Open Access
| Issue |
MATEC Web Conf.
Volume 401, 2024
21st International Conference on Manufacturing Research (ICMR2024)
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 9 | |
| Section | Advanced Forming Technologies | |
| DOI | https://doi.org/10.1051/matecconf/202440101001 | |
| Published online | 27 August 2024 | |
- T. Deliktas, J. Böhm, D. Alba, and M. Liewald, ‘Digitization of cold extrusion pro- cesses using a combination of free-fall part monitoring with AI-controlled axial punch position’, in 42nd SENAFOR Conference, 2023. [Google Scholar]
- A. Schenek, M. Görz, M. Liewald, and K. R. Riedmüller, ‘Data-Driven Derivation of Sheet Metal Properties Gained from Punching Forces Using an Artificial Neural Net- work’, Key Eng. Mater., vol. 926, pp. 2174–2182, Jul. 2022. [CrossRef] [Google Scholar]
- M. Görz, A. Schenek, M. Liewald, and K. R. Riedmüller, ‘Evaluation of Feature Engi- neering Methods for the Prediction of Sheet Metal Properties from Punching Force Curves by an Artificial Neural Network’, 2023, pp. 75–85. [Google Scholar]
- P. Tchasse, A. Schenek, K. R. Riedmüller, and M. Liewald, ‘Detection of Defective Deep Drawn Sheet Metal Parts by Using Machine Learning Methods for Image Classi- fication’, in Lecture Notes in Production Engineering, vol. Part F1764, 2024, pp. 84–93. [Google Scholar]
- A. Schenek, M. Görz, K. R. Riedmüller, and M. Liewald, ‘Application of a neural net- work for predicting cutting surface quality of punching processes based on tooling pa- rameters’, IOP Conf. Ser. Mater. Sci. Eng., vol. 1284, no. 1, p. 012014, Jun. 2023. [CrossRef] [Google Scholar]
- A. Schenek, M. Görz, K. R. Riedmüller, and M. Liewald, ‘Prediction of Cutting Sur- face Parameters in Punching Processes Aided by Machine Learning’, TMS 2023 152nd Annu. Meet. Exhib. Suppl. Proc., pp. 607–622, 2023. [Google Scholar]
- S. Asahi, C. Karadogan, S. Tamura, S. Hayamizu, and M. Liewald, ‘Process data-based estimation of tool wear on punching machines using TCN-Autoencoder from raw time- series information’, IOP Conf. Ser. Mater. Sci. Eng., vol. 1157, no. 1, Jun. 2021. [Google Scholar]
- T. Schmid-Schirling and T. Körber, ‘Bauteile per Fingerabdruck im Sekundentakt zurückverfolgen’, JOT, J. fuer Oberflaechentechnik, vol. 62, no. 5, pp. 40–42, 2022. [Google Scholar]
- T. Schmid-Schirling, ‘Inspect-360 °HR Hochauflösende Maßhaltigkeits - und Tex- turprüfung im freien Fa ll’, Freiburg, Deutschland, 2023. [Google Scholar]
- T. Deliktas, M. Liewald, P. Clauß, T. Schmid -Schirling, I. Kuntz, M. Feurer, G. Dimitropoulos, F. Wientapper, and F. Räuchle, ‘Kontrolle und Identifizierung von Pressteilen im freien Fall’, wt Werkstatttechnik online, pp. 389–394, 2023. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.