Issue |
MATEC Web Conf.
Volume 204, 2018
International Mechanical and Industrial Engineering Conference 2018 (IMIEC 2018)
|
|
---|---|---|
Article Number | 03017 | |
Number of page(s) | 6 | |
Section | Manufacture and System Design | |
DOI | https://doi.org/10.1051/matecconf/201820403017 | |
Published online | 21 September 2018 |
Injection well as an eco-drainage solution to reduce surface run-off at the State University of Malang
Civil Engineering Department, Faculty of Engineering, State University of Malang, 65145 Malang, Indonesia
*
Corresponding author: gilang.idfi@gmail.com
This study aims to investigate the plan design and reduction of the runoff discharge using the eco-drainage system in the form of injection well. This research was conducted through an analysis of the injection well plan design at Graha Rektorat of the State University of Malang (SUM) and testing of soil permeability coefficient in the laboratory using Falling Head Permeability method. The result showed that design of injection wells using 1.5 m diameter and 3 m of depth for ten injection wells reduced drainage load by 44%, 34.35%, and 28.9% at return period of 2, 5, and 10 years respectively and the value of soil permeability coefficient was 2.01 cm/hour.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.