Open Access
| Issue |
MATEC Web Conf.
Volume 401, 2024
21st International Conference on Manufacturing Research (ICMR2024)
|
|
|---|---|---|
| Article Number | 06003 | |
| Number of page(s) | 7 | |
| Section | Advanced Machining and Joining | |
| DOI | https://doi.org/10.1051/matecconf/202440106003 | |
| Published online | 27 August 2024 | |
- T. J. Horn and O. L. A. Harrysson, “Overview of current additive manufacturing technologies and selected applications,” Sci Prog, vol. 95, no. 3, pp. 255–282, 2012, doi: 10.3184/003685012X13420984463047. [CrossRef] [Google Scholar]
- G. Chen, C. Ren, W. Yu, X. Yang, and L. Zhang, “Application of genetic algorithms for optimizing the Johnson–Cook constitutive model parameters when simulating the titanium alloy Ti-6Al-4V machining process,” Proc Inst Mech Eng B J Eng Manuf, vol. 226, no. 8, pp. 1287–1297, Aug. 2012. [CrossRef] [Google Scholar]
- A. Hosseini and H. A. Kishawy, “Cutting Tool Materials and Tool Wear,” 2014, pp. 31–56. doi: 10.1007/978-3-662-43902-9_2. [Google Scholar]
- M. K. Muhammad Younas Syed Husain Imran, “Process Parameters and Its Effect on Surface Roughness During Turning Ti6Al4V Alloy,” in Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, 10- 12 September 2019, Queen’s University, Belfast, IOS Press, 2019, p. 303. [Google Scholar]
- B. Dutta and F. H. (Sam) Froes, “The Additive Manufacturing (AM) of titanium alloys,” Metal Powder Report, vol. 72, no. 2, pp. 96–106, 2017, doi: 10.1016/j.mprp.2016.12.062. [CrossRef] [Google Scholar]
- M. Younas, S. H. I. Jaffery, A. Khan, and M. Khan, “Development and analysis of tool wear and energy consumption maps for turning of titanium alloy (Ti6Al4V),” J Manuf Process, vol. 62, pp. 613–622, 2021, doi: 10.1016/j.jmapro.2020.12.060. [CrossRef] [Google Scholar]
- A. Polishetty, M. Shunmugavel, M. Goldberg, G. Littlefair, and R. K. Singh, “Cutting Force and Surface Finish Analysis of Machining Additive Manufactured Titanium Alloy Ti-6Al-4V,” Procedia Manuf, vol. 7, pp. 284–289, 2017, doi: 10.1016/j.promfg.2016.12.071. [CrossRef] [Google Scholar]
- M. Younas et al., “Tool Wear Progression and its Effect on Energy Consumption in Turning of Titanium Alloy (Ti-6Al-4V),” Mechanical Sciences, vol. 10, no. 2, pp. 373–382, 2019, doi: 10.5194/ms-10-373-2019. [CrossRef] [Google Scholar]
- M. Calamaz, D. Coupard, M. Nouari, and F. Girot, “Numerical analysis of chip formation and shear localisation processes in machining the Ti-6Al-4V titanium alloy,” International Journal of Advanced Manufacturing Technology, vol. 52, no. 9–12, pp. 887–895, Feb. 2011, doi: 10.1007/s00170-010-2789-x. [CrossRef] [Google Scholar]
- Z. Khan, M. Khan, M. Younas, A. S. Danish, A. Khan, and F. Djavanroodi, “Multi-objective parametric optimization of driver-based electromagnetic sheet metal forming of SS304 using AA6061-T6 driver,” Mechanics of Advanced Materials and Structures, pp. 1–14, doi: 10.1080/15376494.2023.2235344. [Google Scholar]
- F. Shah, M. Younas, M. Khan, A. Khan, Z. Khan, and N. Khan, “Mechanical properties and weld characteristics of friction stir welding of thermoplastics using heat-assisted tool,” Welding in the World, vol. 67, no. 2, pp. 309–323, 2023, doi: 10.1007/s40194-022-01385-3. [CrossRef] [Google Scholar]
- M. Younas et al., “Multi-objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP),” International Journal of Advanced Manufacturing Technology, vol. 105, no. 1–4, pp. 1175–1188, 2019, doi: 10.1007/s00170-019-04299-5. [CrossRef] [Google Scholar]
- S. Pervaiz, I. Deiab, and B. Darras, “Power consumption and tool wear assessment when machining titanium alloys,” International Journal of Precision Engineering and Manufacturing, vol. 14, no. 6, pp. 925–936, Jun. 2013, [CrossRef] [Google Scholar]
- S. H. I. Jaffery, M. Younas, M. Khan, and L. Ali, “Energy Consumption Analysis in Turning Ti-6Al-4V alloy,” in 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT), 2020, pp. 18–21. doi: 10.1109/ICMIMT49010.2020.9041194. [Google Scholar]
- M. Khan, S. S. Warsi, S. H. I. Jaffery, R. Ahmad, and M. Younas, “Analysis of Energy Consumption in Orthogonal Machining of Al 6061-T6 Alloy,” in Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, 10- 12 September 2019, Queen’s University, Belfast, IOS Press, 2019, p. 327. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.