MATEC Web of Conferences

Open Access

About the conference

Published online: 24 October 2016

PDF (198 KB)

Open Access

Statement of Peer review

Published online: 24 October 2016

PDF (71.1 KB)

Open Access

Preface 00001

K. Saanouni, J.L. Chenot and J.L. Duval

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168000001

MS1: Generalized continua and nonlocal formulations

Open Access

Advanced numerical simulation based on a non-local micromorphic model for metal forming processes 01001

Evangelia Diamantopoulou, Carl Labergere, Houssem Badreddine and Khemais Saanouni

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168001001

Open Access

Nonlocal constitutive equations of elasto-visco-plasticity coupled with damage and temperature 01002

Weijie Liu, Khemais Saanouni, Carl Labergère, Houssem Badreddine, Samuel Forest and Ping Hu

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168001002

Open Access

Modelling of flow behaviour and dynamic recrystallization during hot deformation of MS-W 1200 using the phase field framework 01003

Jan Hiebeler, Kirill Khlopkov, Oleg Shchyglo, Thomas Pretorius and Ingo Steinbach

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168001003

Open Access

Application of a second-gradient model of ductile fracture on a Dissimilar Metal Weld 01004

Jun Yang, Rémi Lacroix, Jean-Michel Bergheau, Jean-Baptiste Leblond and Gilles Perrin

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168001004

Open Access

Finite Similitude in Metal Forming 01005

Keith Davey, Rooholamin Darvizeh and Anees Al-Tamimi

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168001005

MS2: Microstructure modeling in forming processes

Open Access

Simulation on microscopic deformation behavior of engine gasket 02001

Ke Cao, Yixi Zhao and Sun Jin

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002001

Open Access

A new micro scale FE model of crystalline materials in micro forming process 02002

Liang Luo, Haibo Xie, Dongbin Wei, Xiaogang Wang, Cunlong Zhou and Zhengyi Jiang

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002002

Open Access

Introduction to the level-set full field modeling of laths spheroidization phenomenon in α/β titanium alloys 02003

D. Polychronopoulou, N. Bozzolo, D. Pino Muñoz, J. Bruchon, M. Shakoor, Y. Millet, C. Dumont, I. Freiherr von Thüngen, R. Besnard and M. Bernacki

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002003

Open Access

A new algorithm for dense ellipse packing and polygonal structures generation in context of FEM or DEM 02004

Dmitrii N. Ilin and Marc Bernacki

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002004

Open Access

Full field modeling of dynamic recrystallization in a global level set framework, application to 304L stainless steel 02005

Romain Boulais-Sinou, Benjamin Scholtes, Daniel Pino Muñoz, Charbel Moussa, Isabelle Poitrault, Isabelle Bobin, Aurore Montouchet and Marc Bernacki

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002005

Open Access

Simulation of the combined process “helical rolling-pressing” in the software package Simufact. Forming 02006

Naizabekov Abdrakhman, Lezhnev Sergey, Panin Evgeniy and Arbuz Alexandr

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002006

Open Access

Ductility prediction of substrate-supported metal layers based on rate-independent crystal plasticity theory 02007

Holanyo K. Akpama, Mohamed Ben Bettaieb and Farid Abed-Meraim

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002007

Open Access

Direct micro-to-macro modelling of the cold rolling of pearlitic steel 02008

Laurent Delannay, Jeroen Tacq, Didier Barde and Marc Seefeldt

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002008

Open Access

Study on micro hydro-mechanical deep drawing using finite element method 02009

Xiaoguang Ma, Jingwei Zhao, Wei Du, Xin Zhang, Laizhu Jiang and Zhengyi Jiang

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002009

Open Access

Modeling grain orientation of DP600 steel by Nd:YAG laser 02010

Shibo Liu, Afia Kouadri-Henni and Adinel Gavrus

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002010

Open Access

Compaction simulation of nano-crystalline metals with molecular dynamics analysis 02011

A.R. Khoei, A. Rezaei Sameti, H. Mofatteh and M. Babaei

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002011

Open Access

Prediction of Mean Grain Size Evolution during the Forging of IN718 Turbine Disc 02012

Zhang Haiyan, Zhang Shihong and Cheng Ming

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002012

Open Access

Research on hot stamping for a typical part of B1500HS boron steel using experiment and numerical simulation methods 02013

Huiping Li, Bingtao Tang, Lianfang He and Cheng Wang

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002013

Open Access

Full-field simulation of solidification and forming of polycrystals 02014

Efim Borukhovich, Martin Boeff, Alexander Monas, Marvin Tegeler, Se-Jong Kim, Chang-Seok Oh and Ingo Steinbach

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002014

Open Access

Crystal plasticity extend FEM implementation of thermal-tensile aluminum alloy 02015

Yang Liu, Yiguo Zhu, Liang Ying and Ping Hu

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168002015

MS3: Defects and damage prediction in forming processes

Open Access

Biaxial experiments and numerical analyses on damage prediction in metal forming processes 03001

Michael Brünig, Steffen Gerke and Marco Schmidt

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168003001

Open Access

Ductile failure analysis of high strength steel in hot forming based on micromechanical damage model 03002

Liang Ying, Wenquan Liu, Dantong Wang and Ping Hu

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168003002

Open Access

Prediction of Forming Limit Diagrams under combined Bending-Stretching loadings 03003

Mohamed Ben Bettaieb, Honoré Lagaza, Farid Abed-Meraim and Xavier Lemoine

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168003003

Open Access

Evaluation of ductile failure models in Sheet Metal Forming 03004

Rui Amaral, Pedro Teixeira, Erfan Azinpour, Abel D. Santos and J. Cesar de Sa

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168003004

Open Access

Prediction of wrinkling and springback in sheet metal forming 03005

D.M. Neto, M.C. Oliveira, J.L. Alves, A.D. Santos and L.F. Menezes

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168003005

Open Access

Numerical prediction of ductile failure in the blanking process by means of uncoupled and coupled phenomenological damage models 03006

Cristian Canales and Jean-Philippe Ponthot

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168003006

Open Access

Determination of instability of a DP 980 steel sheet under different stress states based on experiment and theoretical models 03007

Hong-Wu Song, Dong-Zhi Sun, Florence Andrieux and Shi-Hong Zhang

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168003007

MS4: Advanced modeling of contact interfaces in forming

Open Access

FEM-DEM coupling simulations of the tool wear characteristics in prestressed machining superalloy 04001

Peng Ruitao, Tang Heng, Tang Xinzi and Zhou Zhuan

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168004001

Open Access

Finite element method analysis of surface roughness transfer in micro flexible rolling 04002

Feijun Qu, Haibo Xie and Zhengyi Jiang

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168004002

Open Access

Advanced Wear Simulation for Bulk Metal Forming Processes 04003

Bernd-Arno Behrens, Anas Bouguecha, Milan Vucetic and Alexander Chugreev

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168004003

Open Access

Comparative analysis of bonding mechanism in solid state metal working processes 04004

G. Buffa, S. Pellegrino, E. Lo Valvo and L. Fratini

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168004004

Open Access

Heat transfer modeling in asymmetrical sheet rolling of aluminium alloys with ultra high shear strain 04005

Alexander Pesin and Denis Pustovoytov

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168004005

Open Access

Modeling of the roll wear and material damage during high-ratio differential speed rolling of aluminium alloy 7075 04006

Alexander Pesin, Denis Pustovoytov and Natalya Lokotunina

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168004006

MS5: Advanced anisotropic constitutive equations for forming processes simulation

Open Access

On twinning and anisotropy in rolled Mg alloy AZ31 under uniaxial tension 05001

Xiaoqian Guo, Adrien Chapuis, Xianbiao Mao, Qing Liu and Peidong Wu

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168005001

Open Access

Tension-compression asymmetry modelling: strategies for anisotropy parameters identification. 05002

Pedro Barros, José Luís Alves, Marta Oliveira and Luís Filipe Menezes

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168005002

Open Access

Fracture prediction with a material model based on stress-rate dependency related with non-associated flow rule 05003

Tetsuo Oya, Jun Yanagimoto, Koichi Ito, Gen Uemura and Naomichi Mori

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168005003

MS6: From numerical modeling of forming processes down to in-use properties

Open Access

Creep age forming of Al-Cu-Li alloy: Application to thick sheet forming of double curvature aircraft panel 06001

Wael Younes, Eliane Giraud, Zouari Ahmed, Philippe Dal Santo and Sjoerd van der Veen

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168006001

Open Access

Multi Scale Models for Flexure Deformation in Sheet Metal Forming 06002

Edmondo Di Pasquale

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168006002

Open Access

Residual stresses of a magnesium alloy (AZ31) welded by the friction stir welding processes 06003

A. Kouadri-Henni, L. Barrallier and Riad Badji

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168006003

Open Access

Modeling Metadynamic Recrystallization of a Die Steel during Ingot Breakdown Process 06004

Kanwal Chadha, Davood Shahriari and Mohammad Jahazi

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168006004

MS7: Advanced computational methods in forming processes simulation

Open Access

Simulation of nonlinear benchmarks and sheet metal forming processes using linear and quadratic solid–shell elements combined with advanced anisotropic behavior models 07001

Peng Wang, Hocine Chalal and Farid Abed-Meraim

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168007001

Open Access

Automatic correction of the time step in implicit simulations of thermomechanical problems 07002

J.M.P. Martins, D.M. Neto, J.L. Alves, M.C. Oliveira and L.F. Menezes

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168007002

Open Access

Interaction of various functional elements in thin-walled cups formed by a sheet-bulk metal forming process 07003

Robert Schulte, Thomas Schneider, Michael Lechner and Marion Merklein

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168007003

Open Access

A new shell element taking thickness-stretchability into account for mechanics-based springback compensation system 07004

Hibiki Arashiyama, Tetsuo Oya and Koichi Ito

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168007004

Open Access

An Element Free Galerkin method for an elastoplastic coupled to damage analysis 07005

Zohra Sendi, Hédi Belhadjsalah, Carl Labergere and Khémais Saanouni

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168007005

MS8: Numerical modeling of additive manufacturing

Open Access

Finite element modeling of deposition of ceramic material during SLM additive manufacturing 08001

Qiang Chen, Gildas Guillemot, Charles-André Gandin and Michel Bellet

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168008001

Open Access

Application to the additive fabrication of Object Oriented Methodology 08002

Jean-François Couturier and Alexandre Schneider

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168008002

MS9: Modeling and numerical simulation of thixoforming processes

Open Access

Cross dies forging: A new method to reduce forging force & price up to 80% thanks to FEM method 09001

Hamid Mansouri and Ahmad Nasri Mohajerani

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168009001

MS10: Design, Optimization, Inverse Methods and Uncertainties in Forming Processes

Open Access

Research on optimization design of conformal cooling channels in hot stamping tool based on response surface methodology and multi-objective optimization 10001

Bin He, Yanglei Si, Liang Ying and Ping Hu

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168010001

Open Access

Semi-analytic parameter identification for complex yield functions 10002

Niklas Küsters and Alexander Brosius

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168010002

Open Access

Constrained design of sheet forming processes 10003

Evripides G. Loukaides and Julian M. Allwood

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168010003

Open Access

Multi-objective optimization under uncertainty for sheet metal forming 10004

Pascal Lafon, Pierre Antoine Adragna and Von Dim Nguyen

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168010004

Open Access

Sensitivity analysis of the Expansion Process for Alloy UNS N08028 10005

Aitor Navarro, Mario Lechner, Unai Ruiz and Alejandra Lopez

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168010005

Open Access

Fast variable stiffness composite cylinder uncertainty analysis by using reanalysis assisted Copula function 10006

Zeng Yang, Enying Li and Hu Wang

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168010006

Open Access

Numerical investigation of manufacturing hollow preforms by combining the processes backward cup extrusion and piercing 10007

Robinson Henry and Mathias Liewald

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168010007

Open Access

Multi-criteria optimization strategies for production chains 10008

Jan Kusiak, Paweł Morkisz, Piotr Oprocha, Wojciech Pietrucha and Łukasz Sztangret

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168010008

Open Access

Rapid Tools Compensation in Sheet Metal Stamping Process 10009

Lorenzo Iorio, Matteo Strano and Michele Monno

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168010009

Open Access

A new optimization procedure for the accurate characterization of thermal phase transformation curves based on controlled quenching experiments 10010

Maurice Peterli, Minh-Trung Truong, Niko Manopulo and Pavel Hora

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168010010

Open Access

Optimization of the single point incremental forming process for titanium sheets by using response surface 10011

Badreddine Saidi, Laurence Giraud-Moreau and Abel Cherouat

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168010011

Open Access

Identification of material parameters using indentation test —study of the intrinsic dimensionality of P-h curves and residual imprints 10012

Liang Meng, Piotr Breitkopf and Guenhael Le Quilliec

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168010012

MS11: Advances in Forming Simulation. A Symposium in Honor of Professor J.L. Chenot

Open Access

Elastic-plastic transition: A universal law 11001

Zhong Chen, Hyuk Jong Bong, Dayong Li and R.H. Wagoner

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168011001

Open Access

Principles of polymer processing modelling 11002

Jean-François Agassant and Malcolm. R. Mackley

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168011002

Open Access

Significance of the local sheet curvature in the prediction of sheet metal forming limits by necking instabilities and cracks 11003

Pavel Hora, Longchang Tong, Maysam Gorji, Niko Manopulo and Bekim Berisha

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168011003

Open Access

Support Tool for Anchoring System Optimization of Titanium Craniofacial Prostheses 11004

Claudio Ciancio, Maria Vittoria Caruso, Gionata Fragomeni and Giuseppina Ambrogio

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168011004

Open Access

Dynamic DOE for porthole die extrusion optimisation 11005

Claudio Ciancio, Francesco Gagliardi, Giuseppina Ambrogio and Luigi Filice

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168011005

Open Access

Computer system for identification of tool wear model in hot forging 11006

Marek Wilkus, Łukasz Rauch, Zbigniew Gronostajski, Sławomir Polak and Maciej Pietrzyk

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168011006

Open Access

Case study on the influence of kinematic hardening within a parameter-free and non-invasive form finding approach 11007

Philipp Landkammer and Paul Steinmann

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168011007

MS12: Computational Fluid Dynamics in Material Forming Processes

Open Access

Simulation of Friction Stir Processing in 304L Stainless Steel 12001

M.P. Miles, T.W. Nelson, F.C. Liu, C. Gunter and L. Fourment

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168012001

Open Access

Numerical Simulation of Temperature Distribution and Material Flow During Friction Stir Welding 2017A Aluminum Alloys 12002

Oussama Mimouni, Riad Badji, Mohamed Hadji, Afia Kouadr-Davidi, Hamel Rachid and Nabil Chekroun

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168012002

Open Access

Sensitivity analysis of size effect on the performance of hydrostatic bearing 12003

Chen Dongju, Dong Lihua, Zhou Shuai and Fan Jinwei

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168012003

IMS1: Engineering simulation of Bulk forming processes

Open Access

FEM Analysis of the Multi-Wedge Helical Rolling Process for a Workholding Bolt 13001

Zbigniew Pater

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168013001

Open Access

Theoretical study on Cold Open Die Forging Process Optimization for Multipass Workability 13002

Ajitkumar Gaikwad, Shreyas Kirwai, Provat Koley, Dr. G. Balachandran and Dr. Rajkumar Singh

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168013002

Open Access

The process parameters effect of ovality in cross wedge rolling for hollow valve without mandril 13003

Hongchao Ji, Jinping Liu, Baoyu Wang, Jianguo Lin and Xuefeng Tang

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168013003

Open Access

Numerical analysis of bevel gear forming 13004

Jaroslaw Bartnicki

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168013004

Open Access

Numerical investigations of multicomponent process lightweight design for joining gearwheels by lateral extrusion 13005

Robert Meissner and Mathias Liewald

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168013005

Open Access

Interpolation of final geometry and result fields in process parameter space 13006

Grzegorz Misiun, Chao Wang, Hubert Geijselaers and Ton van den Boogaard

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168013006

IMS2: Engineering simulation of sheet forming processes

Open Access

Implementing Digital Image Correlation for Determining the Tensile Characteristics of Post-Processed Thin Sheet Metal 14001

Andrew D. Evans, Amit Das and Nick Croft

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168014001

Open Access

Application of Multivariate Adaptive Regression Splines to Sheet Metal Bending Process for Springback Compensation 14002

Rasim Aşkın Dilan, Tuna Balkan and Bülent E. Platin

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168014002

Open Access

Finite element analysis of non-isothermal warm deep drawing of dual phase steel 14003

T. Pepelnjak and B. Kaftanoglu

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168014003

Open Access

Method for Deep Drawing Process Control Using Segmented-Multiple Active Drawbeads 14004

Catalina Maier, Viorel Paunoiu, Vasile Marinescu and Alexandru Epureanu

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168014004

Open Access

Influence of Surface-profile and Movement-path of Roller on Thickness Thinning during Multi-pass Deep Drawing Spinning 14005

Qinxiang Xia, Junhao Zhang, Chenglong Huang and Xiuquan Cheng

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168014005

Open Access

Finite Element Analysis of hot Single Point Incremental forming of hip prostheses 14006

Manel Sbayti, Andrea Ghiotti, Riadh Bahloul, Hedi Belhadjsalah and Stefania Bruschi

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168014006

Topic 3: Application to metal or multi-metal forming processes

Open Access

Thinning behavior of laminated sheets metal in warm deep-drawing process under various grain sizes 15001

Mehran Kadkhodayan and Ehsan Afshin

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168015001

Open Access

Suitability of the electromagnetic ring expansion test to characterize materials under high strain rate deformation 15002

Kang Yang, Geoffrey Taber, Thaneshan Sapanathan, Anupam Vivek, Glenn S Daehn, Rija Nirina Raoelison, Nicolas Buiron and Mohamed Rachik

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168015002

Open Access

Material flow analysis in dissimilar friction stir welding of AA2024 and Ti6Al4V butt joints 15003

Gianluca Buffa, Michele De Lisi, Antonio Barcellona and Livan Fratini

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168015003

Open Access

Finite element modeling of tube deformation during cold pilgering 15004

Yağız Azizoğlu, Mattias Gärdsback, Bengt Sjöberg and Lars-Erik Lindgren

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168015004

Open Access

Formability Effects of Variable Blank Holder Force on Deep Drawing of Stainless Steel 15005

Pramote Koowattanasuchat, Numpon Mahayotsanun, Sukunthakan Ngernbamrung and Sasawat Mahabunphachai

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168015005

Open Access

FEM Analysis of Punching-Process in Consideration of Micro Die Wear 15006

Takashi Ueda, Takashi Iizuka and Shinichi Enoki

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168015006

Open Access

Biomedical Titanium alloy prostheses manufacturing by means of Superplastic and Incremental Forming processes 15007

Antonio Piccininni, Francesco Gagliardi, Pasquale Guglielmi, Luigi De Napoli, Giuseppina Ambrogio, Donato Sorgente and Gianfranco Palumbo

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168015007

Open Access

Finite Element Modelling of Combined Process of Plate Rolling and Stamping 15008

Alexander Pesin, Ernst Drigunt, Denis Pustovoytov and Ilya Pesin

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168015008

Open Access

The Role of Evolutive Elastic Properties in the Performance of a Sheet Formed Spring Applied in Multimedia Car Industry 15009

Joel Silva, João Faria, Rita Ferreira, Pedro Bernardo and J. L Alves

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168015009

Open Access

Solutions for Safe Hot Coil Evacuation and Coil Handling in Case of Thick and High Strength Steel 15010

Stefan Sieberer, Lukas Pichler and Manfred Hackl

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168015010

Open Access

Investigation of a composite ring rolling process by FEM and experiment 15011

Joachim Seitz, Gideon Schwich, Stefan Guenther and Gerhard Hirt

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168015011

Open Access

A numerical study of multi-pass design based on Bezier curve in conventional spinning of spherical components 15012

Tian Gan, Qingshuai Kong, Zhongqi Yu, Yixi Zhao and Xinmin Lai

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168015012

Open Access

Advanced constitutive modeling and application to industrial forming processes 15013

Frédéric Barlat and Dong-Jin Kim

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168015013

Topic 4: Application to composites, polymers and other materials

Open Access

Finite element simulation of stretch forming of aluminium-polymer laminate foils used for pharmaceutical packaging 16001

Simon Müller and Sabine M. Weygand

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168016001

Open Access

Numerical investigation of blanking for metal polymer sandwich sheets 16002

Florian Gutknecht, David Übelacker, Till Clausmeyer and A. Erman Tekkaya

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168016002

Open Access

Numerical investigations for simultaneously processing metal and plastic using impact extrusion 16003

Jonas Wälder, Jochen Wellekötter, Alexander Felde, Mathias Liewald and Christian Bonten

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168016003

Open Access

Effect of normal stresses on the results of thermoplastic mold filling simulation 16004

Alexander Bakharev, David Astbury, Shishir Ray, Franco S. Costa and Russell Speight

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168016004

Open Access

Prediction of acoustic foam properties by numerical simulation of polyurethane foaming process 16005

Hichem Abdessalam, Boussad Abbès, Yuming Li, Ying-Qiao Guo, Elvis Kwassi and Jean-Luc Romain

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168016005

Open Access

Development and identification of rheological model adapted for Powder Injection Moulding 16006

Dimitri Claudel, Mohamed Sahli, Thierry Barriere and Jean-Claude Gelin

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168016006

Open Access

Determination of the activation energy of silicone rubbers using different kinetic analysis methods 16007

Huibin Ou, Mohamed Sahli, Thierry Barriere and Jean-Claude Gelin

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168016007

Open Access

Mechanical behavior of fiber/matrix interfaces in CFRP sheets subjected to plastic deformation 16008

Ryuta Kamiya and Tetsuo Oya

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168016008

Open Access

Homogenization on Multi-Materials’ Elements: Application to Printed Circuit Boards and Warpage Analysis 16009

Manuel Araújo, J. L. Alves, Paulo Silva and Pedro Delgado

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168016009

Open Access

Integrated thermomechanical model for forming of glass containers 16010

Bruno Martins, Ana Reis, Pedro Teixeira, Margarida Machado, Jaime Rodrigues and J. Cesar de Sá

Published online: 24 October 2016

DOI: https://doi.org/10.1051/matecconf/20168016010

MATEC Web of Conferences

Volume 80 (2016)

NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes

About the conference

Statement of Peer review

Preface 00001

MS1: Generalized continua and nonlocal formulations

Advanced numerical simulation based on a non-local micromorphic model for metal forming processes 01001

Nonlocal constitutive equations of elasto-visco-plasticity coupled with damage and temperature 01002

Modelling of flow behaviour and dynamic recrystallization during hot deformation of MS-W 1200 using the phase field framework 01003

Application of a second-gradient model of ductile fracture on a Dissimilar Metal Weld 01004

Finite Similitude in Metal Forming 01005

MS2: Microstructure modeling in forming processes

Simulation on microscopic deformation behavior of engine gasket 02001

A new micro scale FE model of crystalline materials in micro forming process 02002

Introduction to the level-set full field modeling of laths spheroidization phenomenon in α/β titanium alloys 02003

A new algorithm for dense ellipse packing and polygonal structures generation in context of FEM or DEM 02004

Full field modeling of dynamic recrystallization in a global level set framework, application to 304L stainless steel 02005

Simulation of the combined process “helical rolling-pressing” in the software package Simufact. Forming 02006

Ductility prediction of substrate-supported metal layers based on rate-independent crystal plasticity theory 02007

Direct micro-to-macro modelling of the cold rolling of pearlitic steel 02008

Study on micro hydro-mechanical deep drawing using finite element method 02009

Modeling grain orientation of DP600 steel by Nd:YAG laser 02010

Compaction simulation of nano-crystalline metals with molecular dynamics analysis 02011

Prediction of Mean Grain Size Evolution during the Forging of IN718 Turbine Disc 02012

Research on hot stamping for a typical part of B1500HS boron steel using experiment and numerical simulation methods 02013

Full-field simulation of solidification and forming of polycrystals 02014

Crystal plasticity extend FEM implementation of thermal-tensile aluminum alloy 02015

MS3: Defects and damage prediction in forming processes

Biaxial experiments and numerical analyses on damage prediction in metal forming processes 03001

Ductile failure analysis of high strength steel in hot forming based on micromechanical damage model 03002

Prediction of Forming Limit Diagrams under combined Bending-Stretching loadings 03003

Evaluation of ductile failure models in Sheet Metal Forming 03004

Prediction of wrinkling and springback in sheet metal forming 03005

Numerical prediction of ductile failure in the blanking process by means of uncoupled and coupled phenomenological damage models 03006

Determination of instability of a DP 980 steel sheet under different stress states based on experiment and theoretical models 03007

MS4: Advanced modeling of contact interfaces in forming

FEM-DEM coupling simulations of the tool wear characteristics in prestressed machining superalloy 04001

Finite element method analysis of surface roughness transfer in micro flexible rolling 04002

Advanced Wear Simulation for Bulk Metal Forming Processes 04003

Comparative analysis of bonding mechanism in solid state metal working processes 04004

Heat transfer modeling in asymmetrical sheet rolling of aluminium alloys with ultra high shear strain 04005

Modeling of the roll wear and material damage during high-ratio differential speed rolling of aluminium alloy 7075 04006

MS5: Advanced anisotropic constitutive equations for forming processes simulation

On twinning and anisotropy in rolled Mg alloy AZ31 under uniaxial tension 05001

Tension-compression asymmetry modelling: strategies for anisotropy parameters identification. 05002

Fracture prediction with a material model based on stress-rate dependency related with non-associated flow rule 05003

MS6: From numerical modeling of forming processes down to in-use properties

Creep age forming of Al-Cu-Li alloy: Application to thick sheet forming of double curvature aircraft panel 06001

Multi Scale Models for Flexure Deformation in Sheet Metal Forming 06002

Residual stresses of a magnesium alloy (AZ31) welded by the friction stir welding processes 06003

Modeling Metadynamic Recrystallization of a Die Steel during Ingot Breakdown Process 06004

MS7: Advanced computational methods in forming processes simulation

Simulation of nonlinear benchmarks and sheet metal forming processes using linear and quadratic solid–shell elements combined with advanced anisotropic behavior models 07001

Automatic correction of the time step in implicit simulations of thermomechanical problems 07002

Interaction of various functional elements in thin-walled cups formed by a sheet-bulk metal forming process 07003

A new shell element taking thickness-stretchability into account for mechanics-based springback compensation system 07004

An Element Free Galerkin method for an elastoplastic coupled to damage analysis 07005

MS8: Numerical modeling of additive manufacturing

Finite element modeling of deposition of ceramic material during SLM additive manufacturing 08001

Application to the additive fabrication of Object Oriented Methodology 08002

MS9: Modeling and numerical simulation of thixoforming processes

Cross dies forging: A new method to reduce forging force & price up to 80% thanks to FEM method 09001

MS10: Design, Optimization, Inverse Methods and Uncertainties in Forming Processes

Research on optimization design of conformal cooling channels in hot stamping tool based on response surface methodology and multi-objective optimization 10001

Semi-analytic parameter identification for complex yield functions 10002

Constrained design of sheet forming processes 10003

Multi-objective optimization under uncertainty for sheet metal forming 10004

Sensitivity analysis of the Expansion Process for Alloy UNS N08028 10005

Fast variable stiffness composite cylinder uncertainty analysis by using reanalysis assisted Copula function 10006

Numerical investigation of manufacturing hollow preforms by combining the processes backward cup extrusion and piercing 10007

Multi-criteria optimization strategies for production chains 10008

Rapid Tools Compensation in Sheet Metal Stamping Process 10009

A new optimization procedure for the accurate characterization of thermal phase transformation curves based on controlled quenching experiments 10010

Optimization of the single point incremental forming process for titanium sheets by using response surface 10011

Identification of material parameters using indentation test —study of the intrinsic dimensionality of P-h curves and residual imprints 10012

MS11: Advances in Forming Simulation. A Symposium in Honor of Professor J.L. Chenot

Elastic-plastic transition: A universal law 11001

Principles of polymer processing modelling 11002

Significance of the local sheet curvature in the prediction of sheet metal forming limits by necking instabilities and cracks 11003

NUMIFORM 2016: The 12^th International Conference on Numerical Methods in Industrial Forming Processes