| Issue |
MATEC Web Conf.
Volume 204, 2018
International Mechanical and Industrial Engineering Conference 2018 (IMIEC 2018)
|
|
|---|---|---|
| Article Number | 02012 | |
| Number of page(s) | 10 | |
| Section | Optimization | |
| DOI | https://doi.org/10.1051/matecconf/201820402012 | |
| Published online | 21 September 2018 | |
Modelling of Cutting Tool Condition Monitoring System (CTCMS) to support industry 4.0
1
Industrial Engineering, Institut Teknologi Harapan Bangsa, 40132 Bandung, Indonesia
2
Information Technology, Institut Teknologi Harapan Bangsa, 40132 Bandung, Indonesia
*
Corresponding author: ari_setiawan@ithb.ac.id
One of the value drivers in Industry 4.0 is asset utilization that has capability to remote monitoring and controlling the assets. Some of the problems on the production floor, especially in modern manufacturing areas such as machining process in the Flexible Manufacturing System (FMS), requires the condition of the cutting tools. This paper will discuss a model of cutting tools online monitoring system that operated in web based application. The model involves three sensors and a human machine interface to show the cutting tools condition. The sensors consist of temperature sensor, accelerometer, and electrical power consumption sensor; while in the experiment, the data of those sensors will be compared with the flank wear and crater wear on the cutting tools. The model shows that the data of temperatures, vibration and power consumption are collected by the sensors and sent by internet to the monitoring systems.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.