| Issue |
MATEC Web Conf.
Volume 299, 2019
Modern Technologies in Manufacturing (MTeM 2019)
|
|
|---|---|---|
| Article Number | 03001 | |
| Number of page(s) | 6 | |
| Section | CAD-CAM | |
| DOI | https://doi.org/10.1051/matecconf/201929903001 | |
| Published online | 02 December 2019 | |
Optimization and efficiency of toolpath generation in CAD/CAM system
University of Žilina, Faculty of Mechanical Engineering, Department of Automation and Production systems,
Univerzitná 1,
010 26,
Žilina,
Slovak Republic
* Corresponding author: tomas.dodok@fstroj.uniza.sk
The optimization has an important role in machining processes preparation of NC programs. The article deals with the possibilities of the optimization using at utilization of the NC tool paths in CAD/CAM systems. The experiments deal with the possibility of optimization option in concrete CAD/CAM system. Particularly were compared optimized toolpaths from CAD / CAM system Creo with toolpaths optimized in an optimization program Optimizer based on genetic algorithms.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.