Open Access
| Issue |
MATEC Web Conf.
Volume 401, 2024
21st International Conference on Manufacturing Research (ICMR2024)
|
|
|---|---|---|
| Article Number | 09001 | |
| Number of page(s) | 7 | |
| Section | Powder Metallurgy, Casting, Alloying, and Coating Processes | |
| DOI | https://doi.org/10.1051/matecconf/202440109001 | |
| Published online | 27 August 2024 | |
- ASTM, “Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075),” 2023. [Google Scholar]
- T. Nozaki and S. Itoyama, “Horizontal continuous casting processes. The state of the art and future trends.,” Trans. Iron Steel Inst. Japan, vol. 27, pp. 321–331, 1987. [CrossRef] [Google Scholar]
- V. V Nikam and R. G. Reddy, “Copper alloy bipolar plates for polymer electrolyte membrane fuel cell,” Electrochim. Acta, vol. 51, no. 28, pp. 6338–6345, 2006. [CrossRef] [Google Scholar]
- J. C. F. Millett, G. Whiteman, N. T. Park, S. Case, and G. Appleby-Thomas, “The effects of heat treatment upon the shock response of a copper-beryllium alloy,” Acta Mater., vol. 165, pp. 678–685, 2019. [CrossRef] [Google Scholar]
- T. D. A. Jones et al., “Prediction of Periodic Centerline Porosity and Pulse Marks by CFD and Experimentation for Continuously Cast Copper,” Metall. Mater. Trans. B, vol. 54, pp. 499–514, 2022. [Google Scholar]
- T. Hosono, H. Hidai, and H. Tokura, “Reactivity of Cubic Boron Nitride with Metal at High Temperature,” J. Japan Soc. Precis. Eng. Contrib. Pap., vol. 70, pp. 1271–1275, Oct. 2004. [Google Scholar]
- T. Katayama and T. Shibata, “Single crystal preparation of rare earth-cobalt intermetallic compounds by a BN-coated crucible,” J. Cryst. Growth, vol. 24–25, pp. 396–399, 1974. [CrossRef] [Google Scholar]
- D. J. Harvey, G. L. Vaneman, and F. Webber, “Horizontal Continuous casting of Nickel-base alloy,” J. Met., vol. 32, no. 8, p. 51, 1980. [Google Scholar]
- P. Marcus, Corrosion Mechanisms in Theory and Practice, Third Edition. Taylor & Francis, 2011. [Google Scholar]
- R. Rosenthal, B. R. Cardoso, I. S. Bott, R. P. R. Paranhos, and E. A. Carvalho, “Phase characterization in as-cast F-75 Co–Cr–Mo–C alloy,” J. Mater. Sci., vol. 45, no. 15, pp. 4021–4028, 2010. [CrossRef] [Google Scholar]
- K. Yamanaka, M. Mori, and A. Chiba, “Mechanical properties of as-forged Ni-free Co–29Cr–6Mo alloys with ultrafine-grained microstructure,” Mater. Sci. Eng. A, vol. 528, no. 18, pp. 5961–5966, 2011. [CrossRef] [Google Scholar]
- M. Caudillo, M. Herrera–Trejo, M. R. Castro, E. Ramírez, C. R. González, and J. I. Juárez, “On carbide dissolution in an as-cast ASTM F-75 alloy,” J. Biomed. Mater. Res., vol. 59, no. 2, pp. 378–385, Feb. 2002. [CrossRef] [Google Scholar]
- M. Mori, K. Yamanaka, and A. Chiba, “Phase decomposition in biomedical Co–29Cr– 6Mo–0.2N alloy during isothermal heat treatment at 1073K,” J. Alloys Compd., vol. 590, pp. 411–416, 2014. [CrossRef] [Google Scholar]
- K. C. Li, D. J. Prior, J. N. Waddell, and M. V Swain, “Microstructure, phase content, and thermal stability of a cast Co–Cr dental alloy after porcelain sintering cycles using electron backscatter diffraction,” J. Mater. Res., vol. 30, no. 14, pp. 2188–2196, 2015. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.