Issue |
MATEC Web Conf.
Volume 299, 2019
Modern Technologies in Manufacturing (MTeM 2019)
|
|
---|---|---|
Article Number | 04008 | |
Number of page(s) | 6 | |
Section | Machining Processes and Quality Assurance | |
DOI | https://doi.org/10.1051/matecconf/201929904008 | |
Published online | 02 December 2019 |
Comparative Assessment of Wear Indicators in Grinding Discs During Grinding of Selected Steels
1
Lublin University of Technology,
M36 Nadbystrzycka Street,
20-618,
Lublin,
Poland
2
University of Zilina,
8215/1 Univerzitna Street,
010 26,
Zilina,
Slovak Republic
3
Bialystok University of Technology,
45 Wiejska Street,
15-351,
Bialystok,
Poland
* Corresponding author: j.jozwik@pollub.pl
In the paper basic experimental tests were carried out to compare the wear indicators of selected abrasive grinding discs in grinding process of steel. Experimental tests on the wear and efficiency of metal grinding discs were made for four types of steel (S235, NC6, Hadfield steel, WNLV + QT steel). The wear parameter included in the ISO standard (KG) of new abrasive discs from European market were examined. This paper presents an analysis of the efficiency and wear of the company’s „MOST” grinding discs using an angle grinder.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.