Open Access
| Issue |
MATEC Web Conf.
Volume 401, 2024
21st International Conference on Manufacturing Research (ICMR2024)
|
|
|---|---|---|
| Article Number | 06002 | |
| Number of page(s) | 6 | |
| Section | Advanced Machining and Joining | |
| DOI | https://doi.org/10.1051/matecconf/202440106002 | |
| Published online | 27 August 2024 | |
- M. Oytaç, “Türkiye jant sanayii ve jant sanayiinde kullanılan kalıp çelikleri üzerine bir araştırma”, masterThesis, Fen Bilimleri Enstitüsü, 2018. Erişim: 26 Mart 2024. [Çevrimiçi]. Erişim adresi: https://acikbilim.yok.gov.tr/handle/20.500.12812/411341 [Google Scholar]
- B. Zhang, D. M. Maijer, ve S. L. Cockcroft, “Development of a 3-D thermal model of the low-pressure die-cast (LPDC) process of A356 aluminum alloy wheels”, Materials Science and Engineering: A, c. 464, sy 1, ss. 295-305, Ağu. 2007, doi: 10.1016/j.msea.2007.02.018. [CrossRef] [Google Scholar]
- I. N. Fridlyander, V. G. Sister, O. E. Grushko, V. V. Berstenev, L. M. Sheveleva, ve L. A. Ivanova, “Aluminum Alloys: Promising Materials in the Automotive Industry”, Metal Science and Heat Treatment, c. 44, sy 9, ss. 365-370, Eyl. 2002, doi: 10.1023/A:1021901715578. [Google Scholar]
- B. Kosec, “Failures of dies for die-casting of aluminium alloys”, Metalurgija, c. 47, sy 1, ss. 51-55, Oca. 2008. [Google Scholar]
- Y. K. Woon ve K. S. Lee, “Development of a die design system for die casting”, Int J Adv Manuf Technol, c. 23, sy 5, ss. 399-411, Mar. 2004, doi: 10.1007/s00170-003- 1754-3. [CrossRef] [Google Scholar]
- P. Gümpel, T. Bogatzky, A. Huber, ve B. Geigges, “Comparison of different characteristics of modern hot-work tool steels”, içinde Proceedings of the 6th International Tooling Conference, 2002. Erişim: 27 Mart 2024. [Çevrimiçi]. Erişim adresi: https://www5.kau.se/sites/default/files/Dokument/subpage/2010/02/1_3_16_pdf_14114.pdf [Google Scholar]
- A. K. CAKIR, “INVESTIGATION of the CORRELATION BETWEEN POWER CONSUMPTION and SURFACE ROUGHNESS in the TURNING of HARDENED DIN 1.2367 STEEL”, Journal of Scientific Reports-A, sy 050, ss. 291-309, 2022. [Google Scholar]
- M. N. P. Sastry, K. D. Devi, ve K. M. Reddy, “Analysis and optimization of machining process parameters using design of experiments”, Industrial Engineering Letters, c. 2, sy 9, ss. 23-32, 2012. [Google Scholar]
- V. P. Astakhov, “Design of Experiment Methods in Manufacturing: Basics and Practical Applications”, içinde Statistical and Computational Techniques in Manufacturing, J. P. Davim, Ed., Berlin, Heidelberg: Springer Berlin Heidelberg, 2012, ss. 1-54. doi: 10.1007/978-3-642-25859-6_1. [Google Scholar]
- R. S. Rao, C. G. Kumar, R. S. Prakasham, ve P. J. Hobbs, “The Taguchi methodology as a statistical tool for biotechnological applications: A critical appraisal”, Biotechnology Journal, c. 3, sy 4, ss. 510-523, Nis. 2008, doi: 10.1002/biot.200700201. [CrossRef] [Google Scholar]
- M. Moayyedian, A. Mohajer, M. G. Kazemian, A. Mamedov, ve J. F. Derakhshandeh, “Surface roughness analysis in milling machining using design of experiment”, SN Appl. Sci., c. 2, sy 10, s. 1698, Eki. 2020, doi: 10.1007/s42452-020-03485-5. [Google Scholar]
- B. M. Gopalsamy, B. Mondal, ve S. Ghosh, “Taguchi method and ANOVA: An approach for process parameters optimization of hard machining while machining hardened steel”, c. 68, 2009. [Google Scholar]
- D. K. Chauhan ve K. K. Chauhan, “Optimization of machining parameters of titanium alloy for tool life”, Journal of Engineering Computers & Applied Sciences, c. 2, sy 6, ss. 57-65, 2013. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.