Open Access
| Issue |
MATEC Web Conf.
Volume 401, 2024
21st International Conference on Manufacturing Research (ICMR2024)
|
|
|---|---|---|
| Article Number | 03007 | |
| Number of page(s) | 6 | |
| Section | Advanced Materials, Processes and Analysis | |
| DOI | https://doi.org/10.1051/matecconf/202440103007 | |
| Published online | 27 August 2024 | |
- LIU Dehua, WU Dongjiang, WANG Ru-zheng, et al. Formation mechanism of Al-Zn-Mg- Cu alloy fabricated by laser-arc hybrid additive manufacturing: microstructure evaluation and mechanical properties[J]. Additive Manufacturing, 2022,50:102554. [CrossRef] [Google Scholar]
- YUAN Tao, REN Xuelei, CHEN Shujun, et al. Grain refinement and property improvements of Al-Zn-Mg-Cu alloy by heterogeneous particle addition during wire and arc additive manufacturing[J]. Journal of Materials Re-search and Technology, 2022,16:824-839. [CrossRef] [Google Scholar]
- JIN Peng, LIU Yibo, SUN Qingjie. Evolu-tion of crystallographic orientation, columnar to equiaxed transformation and mechanical properties realized by adding TiCps in wire and arc additive manufacturing 2219 aluminum alloy[J]. Additive Manufacturing, 2021,39:101878. [CrossRef] [Google Scholar]
- CAI Xiaoyu, DONG Bolun, BAI Jiuyang, et al. Effects of post-deposition heat treatment on microstructures of GTA-additive manufactured 2219-Al[J]. Science and Technology of Welding and Joining, 2019,24(5):474-483. [CrossRef] [Google Scholar]
- PAUL A Colegrove, HARRY E Coules, JULIAN Fairman, et al. Microstructure and residual stress improvement in wire and arc additively manufactured parts through high- pressure rolling[J]. Journal of Materials Processing Technology, 2013,213(10):1782-1791. [CrossRef] [Google Scholar]
- GU Jianglong, DING Jialuo, STEWART W Williams, et al. The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al-6.3Cu alloy[J]. Materials Science and Engineering: A, 2016,651:18-26. [CrossRef] [Google Scholar]
- FANG Xuewei, ZHANG Lijuan, CHEN Guopeng, et al. Microstructure evolution of wire- arc additively manufactured 2319 aluminum alloy with interlayer hammering[J]. Materials Science and Engineering, A. Structural Materials: Properties, Misrostructure and Processing, 2021,800:140168. [CrossRef] [Google Scholar]
- FU Youheng, ZHANG Haiou, WANG Guilan, et al. Investigation of mechanical properties for hybrid deposition and micro-rolling of bainite steel[J]. Journal of Materials Processing Technology, 2017,250:220-227. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.