MATEC Web of Conferences

Open Access

Welcoming address - Rector State University of Malang 00001

H. Ahmad Rofi'uddin

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820400001

• Abstract
• PDF (184.9 KB)

Open Access

Welcoming address - Chairman of International Mechanical and Industrial Engineering Conference, IMIEC 2018 00002

Sukarni

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820400002

• Abstract
• PDF (240.3 KB)

Open Access

Tribological advancement – strategies and effects towards emissions and global energy consumption 00003

Masjuki Hassan, Syahir Amzar Zulkifli, Harith Hasnul and Ashraf Yusoff

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820400003

• Abstract
• PDF (337.8 KB)
• References

Open Access

Developments of next generation refrigerants and heat transfer 00004

Akio Miyara

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820400004

• Abstract
• PDF (431.7 KB)
• References

Open Access

Incorporation of nano-modified material in the production of smart concrete 00005

Prakasit Sokrai and Natt Makul

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820400005

• Abstract
• PDF (453.7 KB)
• References

Open Access

Triethylammonium hydrogen sulfate ionic liquid as a low-cost solvent: A short review of synthesis, analysis and applications 00006

S. M. Shahrul Nizan Shikh Zahari, Hazeeq Azman and Latifah Karim

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820400006

• Abstract
• PDF (411.0 KB)
• References

Open Access

Multistage artificial aging optimization for tensile properties of Duralium using Response Surface Method (RSM) 00007

Poppy Puspitasari, Tsamroh Dewi Izzatus, Mochamad Achyarsyah, Beny Bandanajaya and Dewi puspitasari

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820400007

• Abstract
• PDF (345.3 KB)
• References

Open Access

Characteristics of nanoclay reinforced starch biocomposites through the extrusion process 00008

Heru Suryanto, Alfian Widi Rahmawan, Solichin, Sahana Rizki Tata and Uun Yanuhar

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820400008

• Abstract
• PDF (408.1 KB)
• References

Open Access

Kinetic analysis of co-combustion of microalgae spirulina platensis and synthetic waste through the fitting model 00009

Sukarni Sukarni, Ardianto Prasetiyo, Sumarli Sumarli, Imam Muda Nauri and Avita Ayu Permanasari

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820400009

• Abstract
• PDF (283.8 KB)
• References

Open Access

Thermal decomposition behavior of water hyacinth (eichhornia crassipes) under an inert atmosphere 00010

Sukarni Sukarni, Aloon Eko Widiono, Sumarli Sumarli, Retno Wulandari, Imam Muda Nauri and Avita Ayu Permanasari

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820400010

• Abstract
• PDF (347.7 KB)
• References

Open Access

Temporal and spatial prediction of retailer growth 01001

Bertha Maya Sopha, Fredrika Makasenda and Anna Maria Sri Asih

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401001

• Abstract
• PDF (519.2 KB)
• References

Open Access

A study of consumer preferences for customized product design 01002

Endang Retno Wedowati, Moses Laksono Singgih and I Ketut Gunarta

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401002

• Abstract
• PDF (179.4 KB)
• References

Open Access

A study on perceptions of preschool Children’s furniture design: Pictorial stimuli experiment 01003

Pornchai Tamthintha, Kusuma Palaprom and Kritchakhis Nawattanaprasert

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401003

• Abstract
• PDF (370.3 KB)
• References

Open Access

Demand forecasting in Small and Medium Enterprises (SMEs) ED Aluminium Yogyakarta using causal, time series, and combined causal-time series approaches 01004

Wildanul Isnaini and Andi Sudiarso

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401004

• Abstract
• PDF (225.1 KB)
• References

Open Access

Analysis of human behavioral attributes in improving disaster evacuation strategy of mount merapi 01005

Anna Maria Sri Asih, Ekky Novia Rubbyarta and Bertha Maya Sopha

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401005

• Abstract
• PDF (235.8 KB)
• References

Open Access

Quality control of palm kernel oil using Individual Moving Range (I-MR) chart 01006

Fatimah, M Sayuti and Elsa Putri Pertiwi

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401006

• Abstract
• PDF (484.2 KB)
• References

Open Access

Service design improvement in Ragunan Zoo using TRIZ methodology 01007

Inaki Maulida Hakim, Kusuma Narpawandawi and Teuku Yuri M. Zagloel

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401007

• Abstract
• PDF (241.8 KB)
• References

Open Access

Development of sustainable procurement monitoring system performance based on Supply Chain Reference Operation (SCOR) and Analytical Hierarchy Process (AHP) on leather tanning industry 01008

Arditya Nur Waaly, Ari Yanuar Ridwan and Mohammad Deni Akbar

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401008

• Abstract
• PDF (407.2 KB)
• References

Open Access

Classification of sub-sectors in creative industry for regional economic development 01009

Deltaningtyas Tri Cahyaningrum, Erwin Widodo and Niniet Indah Arvitrida

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401009

• Abstract
• PDF (251.7 KB)
• References

Open Access

The impact of supply chain partnership and market driven strategy on consumer behavior in buying Vocaloid Hatsune Miku products 01010

Vicio Rizky Damar and Markus Hartono

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401010

• Abstract
• PDF (360.3 KB)
• References

Open Access

Competitiveness attributes of Small and Medium Enterprises (SMEs) in the global market (case study: garment SMEs in Tri Tunggal Village, Lamongan) 01011

Issa Dyah Utami, Trisita Novianti and Teuku Iqbal Dianta Romansa

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401011

• Abstract
• PDF (248.4 KB)
• References

Open Access

Failure Modes and Effects Analysis (FMEA) for evaluation of a sugarcane machine failure 01012

Hilma Raimona Zadry, Dendi Adi Saputra, Agung Budiman Tabri, Difana Meilani and Dina Rahmayanti

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401012

• Abstract
• PDF (184 KB)
• References

Open Access

Development of quality improvement matrix: An integrated tools for quality improvement 01013

Katon Muhammad and Putu Dana Karningsih

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401013

• Abstract
• PDF (210.1 KB)
• References

Open Access

Designing Key Performance Indicators (KPI) with macro ergonomics approach 01014

Abdul Alimul Karim, Sri Gunani Partiwi and Adithya Sudiarno

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401014

• Abstract
• PDF (211.1 KB)
• References

Open Access

A data envelopment analysis approach for assessing the efficiency of small and medium-sized wood-furniture enterprises: a case study 01015

Diana P. Sari, Naniek Utami Handayani, M. Mujiya Ulkhaq, Wiwik Budiawan, Dea Ladysia Maharani and Fahmi Ardi

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401015

• Abstract
• PDF (308.7 KB)
• References

Open Access

Occupational Health And Safety (OHS) management for employees on the risk of diseases due to the intensity of computer use in the workplace/industry 01016

Andika Bagus Nur Rahma Putra, M. Ihwanudin, Erwin Komara Mindarta, Poppy Puspitasari and M. Mirza Abdillah Pratama

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401016

• Abstract
• PDF (381.7 KB)
• References

Open Access

Electricity sustainable energy management model for community development holistically in Phranakhon Rajabhat University 01017

Isaree Srikun

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401017

• Abstract
• PDF (261.6 KB)
• References

Open Access

Understanding Facilities Management Practices to Improve Building Performance: The opportunity and challenge of the facilities management industry over the world 01018

Astri Anindya Sari

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820401018

• Abstract
• PDF (297.5 KB)
• References

Open Access

Optimization of industrial machine maintenance scheduling using ant colony method 02001

Iwan Aang Soenandi and Teuku Emily Budiman

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402001

• Abstract
• PDF (452.1 KB)
• References

Open Access

Manufacturing optimization using Tsukamoto fuzzy inference system method: A case study in block paving and solid concrete block industry 02002

M Sayuti, Juliananda and Diana Khairani Sofyan

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402002

• Abstract
• PDF (378.4 KB)
• References

Open Access

The hybrid-model architectural modelling based on ARIMA-BPNN methods for building materials demands forecasting 02003

Cynthia Hayat and Iwan Aang Soenandi

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402003

• Abstract
• PDF (384.7 KB)
• References

Open Access

Product mix optimization on multi-constraint production planning-a Fuzzy Mixed Integer Linear Goal Programming (FMILGP) approach: A single case study 02004

Meriastuti Ginting, Martin Kirawan and Budi Marpaung

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402004

• Abstract
• PDF (263.3 KB)
• References

Open Access

Optimizing coal blending quality through supplier selection and order allocation: A case of cement industry 02005

Dicky Fatrias, Nilda Tri Putri, Pri Gustari Akbar and Fidela Andari Fae

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402005

• Abstract
• PDF (284.3 KB)
• References

Open Access

A heuristic method for solving airline crew pairing problems 02006

Khusnul Novianingsih and Rieske Hadianti

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402006

• Abstract
• PDF (250.2 KB)
• References

Open Access

Optimization of inbound logistics cost in automotive industry 02007

Inaki Maulida Hakim, Rolina Oktapiani Zaqiah and Yuri M. Zagloel Teuku

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402007

• Abstract
• PDF (436.3 KB)
• References

Open Access

Evaluation of random parking layout SBA mall using integer linear programing 02008

Prima Denny Sentia, Nissa Prasanti, Andriansyah and Rizfa Ramadhani Pulungan

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402008

• Abstract
• PDF (332.2 KB)
• References

Open Access

Traffic queue modeling using arena simulation software (a case study of Mergan 4-Way intersection in Malang City) 02009

Dani Yuniawan, P.P Aang Fajar, Samsudin Hariyanto and Romi Setiawan

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402009

• Abstract
• PDF (250.4 KB)
• References

Open Access

Traffic queue proposal solution on T-junction by utilizing arena simulation software (case study of Dinoyo T-Junction Malang City) 02010

Dani Yuniawan, P.P Aang Fajar, Samsudin Hariyanto and W.P Ide Bagus

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402010

• Abstract
• PDF (269.4 KB)
• References

Open Access

Feasibility model for freight train insertion in one way – train schedule 02011

Arrifah Ratna Sari and Ahmad Rusdiansyah

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402011

• Abstract
• PDF (397.3 KB)
• References

Open Access

Modelling of Cutting Tool Condition Monitoring System (CTCMS) to support industry 4.0 02012

Ari Setiawan, Dina Angela and Billy Irawan

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402012

• Abstract
• PDF (377.5 KB)
• References

Open Access

Supplier selection and consistency level measurement of decision maker using AHP method and expertise level model 02013

Fatkhor Rozi and Evy Herowati

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402013

• Abstract
• PDF (367.6 KB)
• References

Open Access

An integrated fuzzy AHP and TOPSIS model for evaluating the performance of raw material suppliers: A case study in lasem batik writing centre 02014

Diana Puspita Sari, Wismar Rizki Wijayanti, Adhie Prayogo, M. Mujiya Ulkhaq and Dyah Ika Rinawati

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402014

• Abstract
• PDF (380.2 KB)
• References

Open Access

Two-Sided assembly line balancing to minimize number of workstation with considering the relationships between tasks 02015

Dina Rachmawaty, Putu Dana Karningsih and Budi Santosa

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402015

• Abstract
• PDF (356.4 KB)
• References

Open Access

Preventive maintenance policy on leasing by considering the usage rate 02016

Moh. Jufriyanto, Nani Kurniati and Ade Supriatna

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402016

• Abstract
• PDF (283.0 KB)
• References

Open Access

A Comparison of Exact Method - Metaheuristic Method in Determination for Vehicle Routing Problem 02017

Hilyatun Nuha, Putu Eka Dewi Karunia Wati and Wiwin Widiasih

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402017

• Abstract
• PDF (320.6 KB)
• References

Open Access

The effect of Kurtosis on the accuracy of artificial neural network predictive model 02018

Aisyah Larasati, Anik Dwiastutik, Darin Ramadhanti and Aal Mahardika

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820402018

• Abstract
• PDF (293.8 KB)
• References

Open Access

Ergonomic workstations for handicraft product made from fluorescent lamp waste 03001

Mochammad Rofieq

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403001

• Abstract
• PDF (355.1 KB)
• References

Open Access

Knowledge sharing, visibility improvement and productivity growth: Evidence from agro-industry manufacturing firm 03002

Kevin Natalardo and Oki Sunardi

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403002

• Abstract
• PDF (246.8 KB)
• References

Open Access

Microwave-assisted extraction of phenolic compounds from Moringa oleifera seed as anti-biofouling agents in membrane processes 03003

Ni'matul Izza, Shinta Rosalia Dewi, Ashried Setyanda, Agung Sukoyo, Panggulu Utoro, Dimas Firmanda Al Riza and Yusuf Wibisono

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403003

• Abstract
• PDF (304.8 KB)
• References

Open Access

A development of sustainable and successful business model for Thai local products: The mixed crispy rice noodle, Phra Na Khon Sri Ayutthaya Province 03004

Kusuma Palaprom and Kritchakhris Nawattanaprasert

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403004

• Abstract
• PDF (263.7 KB)
• References

Open Access

The use of indonesian soybean variety with time and planting location to the production to meet the demand 03005

Nelly Budiharti and Ing Wardana

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403005

• Abstract
• PDF (261.1 KB)
• References

Open Access

Development of agrotourism business model as an effort to increase the potency of tourism village(case study: Punten Village, Batu City) 03006

I Ketut Gunarta and Fuad Dwi Hanggara

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403006

• Abstract
• PDF (331.0 KB)
• References

Open Access

Reliability analysis of hanger shot blast KAZO machine in foundry plant 03007

Rinaldi Sam Prabowo, Priyo Agus Setiawan, Anda Iviana Juniani, Wiediartini and Ika Erawati

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403007

• Abstract
• PDF (301.8 KB)
• References

Open Access

Design of working procedure for handling the breakdown machine in parameter of reaction time based on Jidoka system approach in cement company 03008

Putri Nilda Tri, Amrina Elita, Rahmayanti Dina and Shifanof Gilang

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403008

• Abstract
• PDF (242.2 KB)
• References

Open Access

Kansei engineering-based robust design model for logistics services 03009

Markus Hartono and Amelia Santoso

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403009

• Abstract
• PDF (377.1 KB)
• References

Open Access

Development of fatigue, accident experiences and safety culture relationships to the risk of fishing perception on the accidents of fishing vessel small and medium 03010

Septi Nurindah Sari, Ratna Sari Dewi and Adithya Sudiano

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403010

• Abstract
• PDF (468.2 KB)
• References

Open Access

Designing an ergonomic backpack for sixth grade elementary school students in Bandung based on the ideal weight of backpack load 03011

Sonna Kristina and Bella Amanda

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403011

• Abstract
• PDF (345.4 KB)
• References

Open Access

Development progress monitoring system in Engineering Procurement Construction (EPC) company with Earn Value Analysis (EVA) approach based on web mobile 03012

Rhadityo Shakti Budiman and I Ketut Gunarta

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403012

• Abstract
• PDF (618.4 KB)
• References

Open Access

Assessment of exposure packaging worker and designing work methods using OCRA index in fertilizer producer company 03013

Ainun Dwi Fridayati, Wiediartini, Haidar Natsir Amrullah, Muhammad Shah, Urip Mudjiono and Edy Prasetyo Hidayat

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403013

• Abstract
• PDF (321.4 KB)
• References

Open Access

Fire risk assessment on hammer mill machine with human reliability assessment (HRA) and component reliability approaches 03014

Khariza Amalia, Haidar Natsir Amrullah, Arief Subekti, Moch. Luqman Ashari, Edy Prasetyo Hidayat, Urip Mudjiono and Hendro Agus Widodo

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403014

• Abstract
• PDF (455.5 KB)
• References

Open Access

Towards the greenship assessment and certificate of new building Design Recognition (DR) for the design of IDB-funded integrated classroom building Universitas Negeri Malang, Indonesia 03015

Apif M. Hajji and Dian Ariestadi

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403015

• Abstract
• PDF (337.8 KB)
• References

Open Access

Enhanced rooftop rainwater harvesting quality through filtration using zeolite and activated carbon 03016

Anie Yulistyorini, Gilang Idfi and Evy Dwi Fahmi

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403016

• Abstract
• PDF (284.6 KB)
• References

Open Access

Injection well as an eco-drainage solution to reduce surface run-off at the State University of Malang 03017

Gilang Idfi, Anie Yulistyorini and Tika Apriliani

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403017

• Abstract
• PDF (274.9 KB)
• References

Open Access

Development lean assessment indicator: A case study 03018

Iffad Rakhmanhuda and Putu Dana Karningsih

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820403018

• Abstract
• PDF (354.5 KB)
• References

Open Access

Spark ignition engine modeling for in-cylinder pressure and temperature prediction using simulink 04001

Nike Septivani and Byan Wahyu Riyandwita

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404001

• Abstract
• PDF (360.5 KB)
• References

Open Access

Artificial salmon tracking algorithm: Preliminary designing approach for optimizing the integrated mixed energy composition 04002

A.N. Afandi, Irham Fadlika, Quota Alief Sias, Y. Rahmawati, D. Lestari, A.N. Handayani, Yunis Sulistyorini, C.W.A. Farrel and R.S.A. Michiko

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404002

• Abstract
• PDF (281.7 KB)
• References

Open Access

Utilization of the dethridge wheel as a low head power generator and loss analysis 04003

Dan Mugisidi, Oktarina Heriyani, Rizal Andi Luhung and Moh. Ramdani Dwi Andrian

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404003

• Abstract
• PDF (268.3 KB)
• References

Open Access

Methods in water conservation as part of green building rating tools in indonesia – case study: Design of integrated classrooms building in Universitas Negeri Malang, Indonesia 04004

Apif M. Hajji, Bambang Suprianto and Dian Ariestadi

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404004

• Abstract
• PDF (690.2 KB)
• References

Open Access

Designing portable chopping plastic waste machine utilizing electric motor 04005

Erwin Komara Mindarta, Andre Ari Wibowo and Andika Bagus Nur Rahma Putra

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404005

• Abstract
• PDF (840.1 KB)
• References

Open Access

The effect of textured surfaces on the hydrodynamic pressure generation in journal bearings 04006

Muchammad, Mohammad Tauviqirrahman, Rizqy Amanullah Akbar, Fuad Hilmy and Jamari

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404006

• Abstract
• PDF (488.6 KB)
• References

Open Access

Development of an open-loop ground source cooling system for space air conditioning system in hot climate like Indonesia 04007

Jalaluddin, Akio Miyara, Shohei Ishikawa, Rustan Tarakka and Andi Amijoyo Mochtar

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404007

• Abstract
• PDF (341.5 KB)
• References

Open Access

Influence of boundary slip layout on the hydrodynamic performance of partially textured journal bearing by CFD method 04008

Mohammad Tauviqirrahman, Muchammad, Rizky Amanullah Akbar and Jamari

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404008

• Abstract
• PDF (460.7 KB)
• References

Open Access

Numerical study of flow characteristics on wing airfoil eppler 562 with whitcomb winglet variations 04009

S.P Setyo Hariyadi, Sutardi, Wawan Aries Widodo, Muhammad Anis Mustaghfirin and Arifandi Rachmadiyan

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404009

• Abstract
• PDF (927.5 KB)
• References

Open Access

Characteristic comparison of photovoltaic module and photovoltaic thermal 04010

Krismadinata, Remon Lapisa, Syahril and Asnil

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404010

• Abstract
• PDF (553.7 KB)
• References

Open Access

Performance testing of a downdraft biomass gasifier stove for cooking applications 04011

Woranuch Jangsawang

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404011

• Abstract
• PDF (279.3 KB)
• References

Open Access

A preliminary review of Indonesian national standard of chair and desk for junior high school level 04012

Yanto, Chih-Wei Lu and Winda Y. Caroline

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404012

• Abstract
• PDF (441.4 KB)
• References

Open Access

Mitigation of the alternative energy for the wind farm center considering temperature and wind speed 04013

Rima Septiani Prastika, A.N. Afandi and Dwi Prihanto

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404013

• Abstract
• PDF (505.5 KB)
• References

Open Access

CFD analysis of partial slip effect on the performance of hydrodynamic lubricated journal bearings 04014

Muchammad, Bambang Yunianto, Mohammad Tauviqirrahman, Widhi Ahmad Wicaksono and Jamari

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404014

• Abstract
• PDF (419.9 KB)
• References

Open Access

Effect of perforated concave delta winglet vortex generators on heat transfer augmentation of fluid flow inside a rectangular channel: An experimental study 04015

Syaiful, MSK Tony SU, Nazaruddin Sinaga, Retno Wulandari and Myung-whan Bae

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404015

• Abstract
• PDF (418.8 KB)
• References

Open Access

Effect of various number conical strip inserted in the tube on heat transfer performance 04016

M. Anis Mustaghfirin, Burniadi Moballa and Syaifullah Hamim Thohari

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404016

• Abstract
• PDF (325.3 KB)
• References

Open Access

The implementation of Customer Relationship Management (CRM) on textile supply chain using k-means clustering in data mining 04017

Anik Dwiastuti, Aisyah Larasati and Endang Prahastuti

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404017

• Abstract
• PDF (253.6 KB)
• References

Open Access

Numerical simulation of the effect of material catalytic converter on gas emission 04018

Suheni, Rudy Sunoko, Slamet Wahyudi and Amin S Leksono

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820404018

• Abstract
• PDF (430.7 KB)
• References

Open Access

Quenching and tempering parameter on Indonesian hot rolled plate steel for armour steel 05001

Yurianto, Pratikto, Rudy Sonoko, Wahyono and A.P. Bayuseno

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405001

• Abstract
• PDF (260.5 KB)
• References

Open Access

Development of Aceh iron sand to produce pig iron: studies on hardness properties 05002

M Sayuti, Akhyar Ibrahim, Muhammad Yusuf and Reza Putra

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405002

• Abstract
• PDF (234.3 KB)
• References

Open Access

Mechanical and physical properties of aluminium-silicon (Al-Si) casting alloys reinforced by Zinc Oxide (ZnO) 05003

Poppy Puspitasari, Okky Rachmadilla Soepriyanto, Muhammad Ilman Nur Sasongko, Johan Wayan Dika and Andoko

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405003

• Abstract
• PDF (353.9 KB)
• References

Open Access

The effects of sodium hydroxide and potassium permanganate treatment on roughness of coconut fiber surface 05004

Muhammad Arsyad and Rudy Soenoko

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405004

• Abstract
• PDF (759.4 KB)
• References

Open Access

Electric polarization properties of BaTiO₃-BiFeO₃ as nanomultiferroic material produced by sol-gel method 05005

Dwita Suastiyanti, Maykel T.E. Manawan and Marlin Wijaya

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405005

• Abstract
• PDF (384.0 KB)
• References

Open Access

Phase separation on ricinoleic acid freezing 05006

Firman, Barlian Hasan and Muhammad Anshar

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405006

• Abstract
• PDF (248.3 KB)
• References

Open Access

Microstructure and mechanical characteristics of hot forged lateritic steels 05007

Satrio Herbirowo, Luqmanul Hakim and Bintang Adjiantoro

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405007

• Abstract
• PDF (521.1 KB)
• References

Open Access

Analyze the effect of phosphorus on the mechanical properties and microstructure on cast iron 05008

Achmad Sambas, Ananto Gamawan and Sophiadi Gunara

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405008

• Abstract
• PDF (458.2 KB)
• References

Open Access

Fiberglass reinforced plastic as construction material for Indonesian fishing vessels – challenges and future potential development 05009

I Putu A. Wibawa and Richard W. Birmingham

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405009

• Abstract
• PDF (328.4 KB)
• References

Open Access

Effects of brass addition on the flexural strength and microstructure of porous clay/brass composites 05010

Muh Amin, Rubijanto Juni Pribadi and Jamasri

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405010

• Abstract
• PDF (528.4 KB)
• References

Open Access

Morinda citrifoliia L. as a renewable raw material for surface active agent 05011

Trismawati and D. Wikanaji

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405011

• Abstract
• PDF (454.1 KB)
• References

Open Access

Human error probability analysis of overhead crane operation in steel fabrication company using SLIM-DEMATEL-ANP method 05012

Annisya Arumy Nurdiawati, Lukman Handoko, Am Maisarah Disrinama, Haidar Natsir Amrullah, Denny Dermawan, Muhammad Shah and Fais Hamzah

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405012

• Abstract
• PDF (293.8 KB)
• References

Open Access

Numerical simulation of the oxygen distribution in silicon melt for different argon gas flow rates during Czochralski silicon crystal growth process 05013

Zumrotul Ida, Jyh-Chen Chen and Thi Hoai Thu Nguyen

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405013

• Abstract
• PDF (415.8 KB)
• References

Open Access

Analisys of casting defects and mechanical properties on Al-Si alloys using Bangkalan local clays as sand casting binder 05014

Candi Galih Syaifullah, Ayik Bela Saputra, F Shabrina Ruhyatul and Poppy Puspitasari

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405014

• Abstract
• PDF (291.4 KB)
• References

Open Access

Effect of peroxide treatment on the structure and transparency of bacterial cellulose film 05015

Heru Suryanto, Tito Arif Sutrisno, M. Muhajir, Neena Zakia and Uun Yanuhar

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405015

• Abstract
• PDF (513.9 KB)
• References

Open Access

The effectiveness of mendong plaited rope production: the design of automatic mendong rope twisting machine 05016

Duwi Leksono Edy, Widiyanti, Fahru Riza and Kharis Sofia Sari

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405016

• Abstract
• PDF (486.1 KB)
• References

Open Access

The potential of silk fibroin as a polymer composite reinforcement for bone implant materials 05017

Purnomo, Putu Hadi Setyarini and Ana Hidayati Mukaromah

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405017

• Abstract
• PDF (561.4 KB)
• References

Open Access

The inhibitive effect of tannin in Psidium guajava leaves towards 304SS corrosion in concentrated HCl 05018

Andita N. F. Ganda, Andoko, P. H. Setyarini and Femiana Gapsari

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405018

• Abstract
• PDF (382.9 KB)
• References

Open Access

Growth of anodic Aluminum Oxide using titanium as cathode – a review 05019

Putu Hadi Setyarini, Femiana Gapsari and Purnomo

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405019

• Abstract
• PDF (217.7 KB)
• References

Open Access

Heat treatment effect on metal matrix composite with brass matrix and fly ash 05020

Aminnudin Aminnudin and Moch. Agus Choiron

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820405020

• Abstract
• PDF (375.8 KB)
• References

Open Access

Study the effect of angle of attack on flow characteristics at racing bike helmet using CFD 06001

Syamsuri, M Hasan Syafik and Yudho Putro Iswanto

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820406001

• Abstract
• PDF (315.3 KB)
• References

Open Access

Enhancement of shearography-based damage identification using best tree wavelet packet analysis 06002

Andrzej Katunin, Hernani Lopes and José Viriato Araújo dos Santos

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820406002

• Abstract
• PDF (375.6 KB)
• References

Open Access

Damage evaluation based on ultrasonic testing of compos-ite aircraft elements and image analysis methods 06003

Angelika Wronkowicz and Krzysztof Dragan

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820406003

• Abstract
• PDF (319.1 KB)
• References

Open Access

Effect of friction welding conditions on tensile strength and hardness of AISI 310 stainless steel joints 06004

Muhammad Iswar and Rusdi Nur

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820406004

• Abstract
• PDF (371.8 KB)
• References

Open Access

GECOBRIDGE: A concept of a smart eco-friendly integrated bridge utilizing geopolymer and graded concrete technology 06005

M. Mirza Abdillah Pratama, Yustika Dyah Pratiwi, Miftah Aliyil ’Ilmi and Alifah Mahardika

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820406005

• Abstract
• PDF (291.8 KB)
• References

Open Access

Multi objective optimization for kerf and material removal rate in wire electrical discharge machining using Taguchi method combined grey relational analysis 06006

Pathya Rupajati, M. Kurniadi Rasyid and Ali Nurdin

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820406006

• Abstract
• PDF (272.5 KB)
• References

Open Access

Experimental and CFD analysis of rotary multi vane expander for small capacity generation 06007

Mohammad Mahardika

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820406007

• Abstract
• PDF (410.4 KB)
• References

Open Access

Effect of concession model and deregulation logistics policy for increasing port customer satisfaction in Indonesia 06008

Sirajuddin, Sunaryo and T. Yuri Zagloel

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820406008

• Abstract
• PDF (285.9 KB)
• References

Open Access

Hardness analysis on carburized steel weld joint by SMAW using different welding current 06009

Yanuar Rohmat Aji Pradana, Wahono, Dicky Tanzila and Azmi Lukman

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820406009

• Abstract
• PDF (1.107 MB)
• References

Open Access

An Effect of Electric Current Variations and Wire Feed Rate on Low Carbon Steels Toward Tensile Strength on The Result of Gas Metal Arc Welding 06010

Taufik Hardiansyah, Moch Rofi Imron, Johan Handoko, Solichin and Abdul Qolik

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820406010

• Abstract
• PDF (156.2 KB)
• References

Open Access

Estimation of calcaneal deformation while standing from the boolean operation between 3D and footprint image and its comparison with lateral x-ray 07001

Dwi Basuki Wibowo, Agus Suprihanto, Achmad Widodo and Gunawan Dwi Haryadi

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407001

• Abstract
• PDF (334.1 KB)
• References

Open Access

Numerical investigation on the elastic modulus of rubber-like materials by a rigid ball indentation technique 07002

Budi Setiyana, Sugiyanto, J. Jamari and M. Khafidh

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407002

• Abstract
• PDF (338.4 KB)
• References

Open Access

Pickup and delivery problem with LIFO, time duration, and limited vehicle number 07003

Andriansyah, Nissa Prasanti and Prima Denny Sentia

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407003

• Abstract
• PDF (311.8 KB)
• References

Open Access

Development model of train rescheduling model consider predictive delay 07004

Kurnia Iswardani and Ahmad Rusdiansyah

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407004

• Abstract
• PDF (315.0 KB)
• References

Open Access

Dynamic lot sizing problem under uncertainty of returned products in remanufacturing industry 07005

Iman Setyoaji

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407005

• Abstract
• PDF (512.4 KB)
• References

Open Access

Modelling Integration of System Dinamics and Game Theory for of Financial Technology Peer to Peer Lending Industry 07006

Deririnda Setyo Anresnani, Erwin Widodo and Bambang Syairuddin

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407006

• Abstract
• PDF (442.9 KB)
• References

Open Access

Vehicle Routing Problem (VRP) for courier service: A review 07007

Citra Dewi Purnamasari and Amelia Santoso

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407007

• Abstract
• PDF (331.7 KB)
• References

Open Access

Job shop scheduling considering material handling process 07008

Eka K.A. Pakpahan, Sonna Kristina, Ari Setiawan and Evelin Merlians

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407008

• Abstract
• PDF (316.3 KB)
• References

Open Access

Strength analysis of connecting rods with pistons using finite element method 07009

Andoko and Nanang Eko Saputro

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407009

• Abstract
• PDF (344.4 KB)
• References

Open Access

Failure simulation of connecting rods without pistons using finite element method 07010

Andoko and Nanang Eko Saputro

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407010

• Abstract
• PDF (388.6 KB)
• References

Open Access

Elastic linear analysis of CNC micro blanking machine using finite element method 07011

Lubis Didin Zakariya, Suprayitno, A. Khoiruddin and Firismanda dan Mukhamad Andi

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407011

• Abstract
• PDF (615.6 KB)
• References

Open Access

Design and development of a CNC micro blanking machine with mechanical and control validation investigation 07012

Didin Zakariya Lubis, Suprayitno, Yanuar Rohmat Aji Pradana and Khoiruddin Asfani

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407012

• Abstract
• PDF (432.4 KB)
• References

Open Access

Effects of DP steel microstructure on the disappearance of discontinuous yielding 07013

Prita Dewi Basoeki

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407013

• Abstract
• PDF (457.8 KB)
• References

Open Access

Optimization total deformation of knee implants made Ti6Al4V material 07014

Djoko Kustono, Retno Wulandari, Andoko, Poppy Puspitasari, Galih Adhi Kurniawan and Agus Dwi Putra

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407014

• Abstract
• PDF (277.4 KB)
• References

Open Access

Simulation of knee implants made of Ti6Al4V material during walking 07015

Djoko Kustono, Retno Wulandari, Andoko, Poppy Puspitasari, Galih Adhi Kurniawan and Agus Dwi Putra

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407015

• Abstract
• PDF (277.5 KB)
• References

Open Access

Aerodynamics analysis of electric car UM body surface using computational fluid dynamics 07016

Mardji, Andoko and Dani Prsetiyo

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407016

• Abstract
• PDF (400.2 KB)
• References

Open Access

Strenght analysis chassis of UM electric cars using finite element method 07017

Mardji, Andoko and Dani Prasetiyo

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407017

• Abstract
• PDF (509.3 KB)
• References

Open Access

The modeling and optimization of hot rolling process of A36 structural steel by using response surface methodology 07018

Avita Ayu Permanasari, Poppy Puspitasari, Moch. Agus Choiron, Andoko and Muhammad Taufiq Affandi

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407018

• Abstract
• PDF (3.355 MB)
• References

Open Access

Experimental investigation of design parameters for laboratory scale Pelton wheel turbine using RSM 07019

Avita Ayu Permanasari, Fajri Faizal Ainul Yaqin, Retno Wulandari, Sukarni and Poppy Puspitasari

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407019

• Abstract
• PDF (1.583 MB)
• References

Open Access

Simulation of human bone implant duralium material with variation loading using Ansys software 07020

Didin Mujahidin, Poppy Puspitasari and Djoko Kustono

Published online: 21 September 2018

DOI: https://doi.org/10.1051/matecconf/201820407020

• Abstract
• PDF (490.2 KB)
• References