Issue |
MATEC Web Conf.
Volume 80, 2016
NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes
|
|
---|---|---|
Article Number | 15006 | |
Number of page(s) | 5 | |
Section | Topic 3: Application to metal or multi-metal forming processes | |
DOI | https://doi.org/10.1051/matecconf/20168015006 | |
Published online | 24 October 2016 |
FEM Analysis of Punching-Process in Consideration of Micro Die Wear
1 Department of Mechanical and System Engineering, Kyoto Institute of Technology, Matsugasaki Goshokaido-cho, Sakyo-ku, 606-8585 Kyoto, Japan
2 National Institute of Technology, Nara college, Yata-cho, Yamatokooriyama-shi, 639-1080 Nara, Japan
a Corresponding author: m5623104@edu.kit.ac.jp
Detailed punching-process analysis is difficult because the punch diameter, sheet thickness, clearance, and die wear of the punching-process are approximately 10 mm, 1 mm, 100 μm, and 10 μm, respectively. Furthermore, such analyses have rarely considered die wear. Therefore, in the present study, we set the mesh size in the neighborhood of the die corner radius and the punch to 1/10 μm. Moreover, we analyze the punching process considering die wear. We investigated the stress, incremental strain, and equivalent strain for different levels of die wear.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.