Open Access
Issue |
MATEC Web Conf.
Volume 401, 2024
21st International Conference on Manufacturing Research (ICMR2024)
|
|
---|---|---|
Article Number | 02011 | |
Number of page(s) | 10 | |
Section | Additive Manufacturing | |
DOI | https://doi.org/10.1051/matecconf/202440102011 | |
Published online | 27 August 2024 |
- J. Zhu, H. Zhou, C. Wang, L. Zhou, S. Yuan, and W. Zhang, Chinese Journal of Aeronautics, vol. 34, no. 1, pp. 91-110, (2021) [CrossRef] [Google Scholar]
- C. Emmelmann, D. Herzog, and J. Kranz, in Laser additive manufacturing, pp. 259-279 (Elsevier, 2017) [CrossRef] [Google Scholar]
- L. Yan, Y. Chen, and F. Liou, Additive Manufacturing, vol. 31, p. 100901, (2020) [CrossRef] [Google Scholar]
- A. D. Goodall, L. Chechik, R. L. Mitchell, G. W. Jewell, and I. Todd, Additive Manufacturing, vol. 70, p. 103555, (2023) [CrossRef] [Google Scholar]
- G. Stornelli et al., Materials, vol. 14, no. 6, p. 1489, (2021) [CrossRef] [Google Scholar]
- R. Singh, P. Lee, R. Dashwood, and T. Lindley, Materials Technology, vol. 25, no. 3-4, pp. 127-136, (2010) [CrossRef] [Google Scholar]
- C. Mikler et al., Jom, vol. 69, pp. 532-543, (2017) [CrossRef] [Google Scholar]
- B. Zhang, N.-E. Fenineche, L. Zhu, H. Liao, and C. Coddet, Journal of Magnetism and Magnetic Materials, vol. 324, no. 4, pp. 495-500, (2012) [CrossRef] [Google Scholar]
- A. Mazeeva, M. Staritsyn, V. Bobyr, S. Manninen, P. Kuznetsov, and V. Klimov, Journal of Alloys and Compounds, vol. 814, p. 152315, (2020) [CrossRef] [Google Scholar]
- T. Riipinen, S. Metsä-Kortelainen, T. Lindroos, J. S. Keränen, A. Manninen, and J. Pippuri-Mäkeläinen, Rapid Prototyping Journal, vol. 699, p. 707, (2019) [Google Scholar]
- X. Yang et al., Journal of Physics and Chemistry of Solids, vol. 130, pp. 210-216, (2019) [CrossRef] [Google Scholar]
- P. Beckley and G. K. Sujan, in Reference Module in Materials Science and Materials Engineering (Elsevier, 2016) [Google Scholar]
- A. D. Goodall, L. Chechik, F. Livera, and I. Todd, Acta Materialia, vol. 263, p. 119501, (2024) [CrossRef] [Google Scholar]
- A. Z. Macknojia et al., Materials & Design, p. 112883, (2024) [Google Scholar]
- M. Garibaldi, C. Gerada, and R. Hague, University of Nottingham, (2018) [Google Scholar]
- H. Tiismus, A. Kallaste, A. Rassõlkin, and T. Vaimann, Key Engineering Materials, vol. 799, pp. 270-275, (2019). [CrossRef] [Google Scholar]
- M. Garibaldi, I. Ashcroft, N. Hillier, S. Harmon, and R. Hague, Materials Characterization, vol. 143, pp. 144-151, (2018) [CrossRef] [Google Scholar]
- M. Garibaldi, I. Ashcroft, J. Lemke, M. Simonelli, and R. Hague, Scripta Materialia, vol. 142, pp. 121-125, (2018) [CrossRef] [Google Scholar]
- M. Garibaldi, I. Ashcroft, M. Simonelli, and R. Hague, Acta Materialia, vol. 110, pp. 207-216, (2016) [CrossRef] [Google Scholar]
- G. Ouyang, X. Chen, Y. Liang, C. Macziewski, and J. Cui, Journal of Magnetism and Magnetic Materials, vol. 481, pp. 234-250, (2019) [CrossRef] [Google Scholar]
- M. Garibaldi, C. Gerada, I. Ashcroft, R. Hague, and H. Morvan, in MEA2015 More Electric Aircraft, (2015) [Google Scholar]
- C. L. Cramer et al., Heliyon, vol. 5, no. 11, (2019) [Google Scholar]
- R. M. Mahamood, Laser metal deposition process of metals, alloys, and composite materials. (Springer, 2018) [CrossRef] [Google Scholar]
- P. Sreeramagiri, H. Alrehaili, X. Wu, G. Dinda, and G. Balasubramanian, Journal of Materials Research and Technology, vol. 19, pp. 1090-1101, (2022) [CrossRef] [Google Scholar]
- N. Sanaei and A. Fatemi, Progress in Materials Science, vol. 117, p. 100724, (2021) [CrossRef] [Google Scholar]
- G. Ouyang, X. Chen, Y. Liang, C. Macziewski, and J. Cui, Journal of Magnetism and Magnetic Materials, vol. 481, pp. 234-250, (2019) [CrossRef] [Google Scholar]
- Y. Ustinovshikov and I. Sapegina, Journal of materials science, vol. 39, pp. 1007-1016, (2004) [CrossRef] [Google Scholar]
- L. Thijs, F. Verhaeghe, T. Craeghs, J. V. Humbeeck, and J.-P. Kruth, Acta Materialia, vol. 58, no. 9, pp. 3303-3312, (2010) [CrossRef] [Google Scholar]
- G. K. Ng, G. Bi, K. M. Teh, and H. Zheng, in International Congress on Applications of Lasers & Electro-Optics, 2008, vol. 2008, no. 1: Laser Institute of America, p. 105 (2008) [Google Scholar]
- L. E. dos Santos Paes, M. Pereira, F. A. Xavier, W. L. Weingaertner, and L. O. Vilarinho, Journal of Manufacturing Processes, vol. 73, pp. 67-77, (2022) [CrossRef] [Google Scholar]
- S. Li, S. Zhang, T. G. Habetler, and R. G. Harley, IEEE Transactions on Industry Applications, vol. 55, no. 3, pp. 2660-2681, (2019) [CrossRef] [Google Scholar]
- N. T. Aboulkhair, N. M. Everitt, I. Ashcroft, and C. Tuck, Additive Manufacturing, vol. 1-4, pp. 77-86, (2014) [CrossRef] [Google Scholar]
- C. Zhong, T. Biermann, A. Gasser, and R. Poprawe, Journal of Laser Applications, vol. 27, no. 4, (2015) [Google Scholar]
- M. Qu et al., Nature communications, vol. 13, no. 1, p. 1079, (2022) [CrossRef] [Google Scholar]
- T. F. Babuska et al., Acta Materialia, vol. 180, pp. 149-157, (2019) [CrossRef] [Google Scholar]
- L. N. Carter, K. Essa, and M. M. Attallah, Rapid Prototyping Journal, vol. 21, no. 4, pp. 423-432, (2015) [CrossRef] [Google Scholar]
- J. Chen, X. Lin, T. Wang, H. Yang, and W. Huang, Xiyou Jinshu Cailiao yu Gongcheng(Rare Metal Materials and Engineering), vol. 32, no. 3, pp. 183-186, (2003) [Google Scholar]
- L. Gargalis, University of Nottingham, 2021. [Google Scholar]
- R. Zhang, R. Dou, Z. Wen, and X. Liu, International Journal of Heat and Mass Transfer, vol. 125, pp. 780-787, (2018) [CrossRef] [Google Scholar]
- R. J. Moat, A. J. Pinkerton, L. Li, P. J. Withers, and M. Preuss, Materials Science and Engineering: A, vol. 528, no. 6, pp. 2288-2298, (2011) [CrossRef] [Google Scholar]
- L. He, Z. Yuan, W. Shi, and X. Qu, Journal of Theoretical and Applied Mechanics, vol. 60, (2022) [Google Scholar]
- Y. INOKUTI, S. IKEDA, and Y. ITO, Transactions of the Iron and Steel Institute of Japan, vol. 25, no. 3, pp. 228-232, (1985) [CrossRef] [Google Scholar]
- Z. Zhao, R. Song, Y. Wang, Y. Zhang, C. Hu, and Y. Wang, Engineering Failure Analysis, vol. 127, p. 105573, (2021) [CrossRef] [Google Scholar]
- A. Andreiev et al., Journal of Materials Processing Technology, vol. 317, p. 117991, (2023) [CrossRef] [Google Scholar]
- A. E. Pilehrood, A. Mashhuriazar, A. H. Baghdadi, Z. Sajuri, and H. Omidvar, Materials, vol. 14, no. 19, p. 5662, (2021) [CrossRef] [Google Scholar]
- S. Ball, M. Ghayoor, S. Pasebani, and A. Tabei, Procedia Manufacturing, vol. 53, pp. 343-347, (2021) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.