EDPS Account

Volume 152 (2018)

Free Access to the whole issue

MATEC Web of Conferences

Volume 152 (2018)

9^th Eureca 2017 International Engineering Research Conference

Selangor, Malaysia, December 6, 2017
S. Narayana Namasivayam, M. Hosseini Fouladi, S.W. Eunice Phang, B.L. Chua, Y.H. Chow, L.C. Yong and A.S.M. Al-Obaidi (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 26 February 2018

PDF (48.3 KB)

Chemical Engineering

Open Access

Solid-Liquid Extraction Kinetics of Total Phenolic Compounds (TPC) from Red Dates 01001

Chua Bee Lin and Chen Yen Leng

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201001

Open Access

Drying Kinetics and Optimisation of Pectin Extraction from Banana Peels via Response Surface Methodology 01002

Chua Bee Lin and Chong Yek Cze

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201002

Open Access

Characteristics Study of Photovoltaic Thermal System with Emphasis on Energy Efficiency 01003

Chuah Yee Yong, Mohammad Taghi Hajibeigy, Chockalingam Aravind Vaithilingam and Rashmi Gangasa Walvekar

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201003

Open Access

Synthesis of A Sustainable Sago-Based Value Chain via Fuzzy Optimisation Approach 01004

Jeffrey Hong Seng Chong, Yoke Kin Wan and Viknesh Andiappan

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201004

Open Access

Parametric Study for Devulcanization of Waste Tire Rubber Utilizing Deep Eutectic Solvent (DES) 01005

Rashmi Walvekar, Kishen Kunju, Ricky Saputra, Khalid Siddiqui and Suganti Ramarad

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201005

Open Access

Design of Biomass Combined Heat and Power (CHP) Systems based on Economic Risk using Minimax Regret Criterion 01006

Wen Choong Ling, Viknesh Andiappan and Yoke Kin Wan

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201006

Open Access

Devulcanization of Waste Tire Rubber Using Amine Based Solvents and Ultrasonic Energy 01007

Rashmi Walvekar, Zulkefly Mohammad. Afiq, Suganti Ramarad and Siddiqui Khalid

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201007

Open Access

Removal of Dye in Wastewater by Adsorption-Coagulation Combined System with Hibiscus sabdariffa as the Coagulant 01008

Ho Nicholas Jian Hoong and Nurhazwani Ismail

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201008

Open Access

Potential of Hibiscus Sabdariffa and Jatropha Curcas as Natural Coagulants in the Treatment of Pharmaceutical Wastewater 01009

Sheena Sibartie and Nurhazwani Ismail

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201009

Open Access

Synthesis and Optimisation of A Sustainable Wastewater Treatment Plant via Material Flow Cost Account (MFCA)-based Approach 01010

Run Ting Siew, Yoke Kin Wan and Viknesh Andiappan

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201010

Open Access

Preliminary Study on Effect of Chemical Composition Alteration on Elastic Recovery and Stress Recovery of Nitrile Gloves 01011

Kai Yang Tan, Siew Wei Phang, Chee Kin Phang, Jing Lang Choh, Ching Pang Goh, Chong Ban Wong and Tiam Ting Tee

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201011

Open Access

Process Debottlenecking and Retrofit of Palm Oil Milling Process via Inoperability Input-Output Modelling 01012

May May Tan, Viknesh Andiappan and Yoke Kin Wan

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201012

Open Access

Coagulant Dipping Time and Temperature Optimisation for Latex Glove Uneven Coating Investigation 01013

Loong Than, Siew Wei Phang and Kin Nam Ho

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201013

Open Access

Assessment of Natural Deep Eutectic Solvent Pretreatment on Sugar Production from Lignocellulosic Biomass 01014

Yoon Li Wan and Yuen Jun Mun

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815201014

Mechanical Engineering

Open Access

Suppression of Ground Borne Vibration Induced by High-Speed Lines 02001

Ali Mohamed Rathiu, Mohammad Hosseini Fouladi, Satesh Narayana Namasivayam and Hasina Mamtaz

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202001

Open Access

Numerical Analysis and Geometry Optimisation of Vertical Vane of Room Air-conditioner 02002

Abdulkareem Sh. Mahdi Al-Obaidi, Chan Wei Yin, Felicia Wong Yen Myan and Yan Yao Chen

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202002

Open Access

The Fabrication of Non-Implant 3D Printed Nose 02003

Yong Leng Chuan and Elliot Andrews

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202003

Open Access

Assessing Bioinspired Topographies for their Antifouling Potential Control Using Computational Fluid Dynamics (CFD) 02004

Jacky Ling and Felicia Wong Yen Myan

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202004

Open Access

Design and Optimisation of Home Scale Greywater Recycling Package 02005

Kalaichelvan a/l Arugam, Azadeh Ghadimi and LH Chang

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202005

Open Access

Mechanical Characterization of Zirconia Ceramic Composite 02006

Kelvin Chew Wai Jin, Kam Dickson and Ramesh Singh

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202006

Open Access

Preparation and Characterization of Durian Husk Fiber Filled Polylactic Acid Biocomposites 02007

Man Chee Lee, Seong Chun Koay, Ming Yeng Chan, Ming Meng Pang, Pui May Chou and Kim Yeow Tsai

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202007

Open Access

Operational Research on Design and Process Optimization of Ozone Water Application in Kitchen 02008

Zhun Jing Lee, Pui May Chou, Choon Lih Hoo and Daniel Lu

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202008

Open Access

Stabilising an Inverted Pendulum with PID Controller 02009

Yon Yaw Lim, Choon Lih Hoo and Yen Myan Felicia Wong

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202009

Open Access

Evaluation of SIPIC01 and SIPIC02 on Motor Speed Control 02010

Kah Kit Wong, Choon Lih Hoo and Mohd Hardie Hidayat Mohyi

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202010

Open Access

Analysis of a Hybrid Mechanical Regenerative Braking System 02011

Matthew Toh Xiang Wen and Douglas Tong Kum Tien

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202011

Open Access

Sintered Properties of Stainless Steel-doped Y-TZP Ceramics 02012

Kelvin Chew Wai Jin, Mervyn Marlon Anak Mathew Minggat and Ramesh Singh

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202012

Open Access

Design and Analysis of Collapsible Scissor Bridge 02013

Mohamad Nabil Aklif Biro and Noor Zafirah Abu Bakar

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202013

Open Access

Comparisons of Flow Patterns over a Hierarchical and a Non-hierarchical Surface in Relation to Biofouling Control 02014

Mohammed Ridha Bin Ahmad Fawzan and Felicia Wong Yen Myan

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202014

Open Access

The Enhancement of Pre-Storage Filtration Efficiency for the Rainwater Harvesting System in Malaysia 02015

Yoong Sion Ong, Ken Sim Ong, Y.k. Tan and Azadeh Ghadimi

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202015

Open Access

Fabrication of Non-Implant 3D Printed Skin 02016

Yong Leng Chuan and Shivani Amish Kumar Pandya

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202016

Open Access

Lift and Drag of Non-conventional Wings at Subsonic Speeds and Zero Angle of Attack - An Experimental Investigation 02017

Abdulkareem Shafiq Mahdi Al-Obaidi and Ting Chern Wei

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202017

Open Access

In-situ Study of Seating Static Comfort in Passenger Vehicles 02018

Umi Salmah Seraj and Mohd Farid Aladdin

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202018

Open Access

Preparation and Characterization of Wood Plastic Composite Made Up of Durian Husk Fiber and Recycled Polystyrene Foam. 02019

Seong Chun Koay, Varnesh Subramanian, Ming Yeng Chan, Ming Meng Pang, Kim Yeow Tsai and Kean How Cheah

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202019

Open Access

Development of a PID Controlled Arduino-Based Stabiliser 02020

Yee Lyn Wah, Choon Lih Hoo, Yen Myan Felicia Wong and Jun Jet Tai

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202020

Open Access

Electrical Energy Harvesting from Cooker’s Wasted Heat with Using Conduction Cooling 02021

Wincent Ghafour Amouzard Mahdiraji

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202021

Open Access

Anti-windup PI controller, SIPIC For Motor Position Control 02022

Kah Kit Wong, Choon Lih Hoo and Mohd Hardie Hidayat Mohyi

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202022

Open Access

Design and Fabrication of Small Vertical-Take-Off-Landing Unmanned Aerial Vehicle 02023

Yasir Ashraf Abd Rahman, Mohammad Taghi Hajibeigy, Abdulkareem Shafiq Mahdi Al-Obaidi and Kean How Cheah

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815202023

Electrical & Electronic Engineering

Open Access

The Application of Image Processing to Solve Occlusion Issue in Object Tracking 03001

Yun Zhe Cheong and Wei Jen Chew

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815203001

Open Access

Comparative Study between Planar and Bent Antenna Characterization 03002

Lau Zheng Tung, Ghafour Amouzed Mahdiraji and Lee Chia Ping

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815203002

Open Access

Prediction of Cyclists Movement in Different Terrain Conditions 03003

Mahesh A/L V.Nagarrettinam, Aravind CV and Mohsen Nabi Poor

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815203003

Open Access

Design Analysis of a Dual Rotor Permanent Magnet Machine driven Electric Vehicle 03004

Mohd Izzat Bin Zainuddin and CV Aravind

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815203004

Open Access

Force Characteristics Analysis for Linear Machine with DC Field Excitations 03005

Preshant A/L Krishna, Aravind CV, Aminath Saadha and F. Azhar

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815203005

Open Access

Thermal Energy Recovery through Optimal Salt concentration in a Parabolic Trough Systems 03006

Rikesh Ramsurn and CV Aravind

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815203006

Open Access

Magnetic Geared Radial Axis Vertical Wind Turbine for Low Velocity Regimes 03007

Teow Wei Wei and CV Aravind

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815203007

Open Access

A Study on the Used of Bluetooth Detectors at a Fix Location for Vehicle Speed Estimation 03008

Way Shyun Neow and Edwin C.Y. Chung

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815203008

Postgraduate Engineering

Open Access

Design Analysis of Taper Width Variations in Magnetless Linear Machine for Traction Applications 04001

Aminath Saadha, CV Aravind, Preshant Krishna and F. Azhar

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815204001

Open Access

Proposed Framework of Hybrid Photovoltaic Thermal Systems to Ecotourism in Malaysia 04002

Mohammad Taghi Hajibeigy, CV Aravind and Rashmi Gangasa Walveka

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815204002

Open Access

Linking Liberatory Pedagogy to Engineering and Sustainable Development 04003

Jayasubamani Arvi S. Moganakrishnann, Satesh Narayana Namasivayam and NurHazwani Ismail

Published online: 26 February 2018

DOI: https://doi.org/10.1051/matecconf/201815204003