Issue |
MATEC Web Conf.
Volume 299, 2019
Modern Technologies in Manufacturing (MTeM 2019)
|
|
---|---|---|
Article Number | 04011 | |
Number of page(s) | 8 | |
Section | Machining Processes and Quality Assurance | |
DOI | https://doi.org/10.1051/matecconf/201929904011 | |
Published online | 02 December 2019 |
The influence of the cutting parameters on the pullout resistance of the M8 thread processed by tapping into the SikaBlock M960 material
Technical University of Cluj-Napoca, North University Center Baia Mare,
Dr. V. Babeş str., 62A,
430083,
Baia Mare,
Romania
* Corresponding author: Ravai.Nagy.Sandor@cunbm.utcluj.ro
Given that polyurethane materials are used more and more often in the assembly line of light alloy parts or thin steel sheets, it is necessary to determine the most favourable cutting parameters. Based on the studies in the field of threads, I found that the cutting parameters have an influence on the internal tapped thread pullout resistance. In the experiments, I studied the M8 thread manufactured by tapping into the SikaBlock@M960 material.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.