Bragança, Carlos M.A. Silva and Paulo A.F. Martins

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103002

• Abstract
• PDF (2.265 MB)
• References

Open Access

The Forming Limit Diagram of 2A16 Aluminum Alloy Sheet Based on Hydraulic Bulging Test of Elliptical Die 03003

Zhihui Jiao, Yong Li, Peicheng Jiang, Kui Li and Lihui Lang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103003

• Abstract
• PDF (2.142 MB)
• References

Open Access

The effect of different C contents on the microstructure evolution and mechanical properties of Ti45Al6Nb alloy 03004

Hongze Fang, Kexuan Li, Lingyan Zhou, Jiangshan Liang, Xiaokang Yang and Ruirun Chen

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103004

• Abstract
• PDF (2.442 MB)
• References

Open Access

Slip system level strengthening in nano-indentation of single crystalline copper: Numerical study via a non-local CPFEM model 03005

Shuai Zhu and Emmanuel Brousseau

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103005

• Abstract
• PDF (1.895 MB)
• References

Open Access

Effect of electric field direction on the interdiffusion of Ni-Al binary alloys 03006

Shuai Wang, DongJun Wang and ZhiNan Wang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103006

• Abstract
• PDF (1.821 MB)
• References

Open Access

Study on microstructure and property evolution of additive manufactured 2219 aluminum alloy under unidirectional compression and multidirectional loading deformation 03007

Bin Shao, Heng Su, Yingying Zong and Debin Shan

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103007

• Abstract
• PDF (1.751 MB)
• References

Open Access

Uninterrupted in-situ compression of automotive expanded polypropylene, imaged via synchrotron X-ray computed tomography 03008

Craig R. Carnegie, Richard Beaumont, Richard Dashwood and Darren J. Hughes

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103008

• Abstract
• PDF (2.982 MB)
• References

Open Access

Study on the stress relaxation with synchronous ageing of near α titanium alloy 03009

Bao Qu, Shuaijun Huang, Kehuan Wang, Zehua Wen, Jie Zhao and Gang Liu

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103009

• Abstract
• PDF (2.568 MB)
• References

Open Access

Cryo-compression and annealing hardening of 7075 aluminum alloy 03010

Hongfei Sun and Yifan Zhang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103010

• Abstract
• PDF (2.430 MB)
• References

Open Access

Study on the silicide phase control and room temperature mechanical properties of Nb-Si-Ti based alloys via B and Mg-microalloying 03011

Dezhi Chen, Fangdong Xu, Jingyue Yu, Shu Wang, Qi Wang and Ruirun Chen

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103011

• Abstract
• PDF (2.436 MB)
• References

Open Access

Effects of Cu on the microstructure and hydrogen storage properties of Mg-20Ni alloy 03012

Xin Ding, Wenchao Cao, Ruirun Chen, Jiaxin Zhang, Hongxian Shen and Jingjie Guo

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103012

• Abstract
• PDF (1.615 MB)
• References

Open Access

An integrated convolutional neural network-based surrogate model for crashworthiness performance prediction of hot-stamped vehicle panel components 03013

Haoran Li, Haosu Zhou and Nan Li

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103013

• Abstract
• PDF (1.910 MB)
• References

Open Access

Use of Multi-pass FSP treatment for improving mechanical properties and corrosion resistance of Mg-2Zn-HA composite 03014

Gaurav Kumar Sharma, Navdeep Singh Grewal and Kamal Kumar

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103014

• Abstract
• PDF (3.457 MB)
• References

Open Access

Synergistic enhancement of strength and toughness of β-Ti alloy with a fine grain: Effect of deformation temperature 03015

Yili Li, Hongze Fang, Shichen Sun, Jichang Yu and Ruirun Chen

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440103015

• Abstract
• PDF (1.640 MB)
• References

Special / Non-Traditional Manufacturing

Open Access

Enhancement of ductility of cold-deformed 316L stainless steel by electric pulse treatment 04001

Ling Xue, Ju Huang, Qiang Li, Mingxia Wu, Jian Liu and Yi Yang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440104001

• Abstract
• PDF (2.857 MB)
• References

Open Access

Improved tribological performance of TiAlSiN coated cemented carbide specimens via a pulsed magnetic field treatment 04002

Lin Zhang, Haochen Long, Mingxia Wu, Gang Yang, Yi Yang and Jian Liu

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440104002

• Abstract
• PDF (2.189 MB)
• References

Open Access

A numerical study on the influence of workpiece rotational speed on process performance in electrochemical turning operation 04003

Naisarg Sagathiya, Vyom Sharma and Janakarajan Ramkumar

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440104003

• Abstract
• PDF (2.440 MB)
• References

Open Access

Machine-learning-enhanced femtosecond-laser machining: Towards an efficient and deterministic process control 04004

Jian Gao, Wenkun Xie, Xichun Luo and Yi Qin

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440104004

• Abstract
• PDF (1.855 MB)
• References

Open Access

Influence of laser shock peening on the joint surface strength of laser cladding repair of GH4169 superalloy component 04005

Xiuquan Cheng, Sizhu Cheng, Junhao Zhang, Qinxiang Xia and Gangfeng Xiao

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440104005

• Abstract
• PDF (1.942 MB)
• References

Open Access

Research on the deformation characteristics of small module tooth during current-assisted splitting spinning of small module tooth-shaped part 04006

Haoyang Zhou, Qinxiang Xia, Chengxiu Quan and Gangfeng Xiao

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440104006

• Abstract
• PDF (2.025 MB)
• References

Open Access

Improvement in plasticity of Al-Cu-Mg alloy by electromagnetic coupling treatment 04007

Bo Zeng, Dongyan Chen, Hongfei Sun, Juan Deng, Jie Wang and Kunlan Huang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440104007

• Abstract
• PDF (1.956 MB)
• References

Open Access

Effect of the individual layer thickness and relative blanking clearance on micro-blanking for Cu/Nb multilayer composite sheets 04008

Hushan Li, Xinyuan Liu, Jingyi Wang, Zhenhai Xu, Chaogang Ding, Jie Xu, Bin Guo and Debin Shan

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440104008

• Abstract
• PDF (1.927 MB)
• References

Open Access

Investigation on multi-pass rolling process of micro-feature with complex shape 04009

Chunju Wang, Shaoxi Xue, Kaijie Lu and Lidong Cheng

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440104009

• Abstract
• PDF (2.252 MB)
• References

Open Access

Surface hardening of MIM porous metals by ultrasonic vibration assisted pressing 04010

Ryo Shimaoka, Zidong Yin and Ming Yang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440104010

• Abstract
• PDF (2.306 MB)
• References

Open Access

Hyperelastic piezoresistive nanocomposites for smart wearable applications 04011

Alejandro Triay, Nikolas Savio and Shanmugam Kumar

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440104011

• Abstract
• PDF (2.558 MB)
• References

Open Access

The influence of different sintering processes on the elemental interfaces of CoCrFeNiAl_0.5 during FAST 04012

Qiang Li, Jichang Yuan, Ling Xue, Mingxia Wu, Gang Yang and Yi Yang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440104012

• Abstract
• PDF (2.059 MB)
• References

Open Access

Field-assisted sintering of low-temperature thermoelectric material BiTeSe - sintering process and part characterisation 04013

Bo Chen, Yankang Tian, Wenlong Chang, Jie Zhao, Song Yang, Xingguo Zhou and Yi Qin

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440104013

• Abstract
• PDF (2.923 MB)
• References

Life-Cycle Analysis and Sustainable Manufacturing

Open Access

Global Local (Glocal) Supply Chains for Green Economies: An assessment of Greenhouse Gas Emissions 05001

James Gopsill, Christopher Cox and Ben Hicks

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440105001

• Abstract
• PDF (1.862 MB)
• References

Open Access

Comparative Analysis of Energy Consumption and Carbon Footprint of Additively Manufactured Solid and Lattice structure Tensile Specimens 05002

Hashim Khan, Muftooh ur Rehman Siddiqi and Sarah Junaid

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440105002

• Abstract
• PDF (1.826 MB)
• References

Open Access

Advancing Sustainable Manufacturing through Digital Twin-based Simulation: Assessing and Optimising Processes for Social, Environmental and Economic Impacts 05003

Mijoh Gbededo and Kapila Liyanage

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440105003

• Abstract
• PDF (1.897 MB)
• References

Open Access

A System Boundary Assessment of Emerging Materials: Manufacturing process of Microbial Bricks 05004

Gozde Damla Turhan-Haskara and Alptug Haskara

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440105004

• Abstract
• PDF (1.554 MB)
• References

Open Access

Large Language Model-aided Life Cycle Analysis for Circular Bio-manufacturing 05005

Gozde Damla Turhan-Haskara and Anıl Dinç Demirbilek

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440105005

• Abstract
• PDF (2.078 MB)
• References

Open Access

Eco-efficient manufacturing: Transforming end-of-life wind turbine blade components into floats for PV-floating systems 05006

Philipp Johst, Dimitrij Seibert, Willi Zschiebsch, Michael Kucher, Carlos Carneiro, Andreia Araújo, Raquel Miriam Santos, Leandro A. Rodriguez-Ortiz, Estefania Alexandra Tapia and Robert Böhm

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440105006

• Abstract
• PDF (2.231 MB)
• References

Advanced Machining and Joining

Open Access

Effect of cutting speed on the material removal behaviour for sapphire 06001

Dehui Liu, Kejin Li, Junyun Chen and Yunze Qi

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440106001

• Abstract
• PDF (1.750 MB)
• References

Open Access

Optimization of Process Parameters for Machining of Steel Molds used for Aluminum Casting in Wheel Industry 06002

Sancar Akbaşak, Tarkan Alioğulları, Büşra Karaş and Halil Tetik

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440106002

• Abstract
• PDF (1.536 MB)
• References

Open Access

Effects of cutting conditions on the cutting forces in machining additively manufactured Ti6Al4V alloy 06003

Abdulkadir Mohammed Sambo, Muhammad Younas and James Njuguna

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440106003

• Abstract
• PDF (1.820 MB)
• References

Open Access

Optimization of Rolls-Royce gas turbine components machining using artificial intelligence 06004

Sam Kemp, Mahmoud Shafik and Kapila Liyanage

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440106004

• Abstract
• PDF (2.006 MB)
• References

Open Access

Assessment of Machinability of Ti6Al4V Alloy Under Dry Conditions 06005

Muhammad Younas, Abdulkadir Mohammed Sambo, Taimoor Asim and Shahneel Saharudin

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440106005

• Abstract
• PDF (1.621 MB)
• References

Open Access

Electro-mechanical performance of double-flushed riveted joints 06006

Rui F.V. Sampaio, João P.M. Pragana, Ivo M.F. Bragança, Luis Reis, Carlos M.A. Silva and Paulo A.F. Martins

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440106006

• Abstract
• PDF (1.883 MB)
• References

Design, Virtual and Smart Engineering

Open Access

A review and framework on the aesthetic design of wearable exoskeleton 07001

Zhi Li, Hao Wu, Shan Chen, Zhiyuan Yu and Xinyi Mao

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440107001

• Abstract
• PDF (1.647 MB)
• References

Open Access

Research on the package design of longan product based on the theory of ‘locality’ 07002

Xinyi Mao, Hao Wu, Shan Chen and Zhi Li

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440107002

• Abstract
• PDF (1.714 MB)
• References

Open Access

Designing Trust in Human-Cobot Interactions: An Exploration through Experience Mapping 07003

Amy Grech, Stig McArthur and Andrew Wodehouse

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440107003

• Abstract
• PDF (1.659 MB)
• References

Open Access

Smart Cities enhancing the lives of people with disabilities 07004

Stephen Robert Pearson and Mahmoud Shafik

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440107004

• Abstract
• PDF (1.440 MB)
• References

Open Access

Designing the journey for inclusivity and accessibility in virtual manufacturing environments: An exploration through empathy 07005

Amy Grech, Scott Howie, Syed Awais Munawar, Andrew Wodehouse and Ross Brisco

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440107005

• Abstract
• PDF (1.957 MB)
• References

Open Access

I4.0/5.0 MR training: Investigating MR tools to enhance learning experiences 07006

Andrea Bondin and Joseph Paul Zammit

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440107006

• Abstract
• PDF (1.509 MB)
• References

Open Access

A study of performance characteristics of hybrid energy harvesting systems based on photovoltaics and thermoelectrics 07007

Amrutha Pattath Saseendran, Christoph Hartl, Yi Qin and Yankang Tian

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440107007

• Abstract
• PDF (1.835 MB)
• References

Sensors, Control, Robotics and Automation

Open Access

Safer and efficient assemblies: Harnessing real time worker movements with digital twins 08001

Satya Saravan Kumar Kasarapu, Gokula Vasantha, Adelaide Marzano, Jonathan Corney, Jack Hanson, John Quigley, Hanane El-Raoui, Nathan Thompson and Andrew Sherlock

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440108001

• Abstract
• PDF (1.922 MB)
• References

Open Access

Benchtop-AFP: An Exploration of Democratised Automated Fibre Placement 08002

Stig McArthur, Jörn Mehnen and Iain Bomphray

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440108002

• Abstract
• PDF (1.859 MB)
• References

Open Access

Development and characterization of acoustic energy harvesters for low power wireless sensor network 08003

Waheed Gul, Muhammad Zeeshan, Ahmad Raza Khan and Muhammad Khurram

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440108003

• Abstract
• PDF (2.686 MB)
• References

Open Access

Remote sensing mission sentinel pro: Analysis of satellite tracking, control, and health monitoring system with solar tracking capability 08004

Muhammad W. Baig and Mahmoud Shafik

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440108004

• Abstract
• PDF (2.851 MB)
• References

Open Access

Supporting manufacturing interactions through Artificial Intelligence: An appraisal of the literature 08005

Aman Kukreja, James Gopsill, Shuo Su, Aydin Nassehi and Ben Hicks

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440108005

• Abstract
• PDF (1.508 MB)
• References

Open Access

A Study on Improving Efficiency and Reliability of Automated Connector Testing for Aerospace Applications 08006

Ahmed Sarhan, Thomas Creusier, Mathieu Leray, Lancelot Martin and James Gao

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440108006

• Abstract
• PDF (1.665 MB)
• References

Open Access

Error Analysis of the plate beamsplitter in near optical coaxial phase measurement deflectometry 08007

Yanling Li, Feng Gao, Yongjia Xu, Zonghua Zhang and Xiangqian Jiang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440108007

• Abstract
• PDF (2.017 MB)
• References

Open Access

Decoding the diverse landscape of manufacturing execution systems 08008

Sam Brooks and Duncan McFarlane

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440108008

• Abstract
• PDF (2.332 MB)
• References

Open Access

An advanced product inspection and sorting system using artificial intelligence 08009

Esther Owora Adekeye, Mahmoud Shafik and Oliver Ozioko

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440108009

• Abstract
• PDF (2.048 MB)
• References

Open Access

Flexible delivery by an autonomous robot in a secure building 08010

Ahmed Sarhan, Antoine Sarrazin, Lancelot Martin and James Gao

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440108010

• Abstract
• PDF (1.768 MB)
• References

Open Access

Integrating Machine Learning with Machine Parameters to Predict Plastic Part Quality in Injection Moulding 08011

Manaf Al-Ahmad, Song Yang and Yi Qin

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440108011

• Abstract
• PDF (1.744 MB)
• References

Open Access

IoT platform for offshore wind turbine blade structure health monitoring 08012

Xingguo Zhou, Yankang Tian and Yi Qin

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440108012

• Abstract
• PDF (2.704 MB)
• References

Powder Metallurgy, Casting, Alloying, and Coating Processes

Open Access

Demonstration of a high-performance continuous casting process for cobalt alloy ASTM F75 09001

Mohamed Ahmed, Frank Omoikholo, Richard Strachan, Alireza Valizadeh, Mervyn Cooper, Brian Frame and Thomas D.A. Jones

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440109001

• Abstract
• PDF (2.305 MB)
• References

Open Access

Microstructure refinement and fracture toughness enhancement of Nb-Si based alloy by CoAl2O4 refiner coupled with ultrasound treatment 09002

Shu Wang, Weipeng Xu, Xiong Chen, Dezhi Chen, Qi Wang and Ruirun Chen

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440109002

• Abstract
• PDF (2.286 MB)
• References

Open Access

Investigation of microstructure evolution and mechanical properties of cold crucible directional solidification Nb-Si alloy 09003

Qi Wang, Qibin Wang and Ruirun Chen

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440109003

• Abstract
• PDF (2.774 MB)
• References

Open Access

P-Type BiSb₂Te₃ thin film thermoelectric module fabricated on a flexible substrate through magnetron sputtering 09004

Zhenxue Zhang, Mikdat Gurtaran, Xiaoying Li and Hanshan Dong

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440109004

• Abstract
• PDF (2.200 MB)
• References

Manufacturing / Engineering Management

Open Access

Identification of the barriers to the adoption of Circular Supply Chains in Moroccan companies: A combined qualitative analysis and Multi-Criteria Decision Model approach 10001

Salwa Assemlali and Mohamed Sabar

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440110001

• Abstract
• PDF (1.879 MB)
• References

Open Access

Development of supply chain risk mitigation framework in the digital era 10002

Sameh M Saad and Dasunika Ubeywarna

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440110002

• Abstract
• PDF (2.373 MB)
• References

Open Access

An effective MLP model for detecting malicious nodes in PoS permissionless blockchains 10003

Njoku ThankGod Anthony, Mahmoud Shafik and Hany F. Atlam

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440110003

• Abstract
• PDF (1.992 MB)
• References

Open Access

Adapting lean manufacturing principles to the footwear industry: Kaizen, Kanban or a Mix? 10004

Oluseyi A. Adeyemi, Hafiz A. Alaka, Michele Cano, Anandhu M. Nair, Esther O. Adeyemi and Oladeji O. Olanrele

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440110004

• Abstract
• PDF (1.695 MB)
• References

Open Access

Pallet drop-size optimisation and its effect on the supply chain using a cost-to-serve model 10005

Ranjika Gunathilaka, Krishna Pawar and Sameh Saad

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440110005

• Abstract
• PDF (1.994 MB)
• References

Open Access

Digital Twin Framework for Solar Power Plants in Kazakhstan 10006

Gani Kazbek, Shyndaulet Kassymkhanov, Yerassyl Alipov, Nurbek Meiirbekov, Altay Zhakatayev and Essam Shehab

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440110006

• Abstract
• PDF (1.857 MB)
• References

Open Access

Examining the role of production and purchasing supply chain management using PLS-SEM approach in the UK textile industry 10007

Samina Komal and Sameh M Saad

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440110007

• Abstract
• PDF (1.493 MB)
• References

Open Access

Leveraging generative AI for knowledge-driven information retrieval in the energy sector 10008

Ali Alsayegh and Tariq Masood

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440110008

• Abstract
• PDF (1.581 MB)
• References

Open Access

Industrial large model: A survey 10009

Jiehan Zhou, Yang Cao, Quanbo Lu, Yan Zhang, Cong Liu, Shouhua Zhang and Junsuo Qu

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440110009

• Abstract
• PDF (2.247 MB)
• References

Open Access

Utilising Digital Twins for Smart Maintenance Planning of Fuel Cell in Electric Vehicles 10010

Nasser Amaitik, Ming Zhang, Yuchun Xu, Tony Clark and Lucy Bastin

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440110010

• Abstract
• PDF (2.312 MB)
• References

Open Access

A cloud infrastructure for enabling provision of the Material Testing as a Service (MTaaS) 10011

Song Yang, Manaf Al-Ahmad and Yi Qin

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440110011

• Abstract
• PDF (2.799 MB)
• References

Open Access

Evaluating the impact of GSCM practices on Organisational performance for SMEs in Vietnam 10012

Sameh Saad, Mohamed Khamkham and Quang Duong Nguyen

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440110012

• Abstract
• PDF (1.464 MB)
• References

Open Access

Value retention using remanufacturing: A case study on part and process down selection for wind turbine applications 10013

Kedarnath Rane, Ashfaq Mohammad, Peter Fox, Hiba Ayaz, Gabriel McKeown, Carol Sheath, Sampan Seth, Andreas Reimer and Stephen Fitzpatrick

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440110013

• Abstract
• PDF (1.652 MB)
• References

Advancements in Manufacturing Lightweight Structures

Open Access

Design of TPMS-based Uniform and Hybrid Graded Lattice Structures: A Fluid Flow Analysis 11001

Rajkumar, Janakarajan Ramkumar and Kantesh Balani

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440111001

• Abstract
• PDF (2.352 MB)
• References

Open Access

Finite element analysis of drilling-induced damage responses on FRP hybrid bio/composite laminates 11002

Sikiru O. Ismail and Harshith Chandru

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440111002

• Abstract
• PDF (1.843 MB)
• References

Open Access

Design and fabrication of prototypes with modified materials for race & automotive applications 11003

Dionisis Semitekolos, Andreia Araujo, Raquel M. Santos, C. Pernechele, F. Panozzo, L. Vescovi and Costas Charitidis

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440111003

• Abstract
• PDF (1.610 MB)
• References

Open Access

The polymer melt swelling behavior in micro-extrusion process for preparation of continuous carbon fiber reinforced PP prepreg filament 11004

Kui Liu

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440111004

• Abstract
• PDF (2.962 MB)
• References

Open Access

Twinning the future: Implementing digital twin technology in the optimisation of fibre-reinforced polymers 11005

Abdalrahman Alajmi

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440111005

• Abstract
• PDF (1.791 MB)
• References

Open Access

Characterisation of Bio composites for Bio-Manufacturing: Jute-reinforced Bacterial Cellulose for Construction 11006

Gozde Damla Turhan-Haskara

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440111006

• Abstract
• PDF (2.273 MB)
• References

Robotics and Autonomous Systems for Advanced Manufacturing

Open Access

Sustainable by Design: Advancing Hydrogen Fuel Cell Production through Automation 12001

Carmelo Mineo, Ignazio Infantino, Orazio Barbera, Giosuè Giacoppo and Nicola Montinaro

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440112001

• Abstract
• PDF (2.182 MB)
• References

Open Access

A novel non-intrusive mental workload evaluation concept in human-robot collaboration 12002

Baixiang Zhao, Xiu-tian Yan and Jörn Mehnen

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440112002

• Abstract
• PDF (1.652 MB)
• References

Open Access

DSIL4IMR: A dual step-based initial localization method for industrial mobile robot 12003

Wenguang Li, Jishun Ou, Jiying Ren, Panling Huang, Haibo Fang, Lu Han, Jiehan Zhou and Jun Zhou

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440112003

• Abstract
• PDF (1.629 MB)
• References

Open Access

Predictive machine learning-based error correction in GPS/IMU localization to improve navigation of autonomous vehicles 12004

Uchenna Charles Onyema and Mahmoud Shafik

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440112004

• Abstract
• PDF (2.827 MB)
• References

Open Access

An overview of cobots for advanced manufacturing: Human-robot interactions and research trends 12005

Mohamed Khedr and and Erfu Yang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440112005

• Abstract
• PDF (1.826 MB)
• References

Open Access

Enhancing robotics learning using imitation learning through visual-based behaviour cloning 12006

Yagna Jadeja, Mahmoud Shafik, Paul Wood and Aaisha Makkar

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440112006

• Abstract
• PDF (2.173 MB)
• References

Digital / Smart Manufacturing, and Industry 4.0

Open Access

Leveraging industry 4.0 techniques for predictive equipment maintenance: From concept to commissioning 13001

Andrea Bondin and Joseph Paul Zammit

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440113001

• Abstract
• PDF (1.501 MB)
• References

Open Access

Validation of a digital twin: Part distortion in heat treatment 13002

Sarini Jayasinghe, Kareema Hilton and Jörn Mehnen

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440113002

• Abstract
• PDF (2.104 MB)
• References

Open Access

Integrating multiscale data for digital twin-enhanced manufacturing systems: A conceptual and case demonstration 13003

Yujia Luo and Peter Ball

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440113003

• Abstract
• PDF (2.144 MB)
• References

Open Access

A Fingerprint Approach for Computationally Efficient Digital Twins of Precision Manufacturing Processes 13004

Abhilash Puthanveettil Madathil, Xichun Luo, Qi Liu, Rajeshkumar Madarkar and Charles Walker

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440113004

• Abstract
• PDF (2.150 MB)
• References

Open Access

Novel calibration technique for hybrid structured-light three-dimensional measurement system 13005

Yongjia Xu, Feng Gao, Yan Ling and Xiangqian Jiang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440113005

• Abstract
• PDF (2.224 MB)
• References

Open Access

Prospects of Digital Twin for Dynamic Life Cycle Assessment of Smart Manufacturing Systems 13006

Rajeshkumar Madarkar, Xichun Luo, Charles Walker, Abhilash Puthanveettil Madathil and Qi Liu

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440113006

• Abstract
• PDF (1.514 MB)
• References

Open Access

Development of an on-machine surface measurement system for an ultra-precision five-axis machine 13007

Wenbin Zhong, Wenhan Zeng, Guoyu Yu and Xiangqian Jiang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440113007

• Abstract
• PDF (2.398 MB)
• References

Open Access

Contact-based pose detection method for small components to optimise the digital twin-driven robotic assembly process 13008

Bilal Nazeer, Kun Qian, Patricia A. Vargas, Mustafa S. Erden and Kong Xianwen

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440113008

• Abstract
• PDF (2.300 MB)
• References

Open Access

A digital twin-driven ultra-precision machining system 13009

Charlie Walker, Abhilash Puthanveettil Madathil, Xichun Luo, Rajeshkumar Madarkar and Qi Liu

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440113009

• Abstract
• PDF (1.688 MB)
• References

EU M2DESCO Project Special-Session Papers

Open Access

Computational Multi-Models Enabled Design of Safe & Sustainable Multi-Component High-Entropy Coatings 14001

Gonzalo G. Fuentes, Yi Qin, Hanshan Dong, Matteo Fasano, Costas Charitidis, Radu Piticescu, Elias P. Koumoulos, Nikos Mekras, Stephane Lucas, Sergio Durante et al. (2 more)

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440114001

• Abstract
• PDF (3.135 MB)
• References

Open Access

High entropy alloys and methods for synthesis 14002

Laurentiu Florin Mosinoiu, Ioana -Cristina Badea, Anca Elena Sobetkii, Ioana Anasiei, Mirela Petriceanu, Dumitru Mitrica and Radu- Robert Piticescu

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440114002

• Abstract
• PDF (1.613 MB)
• References

Open Access

Exploring new pathways to enhance high entropy alloys properties 14003

Beatrice – Adriana Șerban, Laura – Mădălina Cursaru, Ioana – Cristina Badea, Radu Robert Piticescu and Alexander Pogrebnjak

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440114003

• Abstract
• PDF (1.383 MB)
• References

Open Access

Neuro – symbolic AI for materials modelling and processes design 14004

Nikolaos Mekras, Electra Mekra and Christos Georgiou

Published online: 27 August 2024

DOI: https://doi.org/10.1051/matecconf/202440114004

• Abstract
• PDF (1.476 MB)
• References