Open Access
| Issue |
MATEC Web Conf.
Volume 401, 2024
21st International Conference on Manufacturing Research (ICMR2024)
|
|
|---|---|---|
| Article Number | 02008 | |
| Number of page(s) | 6 | |
| Section | Additive Manufacturing | |
| DOI | https://doi.org/10.1051/matecconf/202440102008 | |
| Published online | 27 August 2024 | |
- IvánTabernero, A. Paskual, P. Álvarez, and A. Suárez, “Study on Arc Welding Processes for High Deposition Rate Additive Manufacturing,” Procedia CIRP, vol. 68, pp. 358–362, 2018, doi: 10.1016/j.procir.2017.12.095. [CrossRef] [Google Scholar]
- H. T. Vo, C. Grandvallet, and F. Vignat, “A model for Manufacturing Large Parts with WAAM Technology,” in Advances in Transdisciplinary Engineering, M. Shafik and K. Case, Eds., IOS Press, 2021. doi: 10.3233/ATDE210016. [Google Scholar]
- Y. Li, S. Wu, H. Li, Y. Dong, and F. Cheng, “Submerged arc additive manufacturing (SAAM) of low-carbon steel: Effect of in-situ intrinsic heat treatment (IHT) on microstructure and mechanical properties,” Additive Manufacturing, vol. 46, p. 102124, Oct. 2021, doi: 10.1016/j.addma.2021.102124. [CrossRef] [Google Scholar]
- Y. Li, S. Wu, J. Wang, H. Wang, W. Kong, and F. Cheng, “Microstructure homogeneity and strength-toughness balance in submerged arc additive manufactured Mn-Ni-Mo high-strength steel by unique intrinsic heat treatment,” Journal of Materials Processing Technology, vol. 307, p. 117682, Sep. 2022, doi: 10.1016/j.jmatprotec.2022.117682. [CrossRef] [Google Scholar]
- J. E. R. Dhas and S. Kumanan, “Optimization of parameters of submerged arc weld using non conventional techniques,” Applied Soft Computing, vol. 11, no. 8, pp. 5198–5204, Dec. 2011, doi: 10.1016/j.asoc.2011.05.041. [CrossRef] [Google Scholar]
- R. V. Rao and D. P. Rai, “Optimization of submerged arc welding process parameters using quasi-oppositional based Jaya algorithm,” J Mech Sci Technol, vol. 31, no. 5, pp. 2513–2522, May 2017, doi: 10.1007/s12206-017-0449-x. [CrossRef] [Google Scholar]
- B. Chan, R. S. Chandel, L. J. Yang, and M. J. Bibby, “A software system for anticipating the size and shape of submerged arc welds,” Journal of Materials Processing Technology, vol. 40, no. 3–4, pp. 249–262, Jan. 1994, doi: 10.1016/0924-0136(94)90453-7. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.