| Issue |
MATEC Web Conf.
Volume 204, 2018
International Mechanical and Industrial Engineering Conference 2018 (IMIEC 2018)
|
|
|---|---|---|
| Article Number | 07014 | |
| Number of page(s) | 6 | |
| Section | Construction | |
| DOI | https://doi.org/10.1051/matecconf/201820407014 | |
| Published online | 21 September 2018 | |
Optimization total deformation of knee implants made Ti6Al4V material
Department of Mechanical Engineering, Faculty of Engineering Universitas Negeri Malang, 65145 Malang Indonesia
*
Corresponding author: djoko.kustono.ft@um.ac.id
Bones play an integral role in human survival. Damage to the knee joint has prompted orthopaedic specialists to develop implants as one of the solutions. In this study, Ti6Al4V as the implant material was optimised to determine and achieve the optimum implant condition based on the loading applied and the total deformation occurred. The optimisation results showed that the activity of walking downstairs resulted in the highest average of total deformation (19345 mm), followed by walking (15984 mm) and jumping (2.94 mm).
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.