Open Access
| Issue |
MATEC Web Conf.
Volume 299, 2019
Modern Technologies in Manufacturing (MTeM 2019)
|
|
|---|---|---|
| Article Number | 02001 | |
| Number of page(s) | 8 | |
| Section | Automation of Manufacturing Systems and Assembly | |
| DOI | https://doi.org/10.1051/matecconf/201929902001 | |
| Published online | 02 December 2019 | |
- A.J. Álvares, J.C.E. Ferreira, and R.M. Lorenzo, J. Intell. Manuf., 19, no. 6, p. 643 (2008) [CrossRef] [Google Scholar]
- F. a Almeida, P. a Dias, G. a Gonçalves, M. b Peschl, and M. c Hoffmeister, Int. J. Ind. Eng. Comput., 2, no. 4, pp. 873–890 (2011) [Google Scholar]
- P. Kostal and A. Mudrikova, “Laboratory of Flexible Manufacturing System,” AMR, no. 429, pp. 31–36 (2012) [CrossRef] [Google Scholar]
- D. N. Šormaz, J. Arumugam, R.S. Harihara, C. Patel, and N. Neerukonda, Robot. Comput.-Integr. Manuf., 26, no. 6, pp. 583–595 (2010) [CrossRef] [Google Scholar]
- V. Quintana, L. Rivest, R. Pellerin, F. Venne, and F. Kheddouci, Comput. Ind., 61, no. 5, pp. 497–508 (2010) [Google Scholar]
- P. Košťál, D. R. Delgado Sobrino, R. Holubek, and R. Ružarovský, Appl. Mech. Mater., 693, pp. 3–8, (2014) [CrossRef] [Google Scholar]
- J. Békés, Analýza a syntéza strojárskych objektov a procesov. ALFA-vydavatel’stvo technickej a ekonomickej, (1986) [Google Scholar]
- F. Bohnen, T. Maschek, and J. Deuse, “Leveling of low volume and high mix production based on a Group Technology approach, ” CIRP J. Manuf. Sci. Technol., 4, no. 3, pp. 247–251 (2011) [CrossRef] [Google Scholar]
- D. Ben-Arieh and R. Sreenivasan, “Information analysis in a distributed dynamic group technology method,” Int. J. Prod. Econ., 60–61, pp. 427–432 (1999) [CrossRef] [Google Scholar]
- J. Kundrák, I. Sztankovics, and K. Gyáni, “Analysis of the Theoretical Values of Several Characteristic Parameters of Surface Topography in Rotational Turning” [Google Scholar]
- P. Tamás, “Application of Value Stream Mapping at Flexible Manufacturing Systems,” Key Eng. Mater., 686, pp. 168–173 (2016) [CrossRef] [Google Scholar]
- G. Kovács and S. Kot, “Facility layout redesign for efficiency improvement and cost reduction,” J. Appl. Math. Comput. Mech., 16, no. 1, pp. 63–74 (2017) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.