Open Access
MATEC Web Conf.
Volume 80, 2016
NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes
Article Number 11002
Number of page(s) 7
Section MS11: Advances in Forming Simulation. A Symposium in Honor of Professor J.L. Chenot
Published online 24 October 2016
  1. J.F. Agassant, P. Avenas., P.J. Carreau, J.P. Sergent, Polymer Processing, Principles and Modeling, Hanser, Munich (1991). [Google Scholar]
  2. J.F. Agassant, M.R. Mackley, Intern. Polym. Proc., 30:121–140 (2015). [CrossRef] [Google Scholar]
  3. Z. Tadmor, C.G. Gogos, Principles of Polymer Processing, 2nd edition, Wiley, New-York (2006). [Google Scholar]
  4. H.S. Hele-Shaw, Notes on Proceedings of the Royal Institution of Great Britain, 16: 49–64 (1899). [Google Scholar]
  5. A. Cameron, Principles of lubrication, Longmans Green, London (1966). [Google Scholar]
  6. H.C. Brinkmann, Appl. Sci. Research, 2: 120–124 (1951). [Google Scholar]
  7. T. Coupez, J. Comp. Phys., 230: 2391–2405 (2011). [CrossRef] [Google Scholar]
  8. D. Arnold, F. Brezzi, F.M. Fortin, Calcolo, 23: 337–344 (1984). [Google Scholar]
  9. A.N. Brooks, T.J.R. Hughes., Computer Methods in Applied Mechanics and Engineering, 32: 199–259 (1982) [Google Scholar]
  10. L. Silva, R. Valette, P. Laure, T. Coupez, International journal of material forming, 5: 55–72 (2012). [CrossRef] [Google Scholar]
  11. L. Silva, J.F. Agassant, T. Coupez, Three dimensional injection molding simulation, In: Injection molding. Technology and fundamentals, M.R. Kamal, A. Isayev, S.J. Liu editors, Hanser, Munich, 599–651 (2009). [Google Scholar]
  12. B. Vergnes, P. Saillard, J.F. Agassant., Polym. Eng. Sci., 24: 980–987 (1984). [CrossRef] [Google Scholar]
  13. B. Vergnes, J.F. Agassant, Modélisation des écoulements dans les filières d’extrusion, Techniques de l’Ingénieur, AM 3 655, (2008). [Google Scholar]
  14. M.R. Kamal, Y. Kuo, P.H. Doan, Polym. Eng. Sci., 15: 863–868 (1975). [CrossRef] [Google Scholar]
  15. C.A. Hieber, S.F. Shen, J. Non-Newt. Fluid Mech., 7: 1–32 (1980). [CrossRef] [Google Scholar]
  16. V.W. Wang, C.A. Hieber, K.K. Wang, J. Polym. Eng., 7: 21–45 (1986). [Google Scholar]
  17. J.W. Castro, C.W. Macosko, AICHE J., 28: 250–260 (1982). [CrossRef] [Google Scholar]
  18. H. Mavridis, A.N. Hrymak, J. Vlachopoulos, Polym. Eng. Sci., 26, 449–454 (1986). [CrossRef] [Google Scholar]
  19. G.A.A.V. Haagh, G.W.M. Peters, F.N. Van De Vosse, H.E.H. Meijer, Polym. Eng. Sci., 41: 449–461 (2001). [CrossRef] [Google Scholar]
  20. L. Silva, C. Gruau, J.F. Agassant, T. Coupez, J. Mauffrey, Intern.Polym. Proc., 20: 265–273 (2005). [Google Scholar]
  21. M.R. Kamal, S. Kenig, Polym. Eng. Sci., 12: 294–301 (1972). [CrossRef] [Google Scholar]
  22. D. Huilier, J. Terrisse, M.E. de la Lande, A. Latrobe, Intern. Polym. Proc., 4: 184–190 (1988). [CrossRef] [Google Scholar]
  23. G. Titomanlio, S. Piccarolo, G.J. Levati, Appl. Polym. Sci., 35:1483–1495 (1988). [CrossRef] [Google Scholar]
  24. H.H. Chiang, C.A. Hieber, K.K. Wang, Polym. Eng. Sci., 31: 116–124 (1991). [CrossRef] [Google Scholar]
  25. G. Titomanlio, V. Brucato, M.R. Kamal, Intern. Polym. Proc., 2: 55–59 (1987). [CrossRef] [Google Scholar]
  26. O. Denizart, M. Vincent, J.F. Agassant, J. Mat. Sci., 30: 552–560 (1995). [CrossRef] [Google Scholar]
  27. F. Boitout, J.F. Agassant, M. Vincent, Intern. Polym. Proc., 3: 237–242 (1995). [CrossRef] [Google Scholar]
  28. Y. Farhoudi, M.R. Kamal, Int. J. Forming Proc., 2: 277–306 (1999). [Google Scholar]
  29. L.F.A. Douven, F.T.P. Baaijen, H.E.H. Meijer, Prog. Polym. Sci., 20 : 403–457 (1995). [CrossRef] [Google Scholar]
  30. K.K. Kabanemi, H. Vaillancourt, H. Wang, G. Salloum, Polym. Eng. Sci., 38: 21–37 (1998). [CrossRef] [Google Scholar]
  31. M.R. Kamal, R.A. Lai-Fook, J.R. Hernandez-Aguilar, Polym. Eng. Sci., 42: 1098–1114 (2002). [CrossRef] [Google Scholar]
  32. U. Langkamp, W. Michaeli, Plast. Eng., 52: 29–31 (1996). [Google Scholar]
  33. H.G. De Lorenzi, H.F. Nied, Comp. Struct., 26: 197–206 (1987). [CrossRef] [Google Scholar]
  34. A. Rodriguez-Villa, J.F. Agassant, M. Bellet, Finite element simulation of the extrusion blow-molding process, in : Simulation of material processing, theory, methods and applications, S.D. Shen and P. Dawson editors, Balkerma, Amsterdam, 1053–1058 (1995). [Google Scholar]
  35. M. Bellet, B. Monasse, J.F. Agassant, Simulation numérique des procédés de soufflage, Techniques de l’Ingénieur, AM 3705 (2000). [Google Scholar]
  36. P.C. Roozemond,, G.W.M. Peters., J. Rheology, 57:1633–1652 (2013) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.