EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 401 (2024) MATEC Web Conf., 401 (2024) 11005 References
Open Access
Issue
MATEC Web Conf.
Volume 401, 2024
21st International Conference on Manufacturing Research (ICMR2024)
Article Number 11005
Number of page(s) 8
Section Advancements in Manufacturing Lightweight Structures
DOI https://doi.org/10.1051/matecconf/202440111005
Published online 27 August 2024
  1. S. Maiti, M. R. Islam, M. A. Uddin, S. Afroj, S. J. Eichhorn, and N. Karim, “Sustainable fiber‐ reinforced composites: A Review,” Advanced Sustainable Systems, vol. 6, no. 11, p. 2200258, 2022. [CrossRef] [Google Scholar]
  2. E. F. Sheka, “Virtual Free-Radical Polymerization of Vinyl Monomers in View of Digital Twins,” Polymers, vol. 15, no. 14, p. 2999, 2023. [CrossRef] [Google Scholar]
  3. X. Xu, G. Wang, H. Yan, L. Zhang, and X. Yao, “Deep-learning-enhanced digital twinning of complex composite structures and real-time mechanical interaction,” Composites Science and Technology, vol. 241, p. 110139, 2023. [CrossRef] [Google Scholar]
  4. M. Eder and X. Chen, “FASTIGUE: Empowering digital twins of large-scale composite structures,” CompositesWorld, vol. 6, no. 8, 2020. [Google Scholar]
  5. K. He, R. Koppert, and B. Boikon, “Applying digital twin technology in thermoplastic composites production,” October, 2020. [Google Scholar]
  6. E. Vazquez-Nunez, A. M. Avecilla-Ramirez, B. Vergara-Porras, and M. d. R. López -Cuellar, “Green composites and their contribution toward sustainability: a review,” Polymers and Polymer Composites, vol. 29, no. 9_suppl, pp. S1588-S1608, 2021. [CrossRef] [Google Scholar]
  7. P. Ball and E. Badakhshan, “Sustainable Manufacturing Digital Twins: A Review of Development and Application,” in Sustainable Design and Manufacturing: Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021), 2022: Springer, pp. 159-168. [Google Scholar]
  8. C. Miskinis. “The history and creation of the digital twin concept.” Challenge Advisory LLP. https://www.challenge.org/insights/digital-twin-history/ (accessed March, 2024). [Google Scholar]
  9. M. W. Grieves, “Digital twins: past, present, and future,” in The Digital Twin: Springer, 2023, pp. 97-121. [Google Scholar]
  10. M. Attaran, S. Attaran, and B. G. Celik, “The impact of digital twins on the evolution of intelligent manufacturing and Industry 4.0,” Advances in Computational Intelligence, vol. 3, no. 3, p. 11, 2023. [CrossRef] [Google Scholar]
  11. E. Shehab et al., “Developing a Digital Twin for Carbon Fiber Composites Recycling: Challenges and Future Research Direction,” Advances in Science and Technology, vol. 116, pp. 61-66, 2022. [CrossRef] [Google Scholar]
  12. P. Bibow et al., “Model-driven development of a digital twin for injection molding,” in International Conference on Advanced Information Systems Engineering, 2020: Springer, pp. 85-100. [Google Scholar]
  13. I. O. Oladele, T. F. Omotosho, and A. A. Adediran, “Polymer-based composites: an indispensable material for present and future applications,” International Journal of Polymer Science, vol. 2020, pp. 1-12, 2020. [CrossRef] [Google Scholar]
  14. R. Hsissou, R. Seghiri, Z. Benzekri, M. Hilali, M. Rafik, and A. Elharfi, “Polymer composite materials: A comprehensive review,” Composite structures, vol. 262, p. 113640, 2021. [CrossRef] [Google Scholar]
  15. C. Wu, F. Xu, H. Wang, H. Liu, F. Yan, and C. Ma, “Manufacturing technologies of polymer composites—A Review,” Polymers, vol. 15, no. 3, p. 712, 2023. [CrossRef] [Google Scholar]
  16. A. Al Rashid, S. A. Khan, S. G. Al-Ghamdi, and M. Koç, “Additive manufacturing of polyme r nanocomposites: Needs and challenges in materials, processes, and applications,” Journal of Materials Research and Technology, vol. 14, pp. 910-941, 2021. [CrossRef] [Google Scholar]
  17. S. Salifu, O. Ogunbiyi, and P. A. Olubambi, “Potentials and challenges of additive manufacturing techniques in the fabrication of polymer composites,” The International Journal of Advanced Manufacturing Technology, vol. 122, no. 2, pp. 577-600, 2022. [CrossRef] [Google Scholar]
  18. G. S. Mann, L. P. Singh, P. Kumar, and S. Singh, “Green composites: A review of processing technologies and recent applications,” Journal of thermoplastic composite materials, vol. 33, no. 8, pp. 1145-1171, 2020. [CrossRef] [Google Scholar]
  19. M. Nagalakshmaiah et al., “Biocomposites: Present trends and challenges for the future,” Green composites for automotive applications, pp. 197-215, 2019. [Google Scholar]
  20. J. J. Andrew and H. Dhakal, “Sustainable biobased composites for advanced applications: recent trends and future opportunities–A critical review,” Composites Part C: Open Access, vol. 7, p. 100220, 2022. [CrossRef] [Google Scholar]
  21. W. Kupolati, E. R. Sadiku, A. Eze, I. Ibrahim, and O. Agboola, “Life cycle assessment, recycling and re-use of the bionanocomposites,” in Polymer Based Bio-nanocomposites: Properties, Durability and Applications: Springer, 2022, pp. 205-216. [Google Scholar]
  22. Y. Kalariya, S. B. Beemaraj, and A. Salvi, “Design and optimization of manufacturing process of polymer composites through multiscale cure analysis and NSGA-II,” Integrating Materials and Manufacturing Innovation, vol. 12, no. 4, pp. 321-337, 2023. [CrossRef] [Google Scholar]
  23. A. Alajmi et al., “An Experimental and Numerical Investigation into the Durability of Fibre/Polymer Composites with Synthetic and Natural Fibres,” Polymers, vol. 14, no. 10, p. 2024, 2022. [Google Scholar]
  24. A. Shalwan, A. Alajmi, and B. Yousif, “Theoretical Study of the Effect of Fibre Porosity on the Heat Conductivity of Reinforced Gypsum Composite Material,” Polymers, vol. 14, no. 19, p. 3973, 2022. [CrossRef] [Google Scholar]
  25. S. Adil and I. Lazoglu, “A review on additive manufacturing of carbon fiber‐reinforced polymers: Current methods, materials, mechanical properties, applications and challenges,” Journal of Applied Polymer Science, vol. 140, no. 7, p. e53476, 2023. [CrossRef] [Google Scholar]
  26. S. Singh, E. Shehab, N. Higgins, K. Fowler, T. Tomiyama, and C. Fowler, “Challenges of digital twin in high value manufacturing,” SAE Technical Paper, 0148-7191, 2018. [Google Scholar]
  27. J. Fernández -León, K. Keramati, L. Baumela, and C. González, “A digital twin for smart manufacturing of structural composites by liquid moulding,” The International Journal of Advanced Manufacturing Technology, vol. 130, no. 9, pp. 4679-4697, 2024. [CrossRef] [Google Scholar]
  28. A. Elsabbagh, “Processing and optimising the mechanical and physical properties of natural fibre reinforced polypropylene composites,” Technische Universität Clausthal, 2017. [Google Scholar]
  29. M. D. Banea, “Natural Fibre Composites and Their Mechanical Behaviour,” vol. 15, no. 5, p. 1185, 2023. [Google Scholar]
  30. W. Polini and A. Corrado, “Digital twin of composite assembly manufacturing process,” International Journal of Production Research, vol. 58, no. 17, pp. 5238-5252, 2020. [CrossRef] [Google Scholar]
  31. N. Li, G. Link, J. Jelonnek, and S. Ong, “Digital Twins towards Microwave-assisted 3D Printing of Continuous Carbon Fiber Reinforced Composites,” Procedia CIRP, vol. 119, pp. 158-163, 2023. [CrossRef] [Google Scholar]
  32. A. Hürkamp et al., “Combining simulation and machine learning as digital twin for the manufacturing of overmolded thermoplastic composites,” Journal of Manufacturing and Materials Processing, vol. 4, no. 3, p. 92, 2020. [CrossRef] [Google Scholar]
  33. W. Hu, T. Zhang, X. Deng, Z. Liu, and J. Tan, “Digital twin: A state-of-the-art review of its enabling technologies, applications and challenges,” Journal of Intelligent Manufacturing and Special Equipment, vol. 2, no. 1, pp. 1-34, 2021. [CrossRef] [Google Scholar]
  34. C. Ghnatios, P. Gérard, and A. Barasinski, “An advanced resin reaction modeling using data - driven and digital twin techniques,” International Journal of Material Forming, vol. 16, no. 1, p. 5, 2023. [CrossRef] [Google Scholar]
  35. S. S. Kamble, A. Gunasekaran, H. Parekh, V. Mani, A. Belhadi, and R. Sharma, “Digital twin for sustainable manufacturing supply chains: Current trends, future perspectives, and an implementation framework,” Technological Forecasting and Social Change, vol. 176, p. 121448, 2022. [CrossRef] [Google Scholar]
  36. T. Shen and B. Li, “Digital twins in additive manufacturing: a state-of-the-art review,” The International Journal of Advanced Manufacturing Technology, pp. 1-30, 2024. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.