Open Access
| Issue |
MATEC Web Conf.
Volume 80, 2016
NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes
|
|
|---|---|---|
| Article Number | 10002 | |
| Number of page(s) | 8 | |
| Section | MS10: Design, Optimization, Inverse Methods and Uncertainties in Forming Processes | |
| DOI | https://doi.org/10.1051/matecconf/20168010002 | |
| Published online | 24 October 2016 | |
- S. Bruschi, T. Altan, D. Banabic, P.F. Bariani, A. Brosius, J. Cao, A. Ghiotti, M. Khraisheh, M. Merklein, A.E. Tekkaya, Cirp Ann. Manuf. Techn. 23, 727–749 (2014) [Google Scholar]
- H. Tresca, Comptes Rendus Academie des Sciences 59, 754 (1864) [Google Scholar]
- R. von Mises, Göttinger Nachrichten, Math.-Phys. 4, 582–592 (1913) [Google Scholar]
- R. Hill, J. Mech. Phys. Solids 38.3, 405–417 (1990) [CrossRef] [MathSciNet] [Google Scholar]
- F. Barlat, J.C. Brem, J.W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghrat, S.-H. Choi, E. Chu, Int. J. Plasticity 19, 1297–1319 (2003) [Google Scholar]
- D. Banabic, T. Balan, D.S. Comsa, The 7th Conf. “TPR2000”, Cluj Napoca, 217–224 (2000) [Google Scholar]
- H. Vegter, A.H. van den Boogaard, Int. J. Plasticity 22, 557–580 (2006) [CrossRef] [Google Scholar]
- Q. Yin, B. Zillmann, S. Suttner, G. Gerstein, M. Biasutti, A.E. Tekkaya, M. F.-X. Wagner, M. Merklein, M. Schaper, T. Halle, A. Brosius, Int. J. Solids Struct. 51, 1066–1074 (2014) [CrossRef] [Google Scholar]
- M. Baiker, D. Helm, A. Butz, Steel Res. Int. 85 (2014) [Google Scholar]
- S. Avril, M. Bonnet, A.-S. Bretelle, M. Grédiac, F. Hild, P. Ienny, F. Latourte, D. Lemosse, S. Pagano, E. Pagnacco, F. Pierron, Exp. Mech. 48, 381–402 (2008) [CrossRef] [Google Scholar]
- A. Güner, Q. Yin, C. Soyarslan, A. Brosius, A.E. Tekkaya, Int. J. Mater. Form. 4, 121–128 (2011) [CrossRef] [Google Scholar]
- M.-S. Aydin, J. Gerlach, L. Kessler, A.E. Tekkaya, J. Mater. Process. Technol. 211, 1957–1964 (2011) [CrossRef] [Google Scholar]
- T. Bäck, L. Kessler, I. Heinle, Proc. GECCO ‘11, 1779–1786 (2011) [Google Scholar]
- T. Pottier, P. Vacher, F. Toussaint, H. Louche, T. Coudert, Exp. Mech. 52, 951–963 (2012) [CrossRef] [Google Scholar]
- Q. Yin, C. Soyarslan, A. Güner, A. Brosius, A.E. Tekkaya, Int. J. Mech. Sci. 59, 31–43 (2012) [CrossRef] [Google Scholar]
- S. Avril, F. Pierron, Y. Pannier, R. Rotinat, Exp. Mech. 48, 403–419 (2008) [CrossRef] [Google Scholar]
- M.A. Sutton, X. Deng, J. Liu, L. Yang, Exp. Mech. 36.2, 99–112 (1996) [Google Scholar]
- J.-H. Kim, F. Barlat, F Pierron, M.-G. Lee, Exp. Mech. 54, 1189–1204 (2014) [CrossRef] [Google Scholar]
- H.W. Swift, J. Mech. Phys. Solids 1, 1–18 (1952), [Google Scholar]
- W. Voelkner, P. Feldmann, Conf. Proc. Sächsische Fachtagung Umformtechnik (1994) [Google Scholar]
- D.W. Marquardt, SIAM J. Appl. Math. 11.2, 431–441 (1963) [Google Scholar]
- ASTM Standard B831-05, ASTM International, West Conshohocken, PA (2005) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.