Open Access
Issue |
MATEC Web Conf.
Volume 401, 2024
21st International Conference on Manufacturing Research (ICMR2024)
|
|
---|---|---|
Article Number | 02013 | |
Number of page(s) | 6 | |
Section | Additive Manufacturing | |
DOI | https://doi.org/10.1051/matecconf/202440102013 | |
Published online | 27 August 2024 |
- Y. Giroux, The Life Cycle Cost of the Canadian Surface Combatants, (2022) [Google Scholar]
- G. Sun, Z. Wang, Y. Lu, M. Chen, K. Yang, Z. Ni, Underwater Laser Welding/Cladding for High-performance Repair of Marine Metal Materials: A Review, Chinese Journal of Mechanical Engineering (English Edition). 35 (2022). https://doi.org/10.1186/s10033-021-00674-0. [Google Scholar]
- T. HINO, M. TAMURA, Y. TANAKA, W. KOUNO, Y. MAKINO, S. KAWANO, K. MATSUNAGA, Development of Underwater Laser Cladding and Underwater Laser Seal Welding Techniques for Reactor Components, Journal of Power and Energy Systems. 3 51–59 (2009). https://doi.org/10.1299/jpes.3.51. [CrossRef] [Google Scholar]
- N. Guo, X. Xing, H. Zhao, C. Tan, J. Feng, Z. Deng, Effect of water depth on weld quality and welding process in underwater fiber laser welding, Mater Des. 115, 112–120 (2017). https://doi.org/10.1016/j.matdes.2016.11.044. [CrossRef] [Google Scholar]
- N. Guo, Y. Fu, X. Xing, Y. Liu, S. Zhao, J. Feng, Underwater local dry cavity laser welding of 304 stainless steel, J Mater Process Technol. 260, 146–155 (2018) https://doi.org/10.1016/j.jmatprotec.2018.05.025. [CrossRef] [Google Scholar]
- Levy, N.; Simon-Blecher, N.; Ben-Ezra, S.; Yuval, M.; Doniger, T.; Leray, M.; Karako-Lampert, S.; Tarazi, E.; Levy, O. Evaluating Biodiversity for Coral Reef Reformation and Monitoring on Complex 3D Structures Using Environmental DNA (EDNA) Metabarcoding. Sci. Total Environ., 856, 159051 (2023) [CrossRef] [Google Scholar]
- Wang, Y.; Qiu, L.C.; Chen, S.G.; Liu, Y. 3D Concrete Printing in Air and under Water: A Comparative Study on the Buildability and Interlayer Adhesion. Constr. Build. Mater, 411, 134403 (2024) [CrossRef] [Google Scholar]
- Ly, O.; Yoris-Nobile, A.I.; Sebaibi, N.; Blanco-Fernandez, E.; Boutouil, M.; Castro-Fresno, D.; Hall, A.E.; Herbert, R.J.H.; Deboucha, W.; Reis, B.; et al. Optimisation of 3D Printed Concrete for Artificial Reefs: Biofouling and Mechanical Analysis. Constr. Build. Mater, 272, 121649 (2021) [CrossRef] [Google Scholar]
- Fu, Y.; Guo, N.; Wang, G.; Yu, M.; Cheng, Q.; Zhang, D. Underwater Additive Manufacturing of Ti-6Al-4V Alloy by Laser Metal Deposition: Formability, Gran Growth and Microstructure Evolution. Mater. Des., 197, 109196 (2021) [CrossRef] [Google Scholar]
- Wang, Z.D.; Sun, G.F.; Lu, Y.; Chen, M.Z.; Lan, H.F.; Bi, K.D.; Ni, Z.H. High- Performance Ti-6Al-4V with Graded Microstructure and Superior Properties Fabricated by Powder Feeding Underwater Laser Metal Deposition. Surf. Coat. Technol, 408, 126778 (2021) [CrossRef] [Google Scholar]
- B. Li, C. Han, Y. Xie, P.J.D.S. Bartolo, K. Zhou, Microstructural heterogeneity induced by thermal accumulation in a nickel–aluminium–bronze alloy additively manufactured via directed energy deposition, CIRP Annals. (2023). https://doi.org/10.1016/j.cirp.2023.04.008 [Google Scholar]
- T. Murray, S. Thomas, Y. Wu, W. Neil, C. Hutchinson, Selective laser melting of nickel aluminium bronze, Addit Manuf. 33 (2020). https://doi.org/10.1016/j.addma.2020.101122. [Google Scholar]
- C. Dharmendra, K. Gururaj, K.G. Pradeep, M. Mohammadi, Characterization of κ-precipitates in wire-arc additive manufactured nickel aluminium bronze: A combined transmission Kikuchi diffraction and atom probe tomography study, Addit Manuf. 46 (2021). https://doi.org/10.1016/j.addma.2021.102137. [Google Scholar]
- C. Dharmendra, K.P. Rice, B.S. Amirkhiz, M. Mohammadi, Atom probe tomography study of κ-phases in additively manufactured nickel aluminium bronze in as-built and heat-treated conditions, Mater Des. 202 (2021). https://doi.org/10.1016/j.matdes.2021.109541. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.