Open Access
| Issue |
MATEC Web Conf.
Volume 80, 2016
NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes
|
|
|---|---|---|
| Article Number | 04003 | |
| Number of page(s) | 4 | |
| Section | MS4: Advanced modeling of contact interfaces in forming | |
| DOI | https://doi.org/10.1051/matecconf/20168004003 | |
| Published online | 24 October 2016 | |
- M. Knörr, Auslegung von Massivumformwerkzeugen gegen Versagen durch Ermüdung, Springer Verlag (1996) [CrossRef] [Google Scholar]
- R. Geigert, R. Balbach, Neue Einsatzbereiche durch erhöhte Präzision, Fertigungstechnisches Kolloquium 85, pp. 92–103 (1985) [CrossRef] [Google Scholar]
- E. Doege, Maschinen fur die Warmumformung und Blechformung. 9. Umformtechnisches Kolloquium, pp. 155–167 (1977). [Google Scholar]
- M. Shirgaokar, Ph. D. Thesis (2008) [Google Scholar]
- B.-A. Behrens, F. Schaefer, J. Mat. Proc. Tech., 167, pp. 309–315 (2005) [CrossRef] [Google Scholar]
- E. Rabinowicz, Friction and Wear of Materials, John Wiley and Sons (1995) [Google Scholar]
- J. F. Archard, Wear Theory and Mechanism, Wear Control Handbook, ASME, New York, pp. 35–80 (1980) [Google Scholar]
- E. Doege, H. Naegele, U. Schliephake, Proceedings of the Institution of Mechanical Engineers, 280, pp. 111–119 (1993) [Google Scholar]
- B.-A. Behrens, CIRP Annals - 57, pp. 305–308 (2008) [CrossRef] [Google Scholar]
- A. Groseclose, C. Choi, J. L. Gonzalez-Mendez, T. Altan, Estimation of Die Stresses and Wear in Warm Forging of Steel Pinion Shafts (2009) [Google Scholar]
- B.-A. Behrens, A. Bouguecha, M. Vucetic, A. Chugreev, D. Rosenbusch, ESAFORM 2016 Proceedings (2016, accepted) [Google Scholar]
- K. Ersoy, M. Labermeyer, Verschleiß sicher vorhersagen, Blech InForm, 3 (2007) [Google Scholar]
- B.-A. Behrens, A. Bouguecha, T. Hadifi, A. Klassen, Key Eng. Mat., 504–506, pp. 163–168 (2012) [CrossRef] [Google Scholar]
- M. Oqvist, Wear, 249, pp. 6–1 (2001) [CrossRef] [Google Scholar]
- C. Wang, J. Chen, Int. J. Adv. Man. Tech., 69, pp. 797–803 (2013) [CrossRef] [Google Scholar]
- H. Hoffmann, C. Hwang, K. Ersoy, CIRP Annals – Man. Tech., 54, pp. 217–220 (2005) [CrossRef] [Google Scholar]
- B.-A. Behrens, A. Bouguecha, T. Hadifi, J. Mielke, Prod. Eng. Res. Devel., 5, pp. 621–627 (2011) [CrossRef] [Google Scholar]
- B.-A. Behrens, A. Bouguecha, I. Lüken, J. Mielke, M. Bistron, Tribology in Hot Forging, Comprehensive Materials Processing, 5, pp. 211–234 (2010) [Google Scholar]
- D. J. Jeong, D. J. Kim, J. H. Kim, B. M. Kim, T. A. Dean, J. Mat. Proc. Tech., 113, pp. 544–550, (2001). [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.