EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 401 (2024) MATEC Web Conf., 401 (2024) 06005 References
Open Access
Issue
MATEC Web Conf.
Volume 401, 2024
21st International Conference on Manufacturing Research (ICMR2024)
Article Number 06005
Number of page(s) 6
Section Advanced Machining and Joining
DOI https://doi.org/10.1051/matecconf/202440106005
Published online 27 August 2024
  1. G. Y. Zhao, Z. Y. Liu, Y. He, H. J. Cao, and Y. B. Guo, Energy consumption in machining: Classification, prediction, and reduction strategy, Energy 133, 142–157 (2017) [CrossRef] [Google Scholar]
  2. A. Hosseini and H. A. Kishawy, Cutting Tool Materials and Tool Wear, pp. 31–56. (2014) doi: 10.1007/978-3-662- 43902-9_2. [Google Scholar]
  3. Y. W. Seo, M. Ramulu, and D. Kim, Machinability of titanium alloy (Ti-6Al-4V) by abrasive waterjets, Proc Inst Mech Eng B J Eng Manuf, 217, no. 12, pp. 1709–1721, (2003), doi: 10.1243/095440503772680631. [CrossRef] [Google Scholar]
  4. S. Pervaiz, I. Deiab, and B. Darras, Power consumption and tool wear assessment when machining titanium alloys, International Journal of Precision Engineering and Manufacturing, 14, no. 6, pp. 925–936, Jun. (2013), doi: 10.1007/s12541-013-0122-y. [CrossRef] [Google Scholar]
  5. M. Nouari and H. Makich, On the Physics of Machining Titanium Alloys: Interactions between Cutting Parameters, Microstructure and Tool Wear, Metals (Basel), 4, no. 3, pp. 335–358 (2014), doi: 10.3390/met4030335. [CrossRef] [Google Scholar]
  6. F. Shah, M. Younas, M. Khan, A. Khan, Z. Khan, and N. Khan, Mechanical properties and weld characteristics of friction stir welding of thermoplastics using heat-assisted tool, Welding in the World, 67, no. 2, pp. 309–323, (2023) [CrossRef] [Google Scholar]
  7. Z. Khan, M. Khan, S. H. Imran Jaffery, M. Younas, K. S. Afaq, and M. A. Khan, Numerical and experimental investigation of the effect of process parameters on sheet deformation during the electromagnetic forming of AA6061- T6 alloy, Mechanical Sciences, 11, no. 2, pp. 329–347, Oct. (2020), doi: 10.5194/MS-11-329-2020. [CrossRef] [Google Scholar]
  8. Z. Khan et al., Dynamic Analysis of Closed Die Electromagnetic Sheet Metal Forming to Predict Deformation and Failure of AA6061-T6 Alloy Using a Fully Coupled Finite Element Model, Materials, 15, no. 22, p. 7997, (2022) [CrossRef] [Google Scholar]
  9. M. Younas et al., Multi-objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP), The International Journal of Advanced Manufacturing Technology, 105, pp. 1175–1188, (2019) [CrossRef] [Google Scholar]
  10. M. Younas, S. H. I. Jaffery, A. Khan, and M. Khan, Development and analysis of tool wear and energy consumption maps for turning of titanium alloy (Ti6Al4V), J Manuf Process, 62, pp. 613–622, (2021) doi: 10.1016/j.jmapro.2020.12.060. [CrossRef] [Google Scholar]
  11. I. Tlhabadira, I. A. Daniyan, L. Masu, and K. Mpofu, Development of a model for the optimization of energy consumption during the milling operation of titanium alloy (Ti6Al4V), in Materials Today: Proceedings, Elsevier Ltd, Jan. 2021, pp. 614–620. (2021) doi: 10.1016/j.matpr.2020.03.477. [Google Scholar]
  12. S. Pervaiz, I. Deiab, and C. Mihai Nicolescu, Energy Consumption and Surface Finish Analysis of Machining Ti6Al4V. [Online]. Available: https://www.researchgate.net/publication/266731984 [Google Scholar]
  13. H. Akkuş and H. Yaka, Experimental and statistical investigation of the effect of cutting parameters on surface roughness, vibration and energy consumption in machining of titanium 6Al-4V ELI (grade 5) alloy, Measurement (Lond), 167 (2021) doi: 10.1016/j.measurement.2020.108465. [Google Scholar]
  14. J. I. Hughes, A. R. C. Sharman, and K. Ridgway, The effect of cutting tool material and edge geometry on tool life and workpiece surface integrity, Proc Inst Mech Eng B J Eng Manuf, 220, pp. 93–107, (2006), doi: 10.1243/095440506X78192. [CrossRef] [Google Scholar]
  15. M. Younas , Process Parameters and Its Effect on Surface Roughness During Turning Ti6Al4V Alloy, in Advances in Manufacturing Technology XXXIII: Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, 10-12 September 2019, Queen’s University, Belfast, (2019) [Google Scholar]
  16. S. H. I. Jaffery, M. Younas, M. Khan, and L. Ali, Energy Consumption Analysis in Turning Ti-6Al-4V alloy, in 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT), (2020) [Google Scholar]
  17. M. Khan, S. S. Warsi, S. H. I. Jaffery, R. Ahmad, and M. Younas, Analysis of Energy Consumption in Orthogonal Machining of Al 6061-T6 Alloy, in Advances in Manufacturing Technology XXXIII: Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, 10-12 September 2019, Queen’s University, Belfast (2019) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.