| Issue |
MATEC Web Conf.
Volume 401, 2024
21st International Conference on Manufacturing Research (ICMR2024)
|
|
|---|---|---|
| Article Number | 03007 | |
| Number of page(s) | 6 | |
| Section | Advanced Materials, Processes and Analysis | |
| DOI | https://doi.org/10.1051/matecconf/202440103007 | |
| Published online | 27 August 2024 | |
Study on microstructure and property evolution of additive manufactured 2219 aluminum alloy under unidirectional compression and multidirectional loading deformation
National Key Laboratory for Precision Hot Processing of Metals, Harbin Institute of Technology, Harbin, China
* Corresponding author: hagongda@hit.edu.cn
The additive manufacturing technology of high strength 2219 aluminum alloy has been widely used in aerospace field. In this paper, coarse microstructure and poor mechanical properties of as-deposited 2219 Al alloy was focused, unidirectional compression and multidirectional loading deformation were studied, and the evolution law of microstructure and tensile properties was analysed. The results show that the deformation mainly concentrated in the core of uniaxial compression sample. The dynamic recrystallization was dominant above 450 °C. The lamellar microstructure was com pletely eliminated after multidirectional loading deformation, and hydrogen pores were completely closed. The yield stress reached 224 MPa, the ultimate tensile stress reached 386 MPa, and the elongation reached 11%, indicating that the improvement effect on microstructure and properties was the best.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.